---

写在前面

本系列相关博文链接：

Verilog初级教程（8）Verilog中的assign语句

Verilog初级教程（7）Verilog模块例化以及悬空端口的处理

Verilog初级教程（6）Verilog模块与端口

Verilog初级教程（5）Verilog中的多维数组和存储器

Verilog初级教程（4）Verilog中的标量与向量

Verilog初级教程（3）Verilog 数据类型

Verilog初级教程（2）Verilog HDL的初级语法

Verilog初级教程（1）认识 Verilog HDL

芯片设计抽象层及其设计风格

Verilog以及VHDL所倡导的的代码准则

FPGA/ASIC初学者应该学习Verilog还是VHDL？

• 个人微信公众号： FPGA LAB

• 个人博客首页

• 注：学习交流使用！

---

正文

不能处理的数据是没有用的，在数字电路和计算机系统中总是需要一些形式的计算，让我们来看看Verilog中的一些运算符，这些运算符可以使综合工具实现相应的硬件元素。

Verilog算术运算符

Operator	Description
a + b	a plus b
a - b	a minus b
a * b	a multiplied by b
a / b	a divided by b
a %	b a modulo b
a ** b	a to the power of b

仿真文件

 
module des;reg [7:0]  data1;reg [7:0]  data2;initial begindata1 = 45;data2 = 9;$display ("Add + = %d", data1 + data2);$display ("Sub - = %d", data1 - data2);$display ("Mul * = %d", data1 * data2);$display ("Div / = %d", data1 / data2);$display ("Mod %% = %d", data1 % data2);$display ("Pow ** = %d", data2 ** 2);end
endmodule

仿真结果：

ncsim> run
Add + =  54
Sub - =  36
Mul * = 149
Div / =   5
Mod % =   0
Pow ** =  81
ncsim: *W,RNQUIE: Simulation is complete.

Verilog关系运算符

Operator	Description
a < b	a less than b
a > b	a greater than b
a <= b	a less than or equal to b
a >= b	a greater than or equal to b

仿真文件

module des;reg [7:0]  data1;reg [7:0]  data2;initial begindata1 = 45;data2 = 9;$display ("Result for data1 >= data2 : %0d", data1 >= data2);data1 = 45;data2 = 45;$display ("Result for data1 <= data2 : %0d", data1 <= data2);data1 = 9;data2 = 8;$display ("Result for data1 > data2 : %0d", data1 > data2);data1 = 22;data2 = 22;$display ("Result for data1 < data2 : %0d", data1 < data2);end
endmodule

仿真结果：

ncsim> run
Result for data1 >= data2 : 1
Result for data1 <= data2 : 1 Result for data1 > data2 : 1
Result for data1 < data2 : 0
ncsim: *W,RNQUIE: Simulation is complete.

Verilog等价运算符

Operator	Description
a === b	a equal to b, including x and z
a !== b	a not equal to b, including x and z
a == b	a equal to b, result can be unknown
a != b	a not equal to b, result can be unknown

仿真文件

module des;reg [7:0]  data1;reg [7:0]  data2;initial begindata1 = 45;     data2 = 9;      $display ("Result for data1(%0d) === data2(%0d) : %0d", data1, data2, data1 === data2);data1 = 'b101x; data2 = 'b1011; $display ("Result for data1(%0b) === data2(%0b) : %0d", data1, data2, data1 === data2);data1 = 'b101x; data2 = 'b101x; $display ("Result for data1(%0b) === data2(%0b) : %0d", data1, data2, data1 === data2);data1 = 'b101z; data2 = 'b1z00; $display ("Result for data1(%0b) !== data2(%0b) : %0d", data1, data2, data1 !== data2);data1 = 39;     data2 = 39;     $display ("Result for data1(%0d) == data2(%0d) : %0d", data1, data2, data1 == data2);data1 = 14;     data2 = 14;     $display ("Result for data1(%0d) != data2(%0d) : %0d", data1, data2, data1 != data2);  end
endmodule

仿真结果

ncsim> run
Result for data1(45) === data2(9) : 0
Result for data1(101x) === data2(1011) : 0
Result for data1(101x) === data2(101x) : 1
Result for data1(101z) !== data2(1z00) : 1
Result for data1(39) == data2(39) : 1
Result for data1(14) != data2(14) : 0
ncsim: *W,RNQUIE: Simulation is complete.

