ALM / QC 64-bit Patch 12 S-Chinese
|
» Register to receive e-mail notifications
Should I download?Download LinkDOWNLOAD PATCHProduct(s)TD4QC 11 Hardware platforms - OS releaseswindows: 2003-x64 2008-x64 CriticalYes TD4QC_00304: HANG CORRUPTION ABORT OTHER HANG QCCR1J27309 HANG QCCR1J28015 HANG QCCR1J28568 HANG QCCR1J28687 HANG QCCR1J28696 HANG QCCR1J26782 HANG QCCR1J27165 HANG QCCR1J28518 HANG QCCR1J29182 CORRUPTION QCCR1J27830 HANG QCCR1J25736 HANG QCCR1J25750 HANG QCCR1J22456 CORRUPTION QCCR1J23544 HANG QCCR1J24527 HANG QCCR1J24091 HANG QCCR1J23675 HANG QCCR1J24598 HANG QCCR1J24871 HANG QCCR1J24194 HANG QCCR1J25145 HANG QCCR1J24166 OTHER QCCR1J25832 ABORT QCCR1J25578 ABORT 184682 CORRUPTION QCCR1J23542 HANG QCCR1J23650 OTHER QCCR1J16090 OTHER QCCR1J19547TD4QC_00235: OTHER ABORT HANG OTHER: Change Request QCCR1J16090 OTHER: Change Request QCCR1J19547 ABORT: Change Request 98072 HANG: Change Request: 97617 SummaryQCCR1J25187 / QCCR1J29180 - Spaces in a defect description that contain Korean characters were replaced by carriage return (new line) characters when exported to Microsoft Excel. QCCR1J27722 - Filtering defects using the [CurrentUser] value did not work properly if the user name was capitalized and Oracle was the DBMS of the project. QCCR1J27845 - Adding new text and table structure to the Comments field of a defect distorted the comment's content. QCCR1J28015 - The "Field requires a value from the corresponding list" error was displayed when changing the value of a field that is linked to a list in a newly-created defect.QCCR1J27421 - Filtering a large requirements tree view while maintaining a hierarchical structure was slower than expected. QCCR1J28429 - The addition of columns to the Traced to Requirements tab in the Traceability Matrix view were not saved as part of the Favorite filter. QCCR1J28442 - Importing business models under certain condition caused an exception and the following error was displayed: "Failed to Import Model Post Process; Unexpected failure in getValuePostProcess;..." QCCR1J28727 - When creating a copy of a project that has images in the rich text portion of the requirements, the images were not retained in the copied entities. QCCR1J28687 - Requirements copied from a particular project and pasted into another project resulted in the Target Release and Target Cycle fields being updated with default values. Tests Module QCCR1J27773 - Retrieving the entire result set of the Runs view under Test Instance Details using the "Retrieve all <x> results" link did not show the expected full result set. QCCR1J27810 - Adding a large number of tests (over 2,000) to a test set at once was not possible. QCCR1J27899 - Tests could not be imported using the Microsoft Excel add-in in HP ALM 11 projects that were upgraded from Quality Center 10.00. QCCR1J27950 - When creating a new design step, the focus was on the Step Name field instead of the Description. QCCR1J28529 - When creating child folders to a folder already assigned to a cycle in the Test Lab module, only the first child folder inherited the cycle assignment. QCCR1J28695 - The modification of the Actual field of test step were not kept if the filter of the steps was modified while the cursor was kept in the Actual field. QCCR1J28696 - Changes to the Requirement Coverage on tests were not retained if the project is managed by version control. QCCR1J28771 - Text of a design step that was formatted using automatic numbering or bullets was not displayed properly in the Step Details of the Last Run Report. QCCR1J28833 - Pasting large test sets in version-controlled projects using Oracle took a considerable amount of time to complete. QCCR1J27301 - The re-ordering of tests in Execution Flow tab of the Test Lab module was not visible in the Execution Grid in the Automatic Runner. QCCR1J27831 - Test memo fields' values were displayed improperly when accessing ALM using the Korean Windows XP SP3 operating system. QCCR1J28073 - User could not move test set folders, even if the users had permission to do so.QCCR1J29337 - An error occurred for some projects having large number of tests when adding components to tests. QCCR1J28892 - The Iterations window could not be opened when group of components are specified in a test script having many iterations. QCCR1J24481- The reference to a test case flow was not properly pasted or imported after copying or exporting a business process test case that makes use of flows. QCCR1J28728 - The component name was reset with a default one after requesting a component in the Test Plan module and then adding steps and parameters before submitting. QCCR1J29361 - Saving the modified value of business process tests by pressing the <Enter> key displayed an error. QCCR1J27480 - The test coverage indication in the requirements view was incorrect after the criterion of the test coverage was modified. QCCR1J28150 - An application area could not be opened by pressing the Launch QTP button, namely when a new application area was created that uses the .Net, WPF and Web add-ins. QCCR1J28512 - The output parameter values of a business process test, whose execution lingers, were not kept. QCCR1J28945 - Library synchronization failed when components were deleted in both the Export and Import sides.QCCR1J27507 - An exception occurred when executing Load Runner 11.04 from ALM.QCCR1J28041 / QCCR1J28225 - The srunner.ocx component issued an exception after running VAPI-XP tests in ALM.QCCR1J29211 - Memory consumption was not properly cleared when traversing the Test Set module using API. QCCR1J28207 - In specific cases of integrating Executive Scorecard (XS) 9.30 and HP ALM 11.00 over Oracle, the API call result returned an ORA-01795 error. QCCR1J28454 - In a newly-created test set, the Type system field did not get a value when the test set was added using API. As a result the test set could not be opened.QCCR1J27309 - The renaming of folders was not synchronized properly from baselines. QCCR1J28568 - The Import of libraries failed for specific projects created in ALM Chinese edition. QCCR1J28569 - Requirements were not synchronized between projects if the requirements were added to a library individually and not within a folder. QCCR1J28332 - Synchronizing libraries between projects using baselines failed with an error. QCCR1J28953 - Synchronization resulted in an error after deleting a folder and all its subentities in a target project, while in the source project addition and deletion took place under the same folder.QCCR1J28517 - Accessing very complex QuickTest Professional tests caused QuickTest Professional to stop responding. QCCR1J29103 - Loading tests into QuickTest Professional took a considerable amount of time, especially when opening tests with calls to external actions using relative paths. Install the QTP_00990 QuickTest Professional hotfix.QCCR1J29119 - The ALM client did not respond after switching to the Execution Flow tab of a test plan of a QuickTest Professional test that was run with multiple iterations.QCCR1J28815 - Defect fields that are hidden using the data-hiding filter were not accessible for read and write actions using workflow script. QCCR1J17786 - Removing a Host from the Host Manager using the RemoveHost API method resulted in an error. Installation QCCR1J26685 - The MMerge.exe and QCClient.PerformanceMonitor.UI.exe files failed to download when installing the client from Internet Explorer. Reports QCCR1J28358 - In version-controlled projects, when creating a test lab report using the Document Generator, the version-related information was not included in the resulting document.QCCR1J29222 - The ALM client could not connect over a Forefront Threat Management Gateway server. QCCR1J29655 - The ALM login page could not be reached when trying to access it through Citrix Netscaler over HTTPS. QCCR1J24647 - Import of a release from a template failed due to the attempt to employ an additional connection to the template. QCCR1J26731 - Customization information that is cached on the client side did not affect the login time. Now the cached information is properly used and the login time is reduced. QCCR1J27055 - The Replace option used in a test plan view that is filtered by date field replaced all tests regardless of the set filter. QCCR1J27759 - The name of customized module was not displayed as expected. Module name is set by default to the Module ID. You can explicitly set the Module display name by adding the following tag to the config file: <Parameter name="DisplayName" value="DisplayName "/> QCCR1J27988 - The dialog box that is displayed in the Verify/Apply project template process showed a Cancel button instead of a Close button. QCCR1J28612 - ALM did not display user-defined lists of type "user list" as a condition criterion in the Automail section of project customization. QCCR1J28999 - The custom properties of a Microsoft Word document that utilizes the HP ALM Word Add-in were cleared after saving the document. QCCR1J28571 - The User Name and Domain fields of the Auto Restart Setting dialog box of the ALM System Test Agent were read-only when executed on a Windows 7 64bit operating system. QCCR1J29483 - Slow response was observed in large projects having BP hiding filters. QCCR1J24976 - Business Process Modeling import issues occurred with QualiWare Lifecycle Manager (QLM), a business process modeling tool. QCCR1J24642 - Tests that are linked to a test set were not displayed as linked upon changing the test coverage of a version-controlled project. QCCR1J29811 - Upgrade issues were encountered in previous patches in cases where ALM 11.00 was installed as "copy and upgrade" for Quality Center 9.20 / Quality Center 10.00. QCCR1J28902 - Choosing the "Do not show this dialog box again" option in the Choose Client Certificate dialog box resulted in the inability of the ALM client to connect to the ALM server.QCCR1J21211- An error occurred when generating a project report for requirements using a cross-filter.QCCR1J26941 - Ancestors of requirement records were not displayed in a project report even if the Keep Hierarchy option was checked in cases where the filter being used related to a parent field.QCCR1J27120 - Reports were not printed properly when HP ALM was running on a Windows 7 64-bit operating system using Internet Explorer 9.QCCR1J28518 - The progress graph displayed data for entities that are missing their historical information. Now the progress is based only on entities with historical information (i.e., Audit log).QCCR1J27230 - Migration of Performance Center projects (with more than 1000 tests) using the PC migration tool failed. Either the project tests were not migrated or the migration failed to complete, because of a deadlock.QCCR1J26772 - User-defined fields added to the Releases module using an OTA based tool in HP Quality Center 10.00 were missing after the project was upgraded to HP ALM 11.00.QCCR1J27330 - An error occurred when viewing the coverage analysis of requirements for which tests were automatically generated.QCCR1J27126 - An error was encountered during library synchronization of an ALM project. A deleted resource caused a NullPointerException that in turn led to a library synchronization failure. Business Process Testing QCCR1J28023 - When running a business process test or flow with UFT, a redundant call was made to the server.QCCR1J27395 - Check-in and check-out of business process tests did not work properly due to an internal query block.QCCR1J26709 - A user that is assigned to a group that is permitted to create and update design steps could not create a new design step by means of copy/paste, and could not use the renumbering functionality. To have this fix take effect, follow these steps: 1. Add the following line to the "verify_tasks_deep.xml" file that is located under "repository\sa\DomsInfo\MaintenanceData\ conf" folder: <ENTRY VALUE="com.mercury.td.saserver.maintenan ce.verify. EntityUpdatePermissionInconsistencyTask" /> 2. Add the following line to the "repair_tasks.xml" file that is located in the same folder as the above file: <RepairData class="com.mercury.td.saserver.maintenan ce.repair. EntityUpdatePermissionInconsistencyRepai rer"/> 3. Restart the ALM server. 4. Run the Project Repair tool.For the full instruction please refer to http://support.openview.hp.com/selfsolve /document/KM00209162. QCCR1J27319 - The search criteria for tests were not retained after selecting a test from the search output, adding requirements to it, and returning back to the search result view. QCCR1J26969 - After deleting one step out of many in a test script, the first step became the current record in the list instead of the step that preceded the deleted one. QCCR1J26912 - The drop down option of the Search field in the Test plan module that keeps the previous searches was populated with redundant empty lines for every component one navigated to after a given search. QCCR1J27554 - An error occurred when switching to the Application Area tab of a test resource after a library was imported into the project.QCCR1J26871 - In Test Lab, selected CC recipients for email notifications were not saved. QCCR1J27426 - In a version controlled project, the mark of a used parameter was not properly removed after a design step using the parameter was deleted. QCCR1J27163 - The test parameter field TP_DEFAULT_VALUE could not be modified by all the custom groups that have permission to modify it. QCCR1J27210 - When adding tests to a test set using a filter, tests not included in the filter were added to the test set when a user clicks the Subject (root) folder while adding tests from the filtered Test Plan tree. QCCR1J26902 - Actual values of a test configuration were not saved after setting these values using the Copy Default Values option. QCCR1J27002 - When Smart Repository was enabled, copying a test with run results resulted in orphan records in the SMART_REPOSITORY_LOGICAL_FILE table. QCCR1J27334 - User could not delete a test Instance in cases where the Delete Test Instance and Delete Run permissions were set to "By owner only" even if the same user was the owner of those entities. 198613 - The Planned Host Name field in the Test Lab -> Test Set Execution Grid does not provide a dropdown arrow for choosing the name. QCCR1J26931 - QuickTest Professional was unable to connect to HP ALM through HP Partner Reverse (Web) Proxy. QCCR1J26249 - Sprinter could not connect to HP ALM through a reverse proxy with digital certificate authentication. QCCR1J26055 - An HP ALM deployment integrated with SiteMinder for authorization resulted in an occasional "Invalid Server Response" error message a few hours after initial connection.QCCR1J26782 - Cancelling the _FieldCanChange function in a workflow did not restore the old value of the corresponding field. This defect was encountered when using ALM Explorer and advancing to a field other than the validated field.QCCR1J26804 - An error occurred when refreshing a subfolder in the Test Plan module using a workflow script.QCCR1J27422 - Values of TestSetTest_Field of a workflow were not retrieved consistently when running a manual test run.QCCR1J27193 - In a Test Lab workflow script, the value of the step's Test ID field (i.e., Step_Fields.Field("ST_TEST_ID")) returned the test name instead of the test ID. Version Control QCCR1J23015 - When editing a lookup-list field for a checked-in entity, the checkout worked as expected but the modified value was not kept. Site Administration QCCR1J27385 - In shared mode installation, the client files used by Site Administration were stored under the user's profile location instead of under a shared location. QCCR1J27634 - An error occurred when importing users from LDAP by keyword and the result of the LDAP query was empty. QCCR1J27529 - When deleting a user from the Site Administration console while the user entry is locked in the Project User list of project customization, the user record is kept in the project users list though not displayed in the Site Administration users list. Microsoft Word Add-in QCCR1J28062 - An error was encountered when requirements were imported into HP ALM using the MS Word add-in and the number of imported requirements exceeded 32,000.QCCR1J27830 - A redundant warning message of "Removing a field may result in data loss" appeared when performing cross project customization and clicking the Verify button. QCCRIJ24904 - An error occurred when viewing the history of an entity after a user-defined field, that initially had its History option enabled, had the History option removed and then the user-defined field was deleted entirely. Now, upon deleting a user-defined field, its previously-recorded history is also deleted.QCCR1J25185 - If Korean characters were typed in the body of a mail, space characters were replaced by new line characters when the mail is received.QCCR1J27115 - The display of the progress bar indicating the progress of uploading or downloading an attachment did not reflect the actual progress. QCCR1J25852 - Download of attachments that are larger than 2GB was not possible. QCCR1J26493 - In certain scenarios, the message "Invalid Server Response" was issued repeatedly by the HP ALM client. QCCR1J26789 - An error was encountered when a project was created by copying data from an existing project and all project content options were selected. QCCR1J26818 - Read-only memo fields that are displayed in a grid were missing the drop down option to expand their content for full viewing. The drop down option is not available in the following grids that are entirely read-only: * Tests grid in Business Models module > Linkage tab * Business Model Linkage in Requirements module * Graphs' drill down resultsQCCR1J26790 - Hiding the indication columns in grid views was not kept persistent for consecutive sessions.QCCR1J27189 - Non-English diacritics (e.g., umlaut) in defect data were not exported properly to a Word file.QCCR1J27973 - HP ALM server installed with the Performance Center extension reached an out-of-memory state in case a folder had over 4 million files.QCCRIJ27463 - ALM Explorer running on Windows XP SP3 having Internet Explorer 6 installed and using a proxy server did not perform properly.QCCRIJ27494 - After reaching the high limit of the Smart Repository, user cannot create components and attachments and receives an error.QCCRIJ27100 - MSI Installation - Running a generated MSI installation with Shared Deployment mode failed when no network connection was available.QCCR1J27389 - The SQL statement used for Test Set queries did not bind literal values causing each individual statement to be parsed and cached individually. Now binding is used to consolidate many individual statements into a single structure.QCCR1J27197 - A memory leak was found in the utilization of Spider.QCCR1J25555 - New entities could not be created in a newly-created project whose Customization data was copied from a different project.QCCR1J26864 - Updates to the summary field of a defect were kept only on a consecutive update when the update was made in grid view.QCCR1J25628 - An "Out of context" warning message was displayed while selecting attached files in the New Defect dialog window.QCCR1J24516 - The filter of coverage analysis view did not work as expected and the Test Coverage chart displayed incorrect data. QCCR1J24952 - When generating Excel reports, some superfluous newline and carriage return characters were added.QCCR1J27074 - Graph output was inconsistent when generated for three or more projects.QCCR1J24949 - Excel reports containing memo fields caused inconsistent exceptions.QCCR1J26045 - Project reports with a Design Steps section and a Design Step Attachments subsection failed due to an unexpected server error.QCCR1J25491 - ALM tables that are used by Excel reports were locked upon generating the report.QCCR1J26561 - Numeric user-defined fields (UDFs) that were used in Excel reports' Post Processing scripts were handled as strings. This caused post processing to fail.QCCR1J25537 - In some cases, where the ALM client runs on a Windows 7 operating system with Office 2010 installed, generating Excel reports resulted in an error.QCCR1J26169 - The configuration of a graph defined for requirements did not show the Name field as the X-Axis field. This resulted in upgraded reports that showed no X-Axis description.QCCR1J24892 - The Coverage analysis view in the Requirements module showed empty results when the analysis type was set to Execution, the filter was set to a specific cycle, and a cross filter was defined for test configuration.QCCR1J24516 - The test coverage pie chart did not follow the module's filter settings.QCCR1J24964 - The Drill-Down option of Analysis Graphs did not display newly-linked entities.QCCR1J25857 - Doc Generator failed to complete when executed for QTP tests having function calls.QCCR1J25856 - Custom Memo fields applied from template were not included in Doc Generator reports with "Full Page" Layout.QCCR1J25850 - Silent installation of ALM failed when a deployment path other than the default was used.QCCR1J15127 - Users assigned to a group with "Change Comment" permission only were able to move requirements between folders by means of drag and drop.QCCR1J25358 - Traceability matrix did not work when a data hiding filter was defined. QCCR1J24582 - Updating multiple, selected requirements with Target Release and Target Cycle required a validation confirmation for each requirement folder. Now, the validation confirmation is required only once. QCCR1J25905 - An error was displayed when changing the type of a requirement in the Details pane. This error occurred only when a workflow was defined to change the order of the fields using the Req_MoveTo procedure.QCCR1J25236 - Selecting a large number of requirements in the Requirements Tree view took a longer time than selecting the same in Grid View.QCCR1J25028 - Generating a graph using the Graph Wizard showed data from all tests even though only one test was selected.QCCR1J24697 - Importing of baselines failed when the baselines contained deleted tests as part of their content.QCCR1J24631 - Baseline comparison failed for certain projects.QCCR1J25606 - Baseline synchronization between projects failed to complete.QCCR1J25532 - An error occurred when adding the same component twice to a business process test.QCCR1J24968 - Run iteration data was incorrectly generated for business process tests with a single iteration.QCCR1J26305 - An error occurred when several instances of components where added to a business process test.QCCR1J26517 - It was possible to create input and output flow parameters with duplicate names.QCCR1J24325 - Business process tests failed to run in some projects that were imported from an earlier path if the business components had some parameters defined.QCCR1J25490 - Copying a specific project from SQL2005 to SQL2008 or to Oracle 11 failed.QCCR1J26511 - Changes made to design steps in a test plan were not committed after the view is refreshed. For example, modifications made to a pasted design step were lost after a consecutive paste action.QCCR1J25752 - If a parameter had a value longer than 4000 characters, an error appeared upon switching to the Parameters tab in the Test Plan module.QCCR1J26213 - For tests having a large number of test instances, the Go to Test in Test Set action in the Test Plan module produced an error message and failed.QCCR1J26479 - Changes made to the test description were not kept when moving from the Details tab to the Steps tab in the Test Plan module. Note: This fix will be available in OTA in a future release.QCCR1J25845 - Inserting a new step to a test plan with a long list of steps did not keep the view focus on the newly-added step.QCCR1J25268 - The description field in the Test Details dialog box that is opened from the Manual Runner became modifiable after switching to the Comments tab.QCCR1J18710 - The Back to Caller Test button was missing from the view of a called test in the Test Plan module.QCCR1J24865 - An error was displayed after running a test set in the Test Lab module if that test set contained a test having a user-defined field of memo type.QCCR1J25368 - A test configuration parameter contained incorrect values in cases where another test instance had the same ID and parameter name. Note: Test configurations that had been added before this fix will still contain incorrect test parameter values. In such cases, delete and recreate the test configuration that has the incorrect test parameter values.QCCR1J25215 - A new design step added to a business process test was saved even though the Cancel button was eventually clicked.QCCR1J19919 - When multiple Automatic Runner windows were opened, closing the first window that was opened resulted in closure of all other windows.QCCR1J18938 - Test sets with around 30,000 test cases each failed to run.QCCR1J20975 - Empty folders were hidden when a sort was set in Test view or Test Set view and data hiding filter was set, even though these folders did not fall under the data hiding filter criteria.QCCR1J26083 - The result of running a test set that consisted of different configurations of the same VAPI XP was not saved properly.QCCR1J24157 - Applying favorites\filters in the Test Lab module did not show the expected result. Also, the layout of the Execution Grid was not refreshed according to the applied favorite\filter.QCCR1J26492 - The view of the Execution Settings tab of a test instance that was created from a business process test having hundreds of parameters took along very long time.QCCR1J26010 - Error messages were displayed incorrectly after canceling the execution of the Manual Runner for tests defined with required fields.QCCR1J25966 - A significant delay was experienced when re-ordering items in the Execution Flow tab in the Test Lab module.QCCR1J23848 - An error was displayed when a user attempted to add a host to a host group after that host was renamed.QCCR1J23848 - Group permission for adding/removing hosts from host groups was missing.QCCR1J25270 - A Test Runs linked to a defect could not be displayed when the associated defect in the Test Runs view was located after the first 500 records of the Test Runs view.QCCR1J25285 - The date notation in the automatically generated name of a Fast Run (i.e. directly modifying the Test Run status field) was wrong.QCCR1J22280 - In case of a Fast Run, the Tester field was not automatically updated to the current user name.QCCR1J27200 - Two executable files were unnecessarily downloaded when QuickTest Professional connected to ALM for the first time.QCCR1J25553 - Two Automatic Runners could not simultaneously run test sets from a single test host.QCCR1J25474 - An error message was occasionally displayed when a user set a data-hiding filter on a test set or test and expanded a folder with more than 30 subfolders.QCCR1J26005 - Default sort of Runs list in test instance details was from oldest test to the latest. Now the default sort shows the latest run on top.QCCR1J26553 - The Designer field in the New Test dialog box did show the correct letter case of the user name.QCCR1J26324 - When copying a test instance having parameters of the same name from different called tests, the values of the parameters were not copied properly.QCCR1J27054 - In version-controlled projects, check-in failed after removing all parameters of a test.QCCR1J25116 - The Subject field of a defect that was submitted from the Manual Runner was not automatically updated.QCCR1J26200 - In some cases, test configuration status was not updated with the latest status.QCCR1J25427 - Test Configuration values were not restored properly from baselines.QCCR1J25074 - The LoadRunner Controller could not find the service test scripts when saved on ALM.QCCR1J23512 - The ALI extension file was not added to the MSI package.QCCR1J25750 - System memory was not properly released in a specific utilization of the OTA API.QCCR1J25687 - "Invalid Command Line..." error when trying to launch Sprinter Results Viewer from ALM/QC inertface with user which ALM/QC user name contains spacesQCCR1J19376 - When creating a defect from a test run the Detected in Cycle field was not properly updated.QCCR1J18961 - The modification of a defect made by one user was not visible to a different user as the latter user tried to update the defect.QCCR1J15789 - The Subject field of a new defect was not updated automatically when that defect was created from the Manual Runner.QCCR1J26201 - The "Required Defect Fields" dialog window was not refreshed when additional fields became required after updating some of the required fields in the dialog window.QCCR1J24876 - In setting the visible columns of a grid view, columns that were moved from Visible Columns back to Available Columns were not positioned in alphabetical order.QCCR1J24937 - An exception occurred when attaching a file to a test folder with more than 1000 attached files.QCCR1J25663 - The Find option in filter selection trees always returned an empty result.QCCR1J19014 - The .NET Custom Test Type Developer Guide was missing from the documentation library.QCCR1J25635 - An open Help window was unintentionally closed when a Defect ID link was activated from the Alert dialog box.QCCR1J23028 - Filters of Quality Center 10.00 projects were not upgraded as favorites in ALM 11.00.QCCR1J25101 - <ALTGR> + # keyboard combination using a Finish language deployment changed the active page, just like the <CTRL>+ # keyboard combination.QCCR1J24734 - Uppercase Email addresses added to the Send E-mail dialog box produced an error.QCCR1J26494 - Incorrect embedding of a license caused an error to be thrown whenever the Thesaurus utility was accessed.QCCR1J22435 - When copying text into the memo field, the font size and font could not be modified in the Memo field.QCCR1J26659 - URL attachments with Danish characters could not be opened.QCCR1J20807 - Pasting a cell from Microsoft Excel into a rich text description failed and produced an error.QCCR1J24579 - The SQL statement used for session login did not bind literal values causing each individual statement to be parsed and cached individually. Now binding is used to consolidate many individual statements into a single structure.QCCR1J24794 - In some cases, comparing or synchronizing entities failed repeatedly.QCCR1J25146 - Attachment rename action was not invoked as expected after two consecutive clicks.QCCR1J25429 - OTA based application stopped working after consecutive runs on a multi-core Windows operating system.QCCR1J26855 - A dialog window requesting registration was displayed on running spell-checker.QCCR1J27929 - Spell Checker and Thesaurus utilities failed to run when invoked without leaving the edited field.QCCR1J25444 - The Run_MoveTo method returned an incorrect run ID.QCCR1J25659 - When a button was added through workflow, the Action Name field got shortened .QCCR1J25906 - A specific workflow intended to hide fields produced an error when executed.QCCR1J26022 - The Cancel All button in Required Field form reverted only the data changes. The cancel operation did not revert changes to the field properties that were made by a workflow.QCCR1J26234 - The VBScript Home Page link under the Help menu in the Workflow Script Editor window did not work.QCCR1J18725 - In upgraded projects, the GetDetailsPageName event was not triggered in all required scenarios.QCCR1J26932 - The workflow action SendMail used the wrong email address in the From field.QCCR1J23698 - Disabling the "Continue Manual Run" button from a workflow caused the ManualRunner.Run_MoveTo() subroutine to remain disabled.QCCR1J24602 - The Release_FieldChange and Cycle_FieldChangeRelease workflow subroutines were not triggered after rescheduling a Release or a Cycle.QCCR1J22723 - Users of the Viewer group were able to check in and check out entities.QCCR1J25609 - Entitles in projects using a binary collation database in SQL Server could not be checked out.QCCR1J25042 - Generating Excel reports via workflow could not be executed properly.QCCR1J26282 - An "Export Finished Successfully" message was displayed after the export of a project failed due to the fact that the project was undergoing migration at the same time.QCCR1J25748 - Export of a project that was created prior to SP3 failed due to missing column SRPF_GC_DETECTED_TIME. Now, prior to export, the missing column is added.QCCR1J26185 - Logging into an ALM running on Solaris server with more than 6GB heap size caused a FileNotFound Java exception.QCCR1J26552 - A unique constraint error was thrown while upgrading a project from Quality Center 9.20 to ALM 11.00.QCCR1J24889 - After a successful repair, upgrade fails due to problems in the RUNTIME_PARAM table.QCCR1J26499 - An exception occurred when upgrading from Quality Center 10.00 to ALM 11.00. The problem was related to the bp_iter_param table.QCCR1J26583 - Attachments added to a test plan folder remain locked after updating their description.QCCR1J24131 - The Attachment icon did not appear in Manual Runner steps.QCCR1J25926 - The Site Administration API method DisconnectUser did not disconnect the user and returned an error message.QCCR1J25904 - Users were not able to log into Site Administration if the language format was set to Ecuador.QCCR1J25745 - The Site Administrator could remove a project after a failed restore.QCCR1J23174 - The last digits of login time columns were hidden in the Site Connection grid.QCCR1J26510 - A user belonging to the Viewer group only could not browse the whole Description field text due to the scrollbar being locked.QCCR1J25977 - Non-administrator users could not start Site Administration when using ALM Explorer.QCCR1J19863 - The Site Analysis graph of license utilization showed inconsistent data between weekly and monthly reports.QCCR1J25808 - When deleting a project in Site Administration with a few web servers in Load Balance, the deleted project remained on the other servers in inactive state.QCCR1J27238 - Garbage Collection (GC) job of the smart repository did not update its last run indication if it could not connect to the project DB schema.QCCR1J24688 - When setting LDAP import processes, the error message relating to the record limit value was incorrect.QCCR1J24816 - When using Internet Explorer 7 to run ALM client, and closing Internet Explorer 7 using the Close Window button, Internet Explorer 7 becomes unresponsive.QCCR1J27394 - In specific cases, some database queries resulted in an overall blocking of the ALM database.QCCR1J25581 - New-line characters disappeared when defects were exported to Excel in projects upgraded from Quality Center 9.20.QCCR1J25075 - The Status field of a test instance in the Execution Grid could not be updated when working with ALM Explorer.QCCR1J22751 - When using ALM Explorer, the Reset Password link now properly triggers ALM Explorer to open rather than Microsoft Internet Explorer.QCCR1J25220 - Updating a user list field with an empty string did not nullify the field.QCCR1J20809 - The ability of changing the ALM logo with custom branding (customer's own logo) was not available.QCCR1J25834 - Default values for the same entity from two different modules where saved per module instead of having the default values shared across modules.QCCR1J24863 - Changing the LOCK_TIMEOUT site administration configuration parameter resulted in a poor performance when editing Memo fields.QCCR1J25380 - Renaming defect\defects strings in the Defect Module did not work properly.QCCR1J25757 - The Set Default Values option produced an error when performed for a field using a multi value lookup list.QCCR1J21921 - It was possible to modify Memo fields in the Defects module concurrently by different users, having one overriding the modifications of the other.QCCR1J25751 - Tabs for Memo fields were ordered by their database name rather than the user label.QCCR1J24225 - The New Test button in the Test Plan module screen remained enabled when the Unattached folder was selected.QCCR1J26558 - The Replace function inside Memo type fields did not work properly.QCCR1J24845 - The Filter dialog box for a test set did not provide the pre-defined values for the Planned Host Name field.QCCR1J26258 - In Customization's Project Users grid, you could search for users only by user name. Now you can click the Full Name column, and type a full name. The first user whose full name matches what was typed is located.QCCR1J26828 - In some specific cases an error message was displayed when switching between modules and entities in Customization mode.Change Request: QCCR1J23893 Problem: When a test configuration on a version-controlled project has Passed status test coverage, the status remains Not completed Limitation: QCCR1J24642: Fix does not work for projects that are already corrupted.Change Request: QCCR1J23027 Problem: In the Requirements module for ALM 11 Patch 6, the coverage analysis shows false results for test configuration results.Change Request: QCCR1J24699 Problem: Copy to Clipboard in the Coverage Analysis dialog box is missing content. Solution: The problem is fixedChange Request: QCCR1J23545 Problem: A Failed to Get Coverage error is displayed when trying to access test coverage using the Status filters and when the test coverage has a coverage status of N/A.Change Request: QCCR1J23885 Problem: The Modified (RQ_VTS) field is not displayed in the Requirement Detail page.Change Request: QCQR1J23310 Problem: Only the last child requirements test configuration is displayed when its parent requirement is selected in Full Coverage Mode.Change Request: QCCR1J22861 Problem: The confirmation message is hidden behind the Update Selected progress bar if updating a requirement with children. Change Request: QCCR1J23530 Problem: After deleting a trace from or trace to requirement, if the row was not entirely selected when adding new one, the error Index was out of range.... is displayed all the time for the same operation.Change Request: QCCR1J25084 Problem: You should not be able to add the Req: Rich Text column in the Traceability/ Relationships tab. The Req: Rich Text column in no longer available in the Select Columns dialog of the Traceability/ Relationships tab. If this column was previously added in a project with Service Pack 3 that was later updated to patch 9, the column stays in the grid but is not available in the Select Columns dialog box. Moreover, it disis displayed from the grid the next time the user opens the Select Columns dialog box and clicks OK. Limitation: When the column is still visible in the grid, the user is not able to see images in this field.Change Request: QCCR1J23703 Problem: Single and double quotes in a requirements rich text area convert to scrambled characters when upgraded from Quality Center 10.00 to ALM 11.00. Limitation: This solution fixes future rich text conversions. To fix already-converted rich text, a rollback is needed.Change Request: QCCR1J25105, QCCR1J24821 Problem: The quick search for subfolders in Requirements tree does not work. Limitation: This solution fixes future rich text conversions. To fix already-converted rich text, a rollback is needed.Change Request: [internal]190976 Problem: Only the last child requirement's test configuration displayed when a parent requirement is selected in Full Coverage mode.Change Request: QCCR1J23672 Problem: When using data-hiding for a group and the Defect Field Customization, the error Invalid field Name isthrown.Change Request: QCCR1J18662 Problem: Tests with parameters exported from Microsoft Excel are corrupted and subsequent use of this test causes issues.Change Request: QCCR1J24463 Problem: User sets up filter to find a defect and adds comments by clicking the Add Comment button. When the add is completed, user clear the filtering and all modifications appear to be lost. Limitation: This fix is applicable only to the Defects module.Change Request: QCCR1J24951 Problem: An exception is displayed when resizing columns in an empty Defects module grid, and then logging out and logging in. Limitation: This fix is applicable only to the Defects module. Test PlanChange Request: QCCR1J23734 Problem: The following error is displayed in the Test Script Tab in the Test Plan module: Error while updating views Retrieving the COM class factory for component with CLSID {63A6D15C-7DBC-4EB6-89F8-5DEB99D24C6B} failed due to the following error 80131522.Change Request: QCCR1J22349 Problem: When performing a replace operation in Descriptions fields in the Test Plan module, formatting is erased and the text is displayed as plain text.Change Request: QCCR1J23846 Problem: The scroll bar on Select Output Parameter dialog box is not displayed properly and does not work properly.Change Request: QCCR1J20811 Problem: Exporting Test Plan grid data to Excel after applying a filter fails with the error Not enough storage is available to complete this operation.Change Request: QCCR1J24316 Problem: The 'Insert Parameter' button is incorrectly enabled for 'Call to Test' design steps.Change Request: QCCR1J23810 Problem: Hotkey selection (the ability to select by typing in the first letters) is not functional in the Test Plan module.Change Request: QCCR1J23246 Problem: When test steps are copied from one test and pasted into another, control buttons (such as edit, renumber, delete test step) are not enabled.Change Request: QCCR1J20241 Problem: The Cannot display test. Make sure the test exists in the database error is displayed when opening the Test Script tab, and you cannot open tests from QuickTest Professional in some projects.Change Request: QCCR1J24812 Problem: A parameter`s Default/Actual values are not substituted in the steps when using Manual Runner if the parameter name contains spaces. Limitation: Only single spaces are fixed only. Parameter names with multiple spaces are still problematic.Change Request: QCCR1J20179 Problem: An access violation occurs while running or viewing corrupted tests in Quality Center/ALM. Solution: Informative message with details on how to solve the problem is shown whenever such a test is viewed or run.Change Request: QCCR1J23542 Problem: Deleting a versioned test may cause data corruption.Change Request: QCCR1J23645 Problem: Errors item does not exist and Controllers of data type handle only one type of entity per instance are displayed all the time while creating new tests after deleting an already-run test that contains linked tests.Change Request: QCQR1J24646 Problem: The ALT + N shortcuts in the Parameters and Design Steps tabs do not behave as expected.Change Request: QCQR1J24384 Problem: Requirement is locked for the user that has checked the entity out.Change Request: QCCR1J24282 Problem: LoadRunner scenarios fail to run from ALM11.Change Request: QCQR1J23442 Problem: Unnecessary folders are displayed in the Select Test tree in the Execution Grid when applying a cross-filter.Change Request: QCQR1J17857 Problem: The Object reference not set to an instance of an object error message is displayed when clicking the Runs button in the Test Instance Details dialog box opened from the Live Analysis Drill Down analysis window.Change Request: QCCR1J21464 Problem: The Automatic Runner does not switch to other hosts in a host group when the current tested host is busy with another test.Change Request: QCCR1J23540 Problem: The Unspecified error error message is displayed when running business process test whose name exceeds 180 chars.Change Request: QCCR1J23627 Problem: The Failed to PasteData error message is displayed when copying a test set after deleting a test configuration in a version-controlled project.Change Request: QCCR1J24683 Problem: Test runs are not copied during a copy existing project operation, if all checkboxes are checked.Change Request: QCCR1J23616 Problem: The test instance order is incorrect when Order by Name is used and the backend is Oracle.Change Request: 190980 Problem: Clicking on a grouping row in the test grid throws an exception.Change Request: QCCR1J21100 Problem: User-defined field for test sets do not have support for Multiple Value.Change Request: QCCR1J18751 Problem: Users cannot log in when the Format and Input Language regional settings are different. by the vendor.Change Request: QCCR1J23341 Problem: When logging in to project upgraded from Quality Center 10.00, not all lists are visible.Change Request: QCQR1J23158, QCCR1J24673 Problem: ALM fails to load the login screen when using reverse proxy with form authentication.Change Request: QCQR1J24117 Problem: Spell-checking Comments fields does not advance the user to the next misspelled word.Change Request: QCCR1J25195 Problem: a Thesaurus.Model Error is displayed when users click the Thesaurus button.Change Request: QCCR1J22427 Problem: Users needed the OTA API to convert filter XML to filter text, in order to be able to use favorite's filter, which is saved in an XML format. by adding a new API: IFavoriteFactory2.Convert. This method gets a filter in an XML format, and converts it to filter text format, usable an ordinary OTA API. Limitation: OTA API should be consumed by running the HP ALM Client registration add-in. The API is not available in isolated mode.Change Request: QCCR1J23882 Problem: Image scaling is corrupted after rich text conversion from Quality Center 10.00 to ALM 11.00.Change Request: QCCR1J24871 Problem: Database connection starvation occurs when CProjectCacheCleanerJob is run on environments with hundreds of projects. Solution: The problem is solved.Change Request: QCCR1J22554 Problem: Unable to deploy the ALM 11.00 Client on some machines with Internet Exporer 7 or 8 when the connection to server requires SSL. Solution: The problem is solved.Change Request: QCCR1J22900 Problem: Special characters (such as left and right arrows) inputted in the Description field are not displayed correctly.Change Request: QCCR1J23998 Problem: User name casing based on Login screen spelling and not on the Users table causes issues in ALM 11.00.Change Request: QCCR1J24598 Problem: Objects remain locked after the LOCK_TIMEOUT is expired when the Quality Center client session is ended by inactivity after the WAIT_BEFORE_DISCONNECT time has passed. Any locks that exist before this fix is applied should be manually deleted from the databases.Change Request: QCCR1J23844 Problem: When a user is deleted, all public Favorites created by the user are removed.Change Request: QCCR1J23675 Problem: It may take some time to display error messages.Change Request: [internal]186838 Problem: Renaming a favorite to an existing favorites name does not behave as expected. Solution: Roll back the favorite name if the rename did not complete.Change Request: QCCR1J24820 Problem: The JDBC driver getting table metadata is inefficient in the Oracle database. Solution: The problem is fixedChange Request: [internal]188172 Problem: Using Field Replacement functionality does not work correctly.Change Request: [internal]188188 Problem: Field Replacement form should not load the old value when the field type is a memo field.Change Request: [internal]190982 Problem: Field Replacement functionality reports the wrong number of replaced instances.Change Request: QCCR1J23544 Problem: Too many database queries are sent frequently when empty domains exist.Change Request: QCCR1J24579 Problem: DB shared pool has a lot of queries of the type: UPDATE LOGIN_SESSIONS SET LS_LAST_ACTION_TIME=(select SYSDATE + (-6602446/(24*60*60*1000)) from dual) , LS_LAST_TOUCH_TIME=(select SYSDATE from dual) WHERE LS_ID = :v0 Solution: The query now uses a bind parameter, and there should be one per project in the database shared pool.Change Request: QCCR1J24194, QCCR1J24091 Problem: Sometimes the ALM Server hangs when the PC extension is installed.Change Request: QCCR1J17300 Problem: Incorrect casting manual input (including empty string) to date format. Solution: Set correct parsing manual input (including empty string) to date format.Change Request: [internal]189597 Problem: Permitting the creation or update of folder entities in the Groups and Permissions category requires permissions for creating or updating contained entities.Change Request: QCCR1J18526 Problem: Each letter typed causes the addition of extras space when entering comments using the Korean keyboard.Change Request: QCCR1J25145 Problem: Prevent loading of customization during connect and disconnect from a project for the internal system user.Change Request: QCCR1J24527 Problem: The ALM Server crashed due to a request for all run steps. Requests are prevented from trying to get all run steps by introducing a fuse.Change Request: QCCR1J15251 Problem: It is impossible to open a QuickTest test in QuickTest Professional on Windows 7 64-bit. An error is displayed while saving the test to ALM (QuickTest Professional 10.00 and ALM 11.00).Change Request: QCCR1J24166 Problem: Populating a database tables metadata is slow and the process takes a lot of space in the database shared pool. Solution: The query was optimized. Database shared pool space was freed.Change Request: [internal]189184 Problem: In some cases, the Rich Text combo box does not show the correct font type.Change Request: QCCR1J24496 Problem: Authentication error occurs when accessing QC Sense configuration in Site Administration when the Site Administrator user name contains two words.Change Request: QCCR1J23739 Problem: Sessions are incorrectly calculated when QC Sense is used. Solution: The problem is fixedChange Request: QCCR1J23431 Problem: The copy/paste of business process test performance can be improved by reducing an obsolete calculation during the copy/paste. Limitation: Performance improvement is not very significant unless the copy/paste includes business process test and components.Change Request: QCCR1J23857 Problem: Test configurations are not reflected in baselines. for static configurations. Limitation: This fix only deals with static configurations, not dynamic.Change Request: QCCR1J24815 Problem: Failed to generate a test Instance XML error when running business process tests after Patch 6 for ALM 11.00. Solution: The original problem is fixed.Change Request: QCCR1J24114 Problem: Screenshots in the Results Viewer are rewritten by the next business component run. Solution: fixedChange Request: [internal] 184503 Problem: Double-clicking a business component or library does not trigger the workflow event.Change Request: [internal]186222 Problem: The Delete step button is enabled and the user can delete a step in keyword-driven automation. Solution: Permissions were added.Change Request: QCCR1J23700 Problem: The Component Details dialog box opens incorrectly.Change Request: QCCR1J22820 Problem: The Add Comment Button should be disabled, but is enabled until the next login to the Business Components module.Change Request: QCCR1J23990 Problem: Business process tests or flows are not running in Wrapper Test mode if the test contains a component with an empty value type.Change Request: QCCR1J23786 Problem: Upgrade fails when upgrading project from Quality Center 9.2 to ALM 11.00 if multiple extensions are enabled.Change Request: QCCR1J24223 Problem: Modifying a license takes 8-12 hours.Change Request: QCCR1J23747 Problem: The MAX_DRILLDOWN_ENTITIES site parameter can be set to a negative value, in which case the drill down does not work. In case a negative value is set, the default (35,000) is used.Change Request: [internal]184970 Problem: Verification of some projects upgraded from Quality Center 10.00 to ALM 11.00 may fail.Change Request: QCCR1J24104 Problem: A runtime error is displayed when using the RunQuery and TestConnection methods of the SiteAdmin API.Change Request: QCCR1J23911 Problem: A runtime error is displayed when using the RunQuery and TestConnection methods of the SiteAdmin API.Change Request: QCCR1J17097 Problem: It is impossible to hide some actions in Releases, Libraries, and other modules via workflow.Change Request: QCCR1J23350 Problem: Workflow fails to access the ActPassSelected action when running business process test in the Manual Runner.Change Request: QCCR1J24476, QCCR1J24477 Problem: Defect_Bug_MoveTo and Bug_MoveTo actions are not called when focusing on a defect in dashboard drill down view.Change Request: QCCR1J15124 Problem: Action RenameAct is not triggered when renaming a folder by double click, but it is triggered when renaming by F2 or context menu. Limitation: Single click is handled by MouseUp event inside EntityTree and does not trigger the workflow event.Change Request: [internal]185176 Problem: The workflow event Req_New is triggered when creating a requirement folder.Change Request: [internal]186042 Problem: The workflow event ActionCanExecute is not called when clicking on the toolbar buttons _Generate_, Query Builder etc.Change Request: [internal]103612 Problem: Test execution status is not refreshed in workflow.Change Request: QCCR1J23376 Problem: Actions to Block Requirements to Traceability does not work as expected. Solution: Added two new events, Req_CanAddReqTraces and Req_CanDeleteReqTrace. These events can be used to query the requirements about version control. Limitation: Event Req_CanAddReqTraces is not fired when creating a new trace with By ID (Trace From) or By ID (Trace To) dropdown menu items.Change Request: QCCR1J23373 Problem: Field attributes values set by workflow may be lost when switching between views in the Requirements Module.Change Request: [internal]185134 Problem: When moving between two test parameters, the MoveTo workflow event occurs twice.Change Request: [internal]185056 Problem: Some of the old format test lab tree workflow events are not thrown (such as AddTSinTreeAct, DeleteInTreeAct, etc.)Change Request: [internal]185457 Problem: ActionCanExecute workflow event does not work on customized buttons in the New Defect dialog box from an external tool such as Sprinter.Change Request: QCCR1J23467 Problem: The Document Generator shows HTML tags in RichText fields for requirements when the RichText field value is blank.Change Request: QCCR1J24304 Problem: When creating a graph with a user-defined field of type multi value in the x-axis, the graph result is empty with warnings.Change Request: [internal]190977 Problem: When generating graphs in a Dashboard page or Live Analysis, initial graph size is small and is updated only after all graph are generated.Change Request: QCCR1J23940 Problem: Splitter on Quality and Progress tabs is not movable for Cycles and Releases.Change Request: QCCR1J25557 Problem: Excel hangs when exporting a test case with the same parent and child folder names.Change Request: QCCR1J20254 Problem: Memory leak on login and logout operations when using OTA scripts.Change Request: QCCR1J23890 Problem: Sometimes the JDBC driver throws an exception.Change Request: QCCR1J23398 Problem: Sometimes ALM Explorer takes more than 30 seconds to close after clicking the x button.Change Request: QCCR1J24300 Problem: The Failed to compare entities error is displayed when comparing baselines on some projects.Change Request: QCCR1J25790 Problem: ALM uses an older version of Microsoft Visual C++ 2005 than the QuickTest Professional Plug-in. Apply the QuickTest Professional plug-in hotfix QTPQC_00012.Change Request: QCCR1J24614 Problem: It is impossible to consume Quality Center in common mode for a non-administrator user using the function DownloadComponents. An error is displayed that there are insufficient permissions. This happens even though Quality Center was already deployed in common mode by an administrator.Change Request: QCCR1J24609 