---

1.auto_dump.sh

#!/bin/bashwork_path=$(pwd)
conf_file_path="${work_path}/auto_dump.cfg"
dst_dir_path=""
search_path="/var/log"if [ $# -ne 1 ];thenprogram=$(basename "$0")echo "Usage: $program <dst_dir_path>"echo "Examples：$program /root/os_log/"exit
elsedst_dir_path=$1
ficat $conf_file_path | while read conf_path_line
dolast_file_path=$(basename ${conf_path_line})#last_file_path=${conf_path_line##*/}tmp=${conf_path_line%/*}last_dir_path=${tmp##*/}  # network find $search_path -name $last_file_path | while read search_path_linedomkdir -p $dst_dir_pathdst_file_path=$dst_dir_path/tmp/$last_dir_path/mkdir -p $dst_file_pathcp $search_path_line $dst_file_pathdonecd $dst_dir_path/tmp/if [ ! -f $conf_path_line ];thenecho $conf_path_line" not found"fi
done

2.auto_dump.cfg

network/ip.log
network/netstate.log
network/route.log
network/arp.log
network/services.log
hardware/dmidecode.log
hardware/cmdline.log
hardware/cpuinfo.log
hardware/meminfo.log
hardware/lsblk.log
hardware/mount.log
hardware/interrupts.log
hardware/lspci.log
hardware/smartctl.log
hardware/modules.log
hardware/version.log
message/alert.log
message/audit.log
message/btmp.log
message/crit.log
message/debug.log
message/dmesg.log
message/err.log
message/info.log
message/messages.log
message/notice.log
message/syslog.log
message/warning.log
message/wtmp.log

3.auto_dump.sh

#!/bin/bashdst_dir_path="/home/os_log"
dst_dir_path_filenum=10mkdir_tmp(){mkdir -p $dst_dir_path/tmp/networkmkdir -p $dst_dir_path/tmp/hardwaremkdir -p $dst_dir_path/tmp/message/var/log
}write_network(){ifconfig > $dst_dir_path/tmp/network/ip.lognetstat > $dst_dir_path/tmp/network/netstate.logroute > $dst_dir_path/tmp/network/route.logarp > $dst_dir_path/tmp/network/arp.logsystemctl -all > $dst_dir_path/tmp/network/services.log
}write_hardware(){dmidecode > $dst_dir_path/tmp/hardware/dmidecode.logcat /proc/cmdline > $dst_dir_path/tmp/hardware/cmdline.logcat /proc/cpuinfo > $dst_dir_path/tmp/hardware/cpuinfo.logcat /proc/meminfo > $dst_dir_path/tmp/hardware/meminfo.loglsblk > $dst_dir_path/tmp/hardware/lsblk.logmount > $dst_dir_path/tmp/hardware/mount.logcat /proc/interrupts > $dst_dir_path/tmp/hardware/interrupts.loglspci > $dst_dir_path/tmp/hardware/lspci.logif [ -f $dst_dir_path/tmp/hardware/smartctl.log ];thenrm $dst_dir_path/tmp/hardware/smartctl.logfifdisk -l | grep "/dev/sd" | awk '{print $2}' | awk -F ':' '{print $1}' > tmp cat tmp | while read linedosmartctl -a $line >> $dst_dir_path/tmp/hardware/smartctl.logdonerm tmpfdisk -l | grep "/dev/nvme" | head -1 | awk '{print $2}' | awk -F ':' '{print $1}' > tmp cat tmp | while read linedosmartctl -a $line >> $dst_dir_path/tmp/hardware/smartctl.logdonerm tmpcat /proc/modules > $dst_dir_path/tmp/hardware/modules.logcat /proc/version > $dst_dir_path/tmp/hardware/version.log
}tar_log(){cp -rf /var/log/* $dst_dir_path/tmp/message/var/logcd $dst_dir_path/tmptar -czf log.tar.gz *mv log.tar.gz $dst_dir_path/log.tar.gzrm -rf $dst_dir_path/tmp
}mov_log(){if [ -f $dst_dir_path/log.9.tar.gz ];thenrm $dst_dir_path/log.9.tar.gzfiif [ -f $dst_dir_path/log.tar.gz ] && [ ! -f $dst_dir_path/log.9.tar.gz ];thenfor((i=$(($dst_dir_path_filenum-2));i>=1;i--))doif [ -f $dst_dir_path/log.$i.tar.gz ];thenmv $dst_dir_path/log.$i.tar.gz $dst_dir_path/log.$(($i+1)).tar.gzfidonemv $dst_dir_path/log.tar.gz $dst_dir_path/log.1.tar.gzfi
}mkdir_tmp
write_network
write_hardware
mov_log
tar_log################################################################################
if [ -f $dst_dir_path/log.9.tar.gz ];thenrm $dst_dir_path/log.1.tar.gzfor((j=2;j<=$(($dst_dir_path_file_num-1));j++))domv $dst_dir_path/log.$j.tar.gz $dst_dir_path/log.$(($j-1)).tar.gzdonemv $dst_dir_path/log.tar.gz $dst_dir_path/log.9.tar.gz
fiif [ -f $dst_dir_path/log.tar.gz ] && [ ! -f $dst_dir_path/log.9.tar.gz ];thenfor((i=1;i<=$(($dst_dir_path_file_num-1));i++))do	if [ -f $dst_dir_path/log.$i.tar.gz ];thencontinuefimv $dst_dir_path/log.tar.gz $dst_dir_path/log.$i.tar.gzbreakdone
fi# filenum=$(ls -l | wc -l)
# if [ $filenum -eq 12 ];then
#     rm -f `ls -tr | head -1`
# fii=0
filenum=0
for i in $(ls)
doif [ -f $i ]thenlet filenum+=1fiif [ $filenum==10 ];thenrm `ls -tr $(find . -type f -name "log_*") | head -1`breakfi
doneif [ -f $dst_dir_path/log.tar ];thenmv $dst_dir_path/log.tar $dst_dir_path/log_$(date "+%Y-%m-%d_%H:%M:%S")_bak.tar
fi