Verilog逻辑运算符

Operator	Description
a && b	evaluates to true if a and b are true
a || b	evaluates to true if a or b are true
!a	Converts non-zero value to zero, and vice versa

仿真文件

module des;reg [7:0]  data1;reg [7:0]  data2;initial begindata1 = 45;     data2 = 9; $display ("Result of data1(%0d) && data2(%0d) : %0d", data1, data2, data1 && data2);data1 = 0;      data2 = 4; $display ("Result of data1(%0d) && data2(%0d) : %0d", data1, data2, data1 && data2);data1 = 'dx;    data2 = 3; $display ("Result of data1(%0d) && data2(%0d) : %0d", data1, data2, data1 && data2);data1 = 'b101z; data2 = 5; $display ("Result of data1(%0d) && data2(%0d) : %0d", data1, data2, data1 && data2);data1 = 45;     data2 = 9; $display ("Result of data1(%0d) || data2(%0d) : %0d", data1, data2, data1 || data2);data1 = 0;      data2 = 4; $display ("Result of data1(%0d) || data2(%0d) : %0d", data1, data2, data1 || data2);data1 = 'dx;    data2 = 3; $display ("Result of data1(%0d) || data2(%0d) : %0d", data1, data2, data1 || data2);data1 = 'b101z; data2 = 5; $display ("Result of data1(%0d) || data2(%0d) : %0d", data1, data2, data1 || data2);data1 = 4;                 $display ("Result of !data1(%0d) : %0d", data1, !data1);data1 = 0;                 $display ("Result of !data1(%0d) : %0d", data1, !data1);    end
endmodule

仿真结果：

ncsim> run
Result of data1(45) && data2(9) : 1
Result of data1(0) && data2(4) : 0
Result of data1(x) && data2(3) : x
Result of data1(Z) && data2(5) : 1
Result of data1(45) || data2(9) : 1
Result of data1(0) || data2(4) : 1
Result of data1(x) || data2(3) : 1
Result of data1(Z) || data2(5) : 1
Result of !data1(4) : 0
Result of !data1(0) : 1
ncsim: *W,RNQUIE: Simulation is complete.

Verilog位元运算符

&	0	1	x	z
0	0	0	0	0
1	0	1	x	x
x	0	x	x	x
z	0	x	x	x

|	0	1	x	z
0	0	1	x	x
1	1	1	1	1
x	x	1	x	x
z	x	1	x	x

value	0	1	x	z
~	1	0	x	x

仿真文件

module des;reg      data1 [4] ;reg      data2 [4] ;int      i, j;initial begindata1[0] = 0;  data2[0] = 0;data1[1] = 1;  data2[1] = 1;data1[2] = 'x; data2[2] = 'x;data1[3] = 'z; data2[3] = 'z;for (i = 0; i < 4; i += 1) beginfor (j = 0; j < 4; j += 1) begin$display ("data1(%0d) & data2(%0d) = %0d", data1[i], data2[j], data1[i] & data2[j]);endendend
endmodule

仿真结果：

ncsim> run
data1(0) & data2(0) = 0
data1(0) & data2(1) = 0
data1(0) & data2(x) = 0
data1(0) & data2(z) = 0
data1(1) & data2(0) = 0
data1(1) & data2(1) = 1
data1(1) & data2(x) = x
data1(1) & data2(z) = x
data1(x) & data2(0) = 0
data1(x) & data2(1) = x
data1(x) & data2(x) = x
data1(x) & data2(z) = x
data1(z) & data2(0) = 0
data1(z) & data2(1) = x
data1(z) & data2(x) = x
data1(z) & data2(z) = x
ncsim: *W,RNQUIE: Simulation is complete.

Verilog移位运算符

• 逻辑移位： << and >>
• 算术移位 ：<<< and >>>

仿真文件：

module des;reg [7:0] data;int       i;initial begindata = 8'h1;$display ("Original data = 'd%0d or 'b%0b", data, data);for (i = 0; i < 8; i +=1 ) begin$display ("data << %0d = 'b%b", i, data << i);enddata = 8'h80;$display ("Original data = 'd%0d or 'b%0b", data, data);for (i = 0; i < 8; i +=1 ) begin$display ("data >> %0d = 'b%b", i, data >> i);enddata = 8'h1;$display ("
data >> 1 = 'b%b", data >> 1);end
endmodule

仿真结果：

ncsim> run
Original data = 'd1 or 'b00000001
data << 0 = 'b00000001
data << 1 = 'b00000010
data << 2 = 'b00000100
data << 3 = 'b00001000
data << 4 = 'b00010000
data << 5 = 'b00100000
data << 6 = 'b01000000
data << 7 = 'b10000000
Original data = 'd128 or 'b10000000
data >> 0 = 'b10000000
data >> 1 = 'b01000000
data >> 2 = 'b00100000
data >> 3 = 'b00010000
data >> 4 = 'b00001000
data >> 5 = 'b00000100
data >> 6 = 'b00000010
data >> 7 = 'b00000001data >> 1 = 'b00000000
ncsim: *W,RNQUIE: Simulation is complete.

---

参考资料

• 参考资料1
• 参考资料2

---

交个朋友

• 个人微信公众号：FPGA LAB

• 知乎：李锐博恩

• FPGA/IC技术交流2020