Problem: Sprinter cannot connect to ALM 11 Starter Edition.Change Request: [internal] 94960 Problem: Sprinter cannot upload resources in the ALM Resources module when the resources contain required user-defined fields.Change Request: [internal]188951 Problem: When creating an attachment over REST API, if the attachment name contains the character '/', the server freezes.Change Request: QCCR1J23787 Problem: Some projects with BPTEE, CIT, APM, and EI extensions are enabled cannot be upgraded from Quality Center 9.2 to ALM 11.00. Solution: Instructions for how to upgrade those projects are provided.Change Request: QCCR1J21450 Problem: ALM 11 SP2: Test Plan > Test > Design Step tab: The column size is not retained.Change Request: QCCR1J22062 Problem: Called Test Parameters is yielding a No Parameters Found error message.Change Request: QCCR1J23116 Problem: The Test Configurations tab does not display a green content indicator in Test Plan.Change Request: QCCR1J22744 Problem: When test cases are exported from excel to ALM, an error message in design steps is displayed on IE7 and on ALM explorer (where IE 7 is installed).Change Request: 179315 [Internal] Problem: Cannot view design step UDF fields even after selecting them in the columns selection.Change Request: 178680 [Internal] Problem: Test Parameters Actual Value disappears after a refresh.Change Request: 180101 [Internal] Problem: Missing shortcut key (Alt-N) for new test operation.Change Request: 179972 [Internal] Problem: Changing the coverage mode of a requirement from Selected to All does not automatically refresh the Test Configuration tab.Change Request: QCCR1J22884 Problem: The user is able to delete ALL test configurations in a VC project.Change Request: 178706 [Internal] Problem: A step is posted to the server immediately when changing a step field (before moving to another step).Change Request: 180112 [Internal] Problem: The error message Index was out of range. Must be non-negative and less than the size of the collection. is displayed when going to a called test case in another test folder which is not in the Filter.Change Request: 182277 [Internal] Problem: The Delete Step action cannot be disabled with the Workflow when first opening a test/step.Change Request: 178887 [Internal] Problem: The Workflow does not affect the Design Step.Change Request: 179981 [Internal] Problem: Internal fields are displayed in the Test Plan Grid. Defect ID: 180329 [Internal] Problem: The error message Duplicate entity test is misleading. An error message like Test with name ... already exists in the folder is more user-friendly.Change Request: 180456 [Internal] Problem: In the second level folder under the root folder, when the root folder is selected, the cut and paste actions do not work with the hot keys or the Cut and Paste buttons.Change Request: 182926 [Internal] Problem: After removing the last Test Configuration, the Remove Selected button is still enabled.Change Request: 180302 [Internal] Problem: Design steps that have been deleted from Manual Runner still appear in Test Plan.Change Request: QCCR1J21997 Problem: The Insert Parameter option is disabled when right-clicking the Design Steps.Change Request: 89936 [Internal] Problem: The error message that appears when text search is disabled is different from the one that appeared in QC 10.00.Change Request: 178478 [Internal] Problem: Generate script causes error - Users do not have the required permissions to execute this action.Change Request: 179567 [Internal] Problem: The value cannot be NULL. An error message appears when focusing on a test that has been changed.Change Request: 185265 [Internal] Problem: Unable to delete Test Configurations due to a non-functional Delete button.Change Request: 179119 [Internal] Problem: When copying test steps to another test, the following buttons remain disabled: Test name, Edit test, Renumbering steps, and Delete steps.Change Request: 180085 [Internal] Problem: The Parallel Execution feature for Automatic Runner is not disabled.Change Request: 178910 [Internal] Problem: When the template test is not part of the filter and you click the call to test link, an error message appears.Change Request: 179984 [Internal] Problem: Erasing text from a required field in the Test Set Details tab causes an Object Reference error.Change Request: 178865 [Internal] Problem: There is no automatic refresh when you delete a test instance in the execution grid.Change Request: QCCR1J20569 Problem: Activating Call To Test from Design Steps for a test redirects the user to the called test - a green arrow in the top left corner that returns the user to the initial test should be present.Change Request: 87705 [Internal] Problem: Requirements coverage performance is slow, especially Select Configurations.Change Request: 92397 [Internal] Problem: It is impossible to move over tests Data table in the Test script tab using the keyword keys up, down, left, and right.Change Request: 94721 [Internal] Problem: There is a missing capability (from QC10.00) to delete a step from the design step editor.Change Request: 103637 [Internal] Problem: When focusing on an unattached folder in Test Plan, you get a Failed to Get Test Value error message.Change Request: 103736 [Internal] Problem: Test Plan grid view - when entering into a grid view, an object reference error message appears. Change Request: 179020 [Internal] Problem: When adding the parameter in the parameters tab message, the scroll jumps in the lower pane.Change Request: 179065 [Internal] Problem: When trying to add a step after deleting the other steps without refreshing, the error message Index was out of range ...appears. Change Request: 179088 [Internal] Problem: An object reference error message appears when focusing on a test and clicking the CTRL button on the keyboard.Change Request: 179186 [Internal] Problem: Folders are pasted without descriptions.Change Request: 179251 [Internal] Problem: An Object Reference error message appears when trying to find empty field values in the Case Sensitive Find Option.Change Request: 179287 [Internal] Problem: Right to Left - Decrease Indent does not work properly when using the Right to Left option.Change Request: 179498 [Internal] Problem: Splitter dots are cut in the Test Configuration View.Change Request: 179533 [Internal] Problem: Index was out of range... error message appears after creating the second step in Test Details ? Design Steps.Change Request: 180075 [Internal] Problem: Permissions - When disabling update description you are able to insert text, but when focusing on another field, an error message appears saying that you do not have permission to modify.Change Request: 180079 [Internal] Problem: Permissions UI Issue - When disabling update description you are able to insert text, but in the Edit step the screen becomes black.Change Request: 180086 [Internal] Problem: Permissions - Delete button is enabled although it should be disabled.Change Request: 180314 [Internal] Problem: Data hiding - When defining just one field for the Test Plan columns and then logging in/out from ALM, an Object Reference error message appears.Change Request: 180315 [Internal] Problem: Failed to get a value when going to a test in the test plan tree.Change Request: 180336 [Internal] Problem: The test configuration opens while clicking on the arrow in the scrollbar.Change Request: 180384 [Internal] Problem: Failed to get simple entity when trying to filter value by <= / >= for UDF.Change Request: 182282 [Internal] Problem: Only TD Admin group members can view Test Plan/Lab.Change Request: 183244 [Internal] Problem: The Test Script Tab does not show Test flow (without versioning).Change Request: 183255 [Internal] Problem: When refreshing the Test Plan screen, hidden fields are visible after check-in or check-out. SP2 (CPE Incident: 20677/)Change Request: 183418 [Internal] Problem: [Default Values] There is a type cast error in the Test Configuration dialog box.Change Request: QCCR1J22816 Problem: Compact Manual runner incorrectly warns testers that changes cannot be made to a called test.Change Request: QCCR1J22634 Problem: There are too many unrelated entries related to test lab in the audit log tables in the database.Change Request: QCCR1J22615 Problem: When copying a Test Set after deleting a Test Configuration, the error message Failed to Paste Data is displayed. for non Versioned projects only. Limitation: [QCCR1J23627]: When copying a Test Set after deleting a Test Configuration in a VC project, the error message Failed to Paste Data is displayed.Change Request: 178851 [Internal] Problem: Reset test set does not automatic refresh.Change Request: QCCR1J22587 Problem: There are conflicting expected behavior-prompts regarding test parameters.Change Request: 179621 [Internal] Problem: Ordered test instances in the execution flow create an unnecessary dependency between test instances.Change Request: QCCR1J22482 Problem: Doing a fast run in the execution grid of a test needs a refresh before viewing the information in the Test Instance Details dialog box.Change Request: 180107 [Internal] Problem: Host Manager - When a user creates a host group, which name is (the symbol) , an incorrect error message appears: Failed to post simple key entity instead of an error message or a warning with the appropriate message.Change Request: 180295 [Internal] Problem: Host Manager When a user renames a host in the Host Manager to a name that already exists, the host is renamed and the message Failed to Post Simple Key Entity appears.Change Request: 178957 [Internal] Problem: After clicking Continue Manual runner on a BPT test that was not run, the error message Object Reference not set to an instance of an object appears in the execution grid.Change Request: 179626 [Internal] Problem: Disabling the Delete button, while selecting a couple of test instances with Ctrl and Left Mouse Click, did not work. It stayed active.Change Request: 179443 [Internal] Problem: While attaching to step to a required field in Manual Runner, an error message collection was modified; enumeration operation may not execute appears.Change Request: 184635 [Internal] Problem: Disabling the Delete button, while selecting a couple of test instances with Ctrl and Left Mouse Click while the filter is selected in execution grid, did not work. It stayed active.Change Request: 179135 [Internal] Problem: Users cannot delete Host Group (button is disabled) when there is an empty tab of hosts (or when they are not focusing on hosts) in Host Manager.Change Request: 180213 [Internal] Problem: While doing go to test set and open details options, the content of the error message does not display user friendly information.Change Request: 179631 [Internal] Problem: When you run test instances that are deleted from the test set details and then try adding a new step, the error message Failed to Post Run appears. Solution: A warning message appears saying No runs exist, cannot continue.Change Request: 180351 [Internal] Problem: [Refresh] There is no automatic refresh when going to the test runs tab, however, if the test instance is deleted and no run for the deleted test instance is present, the details button on the existing run causes an error message: Item of type <TESTCYCL>, with Id <XXX> does not exist to be displayed. Solution: Automatic refresh has been added and updated to be the same as the error message indicated. Change Request: 179606 [Internal] Problem: Execution Grid - ALM client is stuck with a Failed to Post message when the user who is trying to continue already deleted the test run. Solution: We have added a message box with the correct message and the ability to close the manual runner.Change Request: 180308 [Internal] Problem: The list of statuses is cut in the Test Runs tab and everywhere else where it is visible. Solution: Scroll arrows were added. Change Request: 179664 [Internal] Problem: It is impossible to cut and paste folders directly under the Root folder.Change Request: 178706 [Internal] Problem: Manual Runner - Performance - Step is posted to server immediately after changing a step field (before moving to another step).Change Request: 178765 [Internal] Problem: Fast Run does not display the Last Run report without refreshing in Test Lab Execution grid. Change Request: 178865 [Internal] Problem: Execution Flow - There is no automatic refresh when you delete a test instance in the execution grid. When doing an execution flow, automatic refresh does not happen like in QC 10.00. Change Request: 178966 [Internal] Problem: Execution Grid - Tests under specific folders in the test plan filter from Test Lab cannot be found. Change Request: 179030 [Internal] Problem: Execution Grid - Filter test by name from the Test Plan Tree Tab from the Execution grid does not work for all test types. Change Request: 179341 [Internal] Problem: Manual Runner: Test Lab - Manual Runner is stuck while running test sets and updating tests upon exit. Change Request: 179984 [Internal] Problem: Test Set Details tab - when erasing text from a required field, an Object Reference error message appears. Change Request: 180012 [Internal] Problem: Selected columns are not saved in Test instance details - run tab. Change Request: 180014 [Internal] Problem: When you select ts2 test set, you always get the error message the key was already present in the dictionary, and then get a red X. Change Request: 180024 [Internal] Problem: An Object Reference exception appears (and then process needs to be killed) when refreshing in Runs View. Change Request: 180311 [Internal] Problem: There is an error message item of type test with id does not exist, when you delete a test in Test Plan and try to run it in Test Lab. Change Request: 180456 [Internal] Problem: Cut-paste of second child folder to root folder does not work with hot keys or the buttons Cut - paste, however, by moving the mouse and dragging it, it works fine.Change Request: 181101 [Internal] Problem: When running test instances that were deleted from Test Set Details, and then trying to add new steps, the Failed to Post Run error message appears. Defect ID: 183184 [Internal] Problem: Step_FieldCanChange is not triggered when pressing pass/fail buttons from a manual runner compact view.Change Request: 183480 [Internal] Problem: Host Manager - When you rename a host in the Host Manager to a name that already exists in a group, the host is renamed in the list but not in the group.Change Request: 184767 [Internal] Problem: A user with a QA Tester role can only select the first defect in the Linked Defects tab of a Test Set. Defect ID: 185791 [Internal] Problem: An exception appears in the root folder when the user tries to open raw or session results from Analysis. Defect ID: QCCR1J23131 Problem: Error accessing newly created project with the following conditions: The project was created in ALM 11.00 SP2 or later, and then used in an ALM 11.00 patch which is prior to SP2.Change Request: QCCR1J22523 Problem: After moving to smart repositories, attachments are not recorded in the audit_log table.Change Request: 97814 [Internal] Problem: Wrong order in the tool bar on a version project.Change Request: QCCR1J20332 Problem: The Find function is not working as expected with the Case Sensitive option.Change Request: QCCR1J20124 Problem: Value to Find disappears when switching between find in folder and find in subtypeChange Request: QCCR1J21957 Problem: If a field begins with two or more equal-signs, an Excel Export error message is displayed.Change Request: QCCR1J22938 Problem: If you do not enter the recipients email address, the email composed is lost after an error message.Change Request: QCCR1J20278 Problem: Cannot move Favorites between Private and Public folders. Limitation: Delete by owner is not implemented.Change Request: QCCR1J21225 Problem: In ALM 11.00, the memo fields Requirement Description and Requirement Comments do not display their own windows when moving the mouse over the fields.Change Request: QCCR1J22290 Problem: Selecting multiple releases in RQ_TARGET_REL and setting the sort order based on this field causes errors.Change Request: QCCR1J22704 Problem: Errors appears in the UI after Move to Bottom when the Requirement Traceability tab is selected.Change Request: QCCR1J22355 Problem: Generating a traceability matrix with Office 2007 German, France, Russian UI results in errors.Change Request: 85295 [Internal] Problem: Rich Content: The bullets should have the same color as the text.Change Request: 90281 [Internal] Problem: The cells size is not saved after saving it in the Rich Text tab when the cell contains long text.Change Request: 182991 [Internal] Problem: Rich Text: The column in the table cannot be cut and pasted. Cut cells do not disappear.Change Request: 183095 [Internal] Problem: The Replace functionality in the Rich Text does not replace correctly when replacing a single character.Change Request: 183767 [Internal] Problem: An error message appears when data-hiding is defined for Requirements.Change Request: 184142 [Internal] Problem: Pop up messages in cases of SQL failure do not display failed SQLs.Change Request: 184682 [Internal] Problem: Upgrading test configuration crashes.Change Request: 184047 [Internal] Problem: The verify tool crashes in one of its verifications.Change Request: 184589 [Internal] Problem: Upgrading BPT components crashes.Change Request: 184905 [Internal] Problem: Verification of ORACLE schema elements ownership is wrong.Change Request: QCCR1J22620 Problem: Module Access is not consistent when upgrading projects.Change Request: QCCR1J22954 Problem: After upgrading from QC 10.00 to ALM 11.00, the test plan is empty.Change Request: QCCR1J22290 Problem: The QC 10.00 server is reaching max heap memory size and not releasing it. This causes the application to crash several times a week.Change Request: 186443/ QCCR1J20179 Problem: Access Violation during Test Case Execution.Change Request: QCCR1J22138 Problem: When a BPT Report does not contain Component Details when running with a Wrapper Test, the following error message is displayed: ERROR: BPExecAgent.AddStepsForWrapperTestRun raised OLE error 8004051BChange Request: QCCR1J22237 Problem: There are some problems with the TEST_CRITERIA_IX2 index in Oracle after upgrading a project to ALM 11.00.Change Request: QCCR1J22643 Problem: Sharing: after importing a library, which consists of BPT and Flow tests, some of Flow tests are empty.Change Request: 18535/QCCR1J22360 Problem: After upgrading to ALM 11.00, the component input parameters that were defined as Boolean cannot be executed. Note: In ALM 11.00, Business Component parameters can no longer be defined with types. We added a support for backward compatibility so parameters that were defined as Boolean/Number in QC10.00 will be able to run. Limitation: A number parameter has an upper limit of 32767.Change Request: 186574 /QCCR1J23542 Problem: ALM 11 SP2: Versioning - deleting a versioned test may cause data corruption.Change Request: 185941 [Internal] Problem: Copy-Paste of a test folder containing Business Process Tests and Flows, where the Flow ID is smaller than the Business Process Test ID, might cause the Flow to be corrupt.Change Request: 184226 [Internal] Problem: It is possible to create a Flow input parameter with the same name as an existing Flow output parameter. Change Request: 180666 [Internal] Problem: You cannot run a Business Process Test in debug mode if it contains the same Flow twice, and this Flow contains a group.Change Request: 181252 [Internal] Problem: Iteration dialog box: Iterations are deleted if you close the confirmation message by clicking Close.Change Request: 181341 [Internal] Problem: In the Convert To Component dialog box, the Go to Entity ID button in the Select Destination Folder dialog box is redundant. Solution: The button was removed.Change Request: 180061 [Internal] Problem: When selecting a field of a requested component and trying to drag it out to a regular folder, an error message is displayed.Change Request: 181359 [Internal] Problem: By using Go to component on an obsolete Business Component, it is possible to edit the component.Change Request: 181337 [Internal] Problem: When clicking on Find Text in the Component Steps tab in Business Components module, the error message Object reference not set to an instance of an object is displayed.Change Request: 94377 [Internal] Problem: Group name is reset to default name (e.g. Group1) after a Copy-Paste operation.Change Request: 179529 [Internal] Problem: Business Process Test instance configuration changes from Modified to Configuration Based in some cases.Change Request: 181347 [Internal] Problem: Output parameter asterisk does not appear after promoting a Business Component parameter to a Flow level.Change Request: 183088 [Internal] Problem: Ordinal numbers of manual steps are cut if they exceed 99 steps ( > 2 digits).Change Request: 179639 [Internal] Problem: An error message appears if you focus on an iteration value in the Iterations dialog box and close it using the X button.Change Request: 183573 [Internal] Problem: Backward compatible workflow subroutines are not triggered in the Sprinters New Defect dialog box (for example Defects_GetNewBugPageName).Change Request: 183574 [Internal] Problem: The workflow function CanLogin is triggered in Sprinter.Change Request: 183572 [Internal] Problem: Using ActiveModule in workflow subroutines results in an error when triggered from Sprinter.Change Request: 184337 [Internal] Problem: Actions in the Details dialog box cannot be disabled from the workflow subroutine dialog box.Change Request: 92218 [Internal] Problem: Setting Visible property to false from workflow subroutines does not affect the field visibility in the manual runner compact view.Change Request: 179395 [Internal] Problem: The workflow function GetDetailsPageName is not triggered when using the arrow buttons to navigate between defects in the Details dialog box.Change Request: 183184 [Internal] Problem: The workflow function FieldCanChange is not triggered when clicking Pass and Fail in the manual runner compact view.Change Request: QCCR1J18308 Problem: The workflow subroutine Run_MoveTo cannot hide buttons in the Test Runs view. Limitation: QCCR1J23698 Once the Continue Manual Run button is disabled in the workflow ManualRunner.Run_MoveTo() subroutine, it cannot be enabled again.Change Request: QCCR1J22106 Problem: The TestSet_Field object is empty when re-entering the Test Lab module.Change Request: 182930 [Internal] Problem: Impossible to hide the BG_BUG_id.Change Request: 185528 [Internal] Problem: When setting all the fields of a defect to be visibly false on MoveTo, an Object Reference error message is displayed.Change Request: 183034 [Internal] Problem: If the workflow function Run_MoveTo is defined in both Manual Runner and Test Lab, then the Test Lab instance is ignored. Solution: Run_MoveTo is removed from the Manual Runner module (unless the customer already has it defined in the module) to avoid the recurrence of this scenario. Also, a warning message is added in the Script Editor when this duplication is detected. Limitation: For customers that already have this duplication, the Manual Runner instance will still be ignored.Change Request: 75335 [Internal] Problem: The QC client does not react to workflow events Template_Attachment_* in the Release module for linked projects.Change Request: 104014 [Internal] Problem: The reschedule cycle does not call the canChange or Change functions.Change Request: QCCR1J21282 Problem: If the Bug_FieldCanChange validation fails, the old value is not restored. Limitation: If the Bug_FieldCanChange validation fails, the old value is restored if you press the ESC key.Change Request: QCCR1J20006 Problem: Workflow cannot change the default Req Type.Change Request: QCCR1J22105 Problem: Clicking Add Comments from the Defects grid view, does not cause an action.Change Request: QCCR1J20738 Problem: The Add Comment button in Defect Module does not trigger the FieldComments.AddComment action.Change Request: QCCR1J20432 Problem: Assigning a new list based on another list value, does not display the braches in the tree (sub items).Change Request: 95293 [Internal] Problem: The URL of an ALM entity contains 127.0.0.1 in the address in any mail sent from the project, even when Site Administer opens locally first, after starting the server on Windows.Change Request: QCCR1J21537 Problem: When filtering in Defects module, the TTDRecord.AddItem dialog box opens.Change Request: 182510 [Internal] Problem: SP1_E2E - Impossible to edit the Link Comment field when there is only one linked defect in the grid.Change Request: 180411 [Internal] Problem: When the Data-Hiding Filter is enabled while creating an entity that does not match the filter, the error message: Item of type <Cycle> with ID does not exist is displayed, instead of Create and hide this entity.Change Request: 81629 [Internal] Problem: The AUTO_MAIL_SUBJECT_FORMAT does not work.Change Request: QCCR1J22346 Problem: Week should start with Monday instead of Sunday based on the regional settings.Limitation: JVM takes the locale from the user running it. Change Request: QCCR1J22589 Problem: Problems with the IGNORE_TEMPLATE_LIST in QC 10.00.Change Request: QCCR1J22655 Problem: Removing Defect module access removes the ability to add content to a Library.Change Request: QCCR1J22824 Problem: When the data hiding filter is generated from a template, an error message is displayed.Change Request: QCCR1J22794/4635001933 Problem: You cannot change the memo field style and font in the project reports.Change Request: QCCR1J20639 Problem: When trying to change the DB CONNECTION String, there is an access violation at the address 05BE966F in SITEA~1.ocxChange Request: QCCR1J22249 Problem: You can request to have ALM-PC 11.00 Lab Management available through ALM Explorer.Change Request: QCCR1J22439 Problem: There are missing images when Document Generator report is opened from a different machine. Limitation: This fix is applied to Document Generator only.Change Request: QCCR1J22548 Problem: The option Test: Type for X-Axis in the summary graph in Live Analysis is not available in ALM 11.00. Limitation: This fix is applied to Document Generator only.Change Request: QCCR1J22946 Problem: Drilling down into Live Analysis freezes the UI.Change Request: QCCR1J22251 Problem: Users list is visible in web gate logs.Change Request: QCCR1J21459 Problem: Legacy OTA - When trying to send several extension entities, a problem-mail is sent.Change Request: QCCR1J21297 Problem: PolicyStatus.Administrators returns incorrect list.Change Request: QCCR1J19457 Problem: Accessing the ALM login page when the Protected mode is turned on gives a strange error message which has no logical meaning.Change Request: QCCR1J22974 Problem: QC Client loading fails via RevProxy with InvalidServerResponse.Change Request: QCCR1J22449 Problem: QTP Automation: QuickTest.Application.Test.SaveAs fails in the QC project.Change Request: QCCR1J23650 Problem: When importing tests using the Excel Add-in (on patch 7), the process hangs.Change Request: QCCR1J20742 Problem: The Subject field is blank in the execution grid in ALM 11.0 SP2.Change Request: QCCR1J21094 Problem: Test Plan behavior change within Test Plan Folders: When you rename a folder, the new name should be updated under Filter/Sort -> Subject.Change Request: QCCR1J21093 Problem: Attachments that were attached to the steps during a manual run do not get saved to the Test Plan after clicking Yes when prompted.Change Request: QCCR1J21504 Problem: Expanding Test Plan Folders has a performance issue.Change Request: QCCR1J21861 Problem: Design steps disappear after check-in of multiple tests.Change Request: QCCR1J21910 Problem: Expanding the Test Plan Subject folder is extremely slow (aprox. 2 minutes) when having many first level subfolders and entering the Test Plan module positioned on the root Subject Folder.Change Request: QCCR1J20788 Problem: Error: Object reference not set to an instance of an object. when trying to add iterations to a group of components in existing tests.Change Request: QCCR1J21928 Problem: When a flow output parameter has no source component output parameter, it is impossible to run the test. Limitation: If the flow output parameter is linked to a component input parameter, it is still impossible to run the test. (In this case, you must remove existing linkage or just link the flow output parameter to a component output parameter.)Change Request: QCCR1J21181 Problem: Accessing the Help on this page option in ALM 11 results in JIT errors.Change Request: QCCR1J22028 Problem: When there are a lot of test configurations that cause the window to have a vertical scroll bar, there is an issue with the scroll bar: When clicking the arrows for the scroll bar quickly, it causes the highlighted record to open.Change Request: QCCR1J20846 Problem: Cannot convert a Manual Test to QTP in a VC-enabled ALM project if the test has an attachment.Change Request: QCCR1J20983 Problem: Text changes are lost from the Description tab when switching test cases in Test Plan.Change Request: 179703 [Internal] Problem: An object reference error message appears when clicking the OK button in the parameters dialog box.Change Request: QCCR1J20520 Problem: When creating a defect with all of the info entered via the manual runner and then cancelling it, the information is kept when a new defect is created from the Defect module. Limitation: If we open New Defect Form for Manual Runner, we clear all stored data, thus, stored data in Defects Module New Defect form is lost.Change Request: QCCR1J20977 Problem: Test details are not populated to the Defects description when generating a defect via the Manual runner.Change Request: QCCR1J21954 Problem: Run conditions are corrupted. All the run conditions from QC 9.2 became corrupted in ALM 11.0 and need to be reset manually.Change Request: QCCR1J20380 Problem: There was a wrong implementation of the HasIndicator property for the TestConfiguration view. Limitation: Every test contains at least one configuration, we show an indicator if a test has two or more configurations.Change Request: QCCR1J20204 Problem: Pop up warning message appears when running a manual test in compact view, rather than when editing the description and expected result of a step. Limitation: If a user starts to edit Run Step (Actual field, for example) then he can edit all other fields without warnings. The proper info message appears when the user tries to save the run.Change Request: QCCR1J21101 Problem: Automated execution from Test Lab does not run all of the iterations selected.Change Request: QCCR1J22025 Problem: Test Instance Details > Execution Settings > Automated tab > Parameters have duplicate characters in ALM.Change Request: QCCR1J21389 Problem: The Version Status fields are not visible in QC 10 projects upgraded to ALM 11. Limitation: Fix does not include these flows: a) Import ALM11 project from qcp of previous ALM11 Patches b) Restore ALM11 project from previous ALM11 Patches.Change Request: QCCR1J19890 Problem: ALM-Client possible memory leak when using manual runner.Change Request: QCCR1J18479 Problem: While moving the test set folder to another destination, the confirmation dialog box Are you sure you want to move... does not pop up.Change Request: QCCR1J20978 Problem: SQL injection vulnerability through search in UI - Test Lab.Change Request: QCCR1J20977 Problem: Test details are not populated to the Defects description when generating a defect via the Manual runner.Change Request: QCCR1J22362 Problem: Trying to attach something to a default test set (Root -Unattached-default) results in a non-visible attachment.Change Request: 178501 [internal] Problem: The error message Unable to cast object of type UnattachedTestSetFolderCore to type Mercury.TD.Client.Ota.Core.LowLevel.IAd apteeProvider appears when using refresh under the Unattached folder in Test Lab.Change Request: 179984 [Internal] Problem: Test Set Details tab: when we erase text from a required field, an Object Reference error message appears.Change Request: 180085 [Internal] Problem: Automatic Runner - Parallel Execution feature is not supported in ALM11 but is displayed in the UI and can be selected by the user.Change Request: 180308 [Internal] Problem: The list of statuses is cut in the Test Runs tab and also everywhere else where it is visible.Change Request: 180412 [Internal] Problem: While staying on a default test set and doing Logout and Login to the same project, an error message appears: failed to get test set value.Change Request: QCCR1J21691 Problem: attachment.filesize returning 0 inside Attachment_New event in all modules in ALM 11.Change Request: QCCR1J22331 Problem: After installing Patch 06 on ALM 11, performance on Win7 x64 is slow.Change Request: 179259 [Internal] Problem: when trying to access ALM server with SSL and IIS and with no credentials provided, loading the login page is needs five minutes to get started.Change Request: QCCR1J20266 Problem: When typing the Korean characters in the Quality Center fields, each syllable is displayed only after next syllable is typed.Change Request: QCCR1J21422 Problem: When new custom memo fields are created in a project connected to a template, they have field names that are taken from the template.Change Request: QCCR1J22900 Problem: When special characters (Left and Right Arrows etc.) are inserted in the description field, it causes text in the editor to overlap.Change Request: QCCR1J20293 Problem: When using Korean Characters to search for users, it takes more than 30 seconds for it to return the result. On a user-list field, select the field and enter a character to search.Change Request: QCCR1J20542 Problem: The text indent functions (both increase and decrease) do not work in the description field. Limitation: : While doing Increase indent and then Numbering or Bullets, the position of the text is not saved.Change Request: QCCR1J21009 Problem: Users belonging to groups with permission to modify defects and requirements comments only by the owner, cannot modify the comments even if they are the actual owners (the user Assigned To) of the entities.Change Request: QCCR1J20463 Problem: When a user inserts the character \ on a German keyboard using Alt-GR, no warning is directly given for forbidden characters.Change Request: QCCR1J20987 Problem: Error message Unexpected File Format is returned by QuickTest when trying to open a baseline from most of the tests of a specific ALM project.Change Request: QCCR1J21127 Problem: Cannot run test with Sprinter inside ALM11.0 using ALM Explorer (when using port 80).Change Request: QCCR1J20714 Problem: Run with Sprinter action is not triggered after user logs off.Change Request: QCCR1J20867 Problem: QuickTest cannot submit defects automatically.Change Request: QCCR1J21461 Problem: QC Sense Causes high memory usage and eventual hang of process - QC consumes between 500MB to 1000MB of memory under heavy load when QC sense is turned on. Limitation: Measures will be taken for first 500 requests; the rest will appear in a merged measure. This number can be change with the configuration tool.Change Request: 184017 [Internal] Problem: Defect Execution Report runs display the latest run first.Change Request: QCCR1J19792 Problem: Excel export reformats dates.Change Request: 183095 [Internal] Problem: The Replace functionality in the RichText does not do the replace correctly when the value to replace is a single character.Change Request: QCCR1J20952 Problem: An error message is received when clicking Edit -> Clear Alerts from the Grid View in Requirements Module. Limitation: If we click Clear alerts in grid view - all alerts will be cleared.Change Request: QCCR1J20601 Problem: The view order tab is missing from select requirements.Change Request: QCCR1J14392 Problem: when double clicking on a requirement, the action actReqDetails is not activated.Change Request: QCCR1J21562 Problem: Cannot select multiple requirements and assign them to the same test.Change Request: QCCR1J21013 Problem: Cross Filter: Requirements Trace To and Trace from do not work.Change Request: QCCR1J22254 Problem: Clicking on requirements traceability in requirement details invokes an error Unable to cast object of type MultiValueLis`1[System.String] to type Mercury.TD.Client.Ota.Api.IEntityList.Change Request: QCCR1J20954 Problem: Moving or coping requirements into another folder rearranges/re-sorts them if no filter/sort condition is applied.Change Request: QCCR1J20576 Problem: Requirement coverage and Test coverage tabs with custom execution values show incorrect status of the Test Instance Run. Limitation: Wrong statuses remain the same until the new run.Change Request: QCCR1J17147 Problem: Copy\Paste between servers is not working right: When you copy\paste a req with a rich text image, the image in rich text is not saved.Change Request: QCCR1J20007 Problem: Target Release and Target Cycle are unavailable for update in Update selected in Requirements Grid view.Change Request: QCCR1J22354 Problem: If the user selects a requirement of Functional type and a Rich text field and then activates the refresh button, an Object reference... error message appears.Change Request: QCCR1J21680 Problem: Coverage chart shows the template image instead of the real test statuses while standing on the root requirement folder in the requirements module.Change Request: QCCR1J22484 Problem: The generate traceability matrix button is disabled in Traceability Matrix view in Requirements Module with office 2010.Change Request: 183791 [Internal] Problem: In the New Library window under the content tab, the wrong tab names are presented.Change Request: QCCR1J22552 Problem: Sharing: after importing the library, which consists of BPT and Flow tests, some of Flow tests are Empty.Change Request: QCCR1J21951 Problem: Upgrading QC 10.00 Project to ALM 11.00 -- [SQL Command failed]: in the stage Upgrade BPT component instance iterations and iterations parameters.Change Request: QCCR1J21746 Problem: When upgrading to ALM 11, there is a step to update requirements rich text fields to the new ALM 11 format. This step can be done in the ALM 11 site admin. This request has a way to programmatically trigger that step (site admin API interface), so that it can be fully automated. We added additional API to SAClient.Change Request: QCCR1J22123 Problem: Error when upgrading QC project with BPT test assets.Change Request: QCCR1J21780, QCCR1J21503 Problem: After upgrading QC10 to ALM11, cannot check out BPT application area or access existing test sets.Change Request: QCCR1J21371 Problem: ALM 11: EI 2.6 - Unable to upgrade EI 2.5 enabled QC 10 project to ALM 11 when using Oracle 11g.Change Request: QCCR1J21081 Problem: Sometimes upgrade fails when a project contains standard reports with ComponentFolder /Step / Param.Change Request: QCCR1J19963 Problem: When two automatic runner windows attempt to run/schedule multiple BPT tests on same automation node at the same time, they open multiple instances of the Business Process Execution Agent (bp_exec_agent.exe).Change Request: QCCR1J20271 Problem: If a component is removed from a test in Test Plan, the component parameters from the Parameters tab are removed.Change Request: QCCR1J21409 Problem: The UI response is slow while expanding certain folders in the test plan tree, as well as selecting test instances in the test lab.Change Request: QCCR1J19064 Problem: The BPT Parameter Description is missing if the symbols < and > are used.Change Request: QCCR1J21451 Problem: An invalid URL error is returned while connected to ALM 11.0 via proxy server (use automatic configuration script).Change Request: QCCR1J19848 Problem: Misleading message appears when UAC is set to Always notify and the Internet Explorer is not run as the Administrator.Change Request: QCCR1J22537 Problem: Export from Test lab takes a long time when the filter is used and the excel data generated contains extra records.Change Request: QCCR1J21797 Problem: When making the field BG_DEV_COMMENTS property .IsReadOnly = True, it disables the Add Comment button. When BG_DEV_COMMENTS .IsReadOnly = False and the Add Comment button is enabled, clicking the button does not run the ActionCanExecute where the ActionName can be evalutated.Change Request: QCCR1J20083 Problem: ActiveDialogName does not return dialog names with all active dialog boxes.Change Request: QCCR1J21568 Problem: When defining additional toolbar buttons via workflow and the region format is set to some languages, for example Turkish, the buttons are not added. (This is not reproduced when the format is set to English.)Change Request: QCCR1J21708 Problem: ALM 11.0 SP2 introduces conflicts on existing customization where two action names are triggered for certain user actions. The Administrator needs to add the parameter DISABLE_PRE_ALM11_WORKFLOW_EVENTS into the DATA_CONST table for any project where the old events should not be run.Change Request: QCCR1J21160 Problem: The Workflow does not include the TESTPLAN>PARAMETER tab object.Change Request: QCCR1J22430 Problem: TestSetFolder workflow bug in patch 6: The object does not support the property or method: aTestLabFolder.Move.Change Request: QCCR1J21302 Problem: After making changes using the script generator, the Mail Option in the Assigned To and in the Detected By fields, does not work.Change Request: 180856 [Internal] Problem: Workflow subroutine Run_MoveTo() cannot hide any button, but only on the first time entering a view.Change Request: QCCR1J21491 Problem: An error message keeps appearing when trying to write in a Description field that is defined as Required, after all of its text was deleted.Change Request: QCCR1J21539 Problem: TTDRecord.AddItem Dialog box opens when filtering in the Defects module.Change Request: QCCR1J21135 Problem: After setting the Subject (BG_SUBJECT) field to Required, you cannot change the value any more.Change Request: QCCR1J21843 Problem: When a user creates a new defect and there is a data hiding filter preventing this user from seeing this bug after creation is completed, the error message Item of type <BUG>, with Id<#> does not exist appears.Change Request: QCCR1J21076 Problem: ALM 11 SP2: ALT-G in the Defect module opens in a separate Defect Window.Change Request: QCCR1J20133 Problem: MSI Generator fails when ALM 11.0 is installed on Linux Suse OS.Change Request: QCCR1J19243 Problem: On ALM11 with Service Test management installed, the MSI generator fails to generate the MSI file. Error: Failed to create ALM Client.Change Request: QCCR1J22224 Problem: The error message object reference not set to an instance of an object appears in the Dashboard Analysis view.Change Request: QCCR1J20534 Problem: The editing subfolder name is not saved in the Analysis Module.Change Request: QCCR1J19434 Problem: Intermittently, Dashboard Module Graphs do not generate.Change Request: QCCR1J22116 Problem: Special chars (*, , and \) are allowed while renaming items/folders in the tree view of the Analysis and Dashboard modules.Change Request: QCCR1J17097 Problem: Disable actions in the Management module do not work.Change Request: QCCR1J19960 Problem: Some imported Xpdl model diagrams that are very complex do not show the exhaustive paths possible. Limitation: We do not allow paths that pass an edge more than once.Change Request: QCCR1J21146 Problem: ARIS business model import - support for System Function (Target).Change Request: QCCR1J20791 Problem: IE 8 crashes after logging out of Site Admin and navigating to a different URL.Change Request: QCCR1J22022 Problem: When a file prior to 1/1/1970 is in the repository, create project and/or copy project fail.Change Request: QCCR1J22122 Problem: The ALM server goes down with memory errors whenever trying to use a report that contains millions of test instances. Use the parameter MAX_TEST_INSTANCES in site configuration with the appropriate limit.Change Request: QCCR1J21398 Problem: After installing patch 6, there was some performance degradation while working with the ALI and PC extensions installed.Change Request: QCCR1J21085 Problem: QC Service crashes with an out-of-memory message when building very large graphs. Change Request: QCCR1J21933, QCCR1J22315 Problem: There is no possibility to add a filter for data-hiding, Auto mail, or project planning and tracking in customization.Change Request: QCCR1J13899 Problem: Cross Project Customization stop button does not work.Change Request: QCCR1J19866 Problem: On QC 10 Cross Project Customization: Very slow performance when applying customization and viewing the project list from a Template project.Change Request: QCCR1J22921 Problem: Compare baselines: A renamed TestSetFolder does not show up as Modified.Change Request: QCCR1J17537 Problem: Comparing VAPI-XP test entities fail in the Libraries module.Change Request: QCCR1J22042 Problem: While doing login or refresh, the error message Failed to get test set value appears after you pin the test set to the baseline in the Unattached folder.Change Request: QCCR1J20575 Problem: STM on ALM11: On the Drill-Down Result window for Analysis Graphs, some of the icons are missing.Change Request: QCCR1J20268 Problem: If the Business Process Modeling module is hidden, the BPM link views (in the Requirement and Test Plan modules) are also hidden.Change Request: QCCR1J21492 Problem: When the page size is big, you cannot retrieve audit data through REST .Change Request: QCCR1J21493 Problem: Retrieving audit data through REST does not return the log ID and therefor there is no way to know the audit order.Change Request: QCCR1J22766 Problem: REST API - adds visible property for customization field resource.Change Request: QCCR1J22454 Problem: Access violation... error message appears while defining the Subject filed for the defects posted from the HP Run Viewer Result (QTP11 report).Defect ID: QCCR1J19929 Problem: .Net Framework error on the login page.Defect ID: QCCR1J19259 QCCR1J18246 Problem: The user interface does not allow the characters \ / : " ? < > | * %. However the User Guide only forbids the characters \ * , therefore the characters / : " ? < > | % are not accepted by the user interface. Note: The characters \ * are still forbidden as they were in past releases.Defect ID: QCCR1J19136 Problem: Not all fields in the new Requirement dialog box are accessible from workflow's Run_New.Defect ID: QCCR1J19185 Problem: Requirements report with Trace to Sub reports is not working as expected.Defect ID: QCCR1J19128 Problem: Status values are displayed instead of Test Plan folders when using the 'Generate Tests' option from Requirements.Defect ID: QCCR1J18877 Problem: When selecting the "Risk Assessment" tab, the user encounters "Object reference not set to an instance of an object" or "index was outside the bounds of the array" when the selected Requirement is of the 'Assessment' type (not the Analysis type).Defect ID: QCCR1J18143 Problem: After changing a filter in the test coverage view (requirement module), the chart (in the bottom part of the view) continues to display a summary of all entities..Defect ID: QCCR1J20369 Problem: After changing a filter in the test coverage view (requirement module), the chart (in the bottom part of the view) continues to display a summary of all entities.Defect ID: QCCR1J19091 Problem: Only part of the EnterModule subroutine runs the first time the specified module is entered. Limitation: If any action was unhandled, then no exception will appear.Defect ID: QCCR1J19528 Problem: Customization of Comments button is not available when using Workflow. Limitation: In order to hide the "Add Comment" button in the Defects Details Dialog, there is a need to add code toTools -> Customize -> Workflow -> Script Editor -> Project Scripts -> Defects Module Script -> BUG_MoveTo ->Sub BUG_MoveTo Actions.Action("BugAddDevCommentsAction1 ").Visible=False End Sub.Defect ID: QCCR1J19619 Problem: Problem with workflow methods isVisible and PageNo.Defect ID: QCCR1J18278 Problem: Changing field names through mouse click does not trigger FieldCanChange and FieldChange events.Defect ID: QCCR1J18116 Problem: All graphics disappear from the Rich Text tab after synchronization with another library baseline.Defect ID: QCCR1J18204 Problem: Progress graphs with the value "Sum of" in the "Y-axis" option display empty graphs.Defect ID: QCCR1J18909 Problem: Run-time iteration data is lost when iteration status is Configuration Based.Defect ID: QCCR1J21015 Problem: Error: "Failed to get simple key entity" Milestone Master plan scope Items can only have max 30 per release.Defect ID: QCCR1J19561 Problem: When adding iterations and switching between Single and Multiple iteration view, receive this error: "Index was out of range. Must be non-negative and less than the size of the collection. Parameter name: index"Defect ID: QCCR1J19122 Problem: Text Search Failed when trying to search for a valid word in the "Design Steps. Limitation: There is a need to perform the following steps in order to fix the problem in the corrupted project: 1. In site admin open project. 2. Open SYSTEM_FIELD table, run SQL statement: select SF_IS_SEARCHABLE from SYSTEM_FIELD where SF_TABLE_NAME = 'DESSTEPS' AND SF_COLUMN_TYPE = 'memo' 3. If at least one returned record is set to 'N', run SQL statement: update SYSTEM_FIELD set SF_IS_SEARCHABLE ='Y' where SF_TABLE_NAME = 'DESSTEPS' AND SF_COLUMN_TYPE = 'memo' 4. 4.1 In "Microsoft SQL Server Management Studio" connect to the SQL server , then open the DB. Right click td.DESSTEPS table, select "Full-text Index" , "Define Full-text index" select these memo fields. 4.2. There is a need to restart QC Server once you apply SQL statements to the project on Oracle DB. If the issue is still reproducible on Oracle Project: a) Export Oracle project to QCP file (corrupted project). b) Delete corrupted project from Site Admin. c) Import QCP File to Site Admin on MSSQL DB. d) Run SQL Statements described above (apply fix for this project) e) Export fixed project to QCP file. f) Delete fixed project from Site Admin. g) Import fixed project from QCP file on Oracle DB.Defect ID: QCCR1J20849 Problem: Test Plan screen redraw showing hidden fields after check-in or check-out an entity. Defect ID: QCCR1J20720 Problem: Deleting parameters that have already been used in a Test Step are not being deleted/renamed correctly Defect ID: QCCR1J19192 Problem: Test Instance Details does not remember Run Columns.Defect ID: QCCR1J18908 Problem: Run_MoveTo is not fired on changing view to Runs.Defect ID: QCCR1J19380 Problem: "Exception from HRESULT: 0x800400CF" is displayed when cancelling a Run from Manual Runner. This problem arises only when Data Hiding is activated.Defect ID: QCCR1J17898 Problem: The 'Show full path' check box is invisible when the X-Axis is set to 'Test Set: Name'.Defect ID: QCCR1J19356 Problem: When a TimeDependency item has only time specified, it does not behave as expected.Defect ID: QCCR1J19592 Problem: Test set instance values are not reset to 'No Run' after copying them from existing projects.Defect ID: QCCR1J19138 Problem: Parameter Order is random when running Tests in ALM 11.0.Defect ID: QCCR1J19302 Problem: When using a user defined step status - "Conditional Pass, once the run is complete the status is "Not completed. The runs Status should display as "Conditional Pass".Defect ID: QCCR1J20974 Problem: Parameter 'actual' values are not displayed when running a test.Defect ID: QCCR1J20973 Problem: Adding multiple test cases to test lab that contain parameters does not correctlyDefect ID: QCCR1J19072 QCCR1J13899 Problem: No informative label on the Form. Defect ID: QCCR1J18906 Problem: Failed to upgrade Quality Center 9.2 to ALM 11.0 11 with Java exception "Stack: java.lang.ArrayIndexOutOfBoundsException ". FavoriteDataUpgradeHelper throws an ArrayIndexOutOfBoundsException during the upgrade process if corrupted favorites are present.Defect ID: QCCR1J16047 Problem: Threading issue in ALM Patch 1.Defect ID: QCCR1J19266 Problem: After the Quality Center 9.2 project became ALM 11.00-, sub reports did not copy over.Defect ID: QCCR1J19190 Problem: AuditRecord object's Time property shows only the data.Defect ID: QCCR1J18901 Problem: Font and its size is not editable in the Defect description. Limitation: There are several formats that aren't supported (I.e. strike). 1) Font and Size are not ignored if we select some text before paste. 2) By pressing "del" at the end of text line - text changes its font and size. (Reproduces only if the dialog is selected and is not moved to another defect.)Defect ID: QCCR1J20934 Problem: Attachments is showing a size of 0kb and date of 1/02/1970 12:00:00 AMDefect ID: QCCR1J15384 Problem: Defects last 'Modified' date gets updated even when you click the 'Cancel' button.Defect ID: QCCR1J18229 Problem: The "detected in cycle" field is not automatically filled when reporting a defect from the execution of a test.Defect ID: QCCR1J18826 Problem: The Execution report does not contain proper information in the case where the user runs whole test sets.Defect ID: QCCR1J21317 Problem: ALM server goes into MUTED mode and to restart the ALM service. Issue is related to AutoMailing. Limitation: Corruptions in DB are not fixed with this CR. Note: Added MAIL_RESEND_ON_ERROR parameter to avoid re-sending of failed mail notifications.Defect ID: QCCR1J18436 Problem: When the user got error messages trying to login to QC saying his licenses ran out, a quick check on the Licenses tab actually showed that the licenses were all used, however when looking at the Connections tab, the number of connected users was way below the license limit.Defect ID: QCCR1J18472 Problem: There were 2 different ways of password encryption for LDAP settings saving. Both of them applied to the server, but not to the UI.Defect ID: QCCR1J18321 Problem: Error HRESULT E_Fail when selecting a keyword driven component.Defect ID: QCCR1J18206 Problem: When the user edits the component step entities through the grid and moves to another component entity, the last changes made in the grid are not saved to the edited step.Defect ID: QCCR1J19038 Problem: The Output parameter value is not passed to the Flow Input parameter.Defect ID: QCCR1J18779 Problem: After removing the link between the test parameter and the bp iteration parameter, the value in the bp iteration parameter stays and QC still thinks the link exists.Defect ID: QCCR1J19404 Problem: BPT - Email to designer function regression.Defect ID: QCCR1J18727 Problem: Unable to ungroup components after upgrade to ALM 11.Defect ID: QCCR1J18741 Problem: BPTWrapper Defect - Error: "Failed to Generate Test Instance XML" in the Automation Runner window.Defect ID: QCCR1J20667 Problem: QC BPT is having a problem with Dates and anything that contains dashes.Defect ID: QCCR1J17822 Problem: Last Modified date value gets set immediately before the user can hit the Ok button on the Defect Details dialog box. If you modify a field within an already created Defect, Modified date gets set right away. Once this update is made, clicking on the Cancel button does not undo the changes, and the Defect record gets updated with this timestamp.Defect ID: QCCR1J18684 Problem: The move to workflow event was not called from sprinter when opening the defect dialog box from sprinter.Change Request: QCCR1J17553 Problem: QC/ARIS/business process modeling