4.reload_fpga_uio_driver.sh

insmod与modprobe都是载入 kernel module，不过一般差别于modprobe能够处理module载入的相依问题。你要载入a module，但是a module要求系统先载入b module时，直接用insmod挂入通常都会出现错误讯息，不过modprobe倒是能够知道先载入b module后才载入a module，如此相依性就会满足。

#!/bin/bash
modprobe uio
cd /home
insmod ifc_uio.koecho 16 > /sys/bus/pci/devices/0000\:b1\:00.0/max_vfs

5.get_fpga_temp.sh

#!/bin/bash
echo "unload FPGA UIO driver"
echo 0 > /sys/bus/pci/devices/0000\:b1\:00.0/max_vfs
rmmod ifc_uio
rmmod uioecho "get FPGA temperature"
cd /home/fpga_temperature_voltage/s10_rsu_over_pcie_ori
./install
cd ..
./fpga_temperature_voltage./s10_rsu_over_pcie_ori/unload 

6.ethernet_port.sh

#!/bin/bash
echo "**************************************Ethernet port test start*************************************"
modprobe uio
cd /home
insmod ifc_uio.ko
echo 16 > /sys/bus/pci/devices/0000\:b1\:00.0/max_vfsfor((i=1;i<=12;i++))
doecho "******************************Do Port $i setup*******************************************************"./fpga_test /sys/bus/pci/devices/0000\:b1\:00.0/resource2 --eth -p $i --gen -P./fpga_test /sys/bus/pci/devices/0000\:b1\:00.0/resource2 --eth -p $i --gen -s./fpga_test /sys/bus/pci/devices/0000\:b1\:00.0/resource2 --eth -p $i --gen -c >/dev/null./fpga_test /sys/bus/pci/devices/0000\:b1\:00.0/resource2 --eth -p $i --chk -c >/dev/null./fpga_test /sys/bus/pci/devices/0000\:b1\:00.0/resource2 --eth -p $i --mux -c >/dev/nullsleep 1./fpga_test /sys/bus/pci/devices/0000\:b1\:00.0/resource2 --eth -p $i --gen --pkt --min 64 --max 64 --mode 256 --gap 1 -Ssleep 2./fpga_test /sys/bus/pci/devices/0000\:b1\:00.0/resource2 --eth -p $i --gen -s
donewhile((1))
dofor((i=1;i<=12;i++))doecho "****************************Show port $i test log*******************************************"./fpga_test /sys/bus/pci/devices/0000\:b1\:00.0/resource2 --eth -p $i --gen -C./fpga_test /sys/bus/pci/devices/0000\:b1\:00.0/resource2 --eth -p $i --chk -C./fpga_test /sys/bus/pci/devices/0000\:b1\:00.0/resource2 --eth -p $i --mux -C./fpga_test /sys/bus/pci/devices/0000\:b1\:00.0/resource2 --eth -p $i --gen -s./fpga_test /sys/bus/pci/devices/0000\:b1\:00.0/resource2 --versleep 3done
done

7.ddr_test.sh

#!/bin/bash
echo "******************************* DDR stress start **********************************"
modprobe uio
cd /home
insmod ifc_uio.ko
echo 16 > /sys/bus/pci/devices/0000\:b1\:00.0/max_vfsfor((i=0;i<4;i++))
doecho "*******************************Do DDR Channel $i setup******************************************"./fpga_test /sys/bus/pci/devices/0000\:b1\:00.0/resource2 --ddr -n $i -csleep 1./fpga_test /sys/bus/pci/devices/0000\:b1\:00.0/resource2 --ddr -n $i -1 0 -2 0 -3 0 -T 0 -Ssleep 2
donewhile ((1))
dofor((i=0;i<4;i++))doecho "**************************** Show DDR Channel $i test log **************************"./fpga_test /sys/bus/pci/devices/0000\:b1\:00.0/resource2 --ddr -n $i -Csleep 2done
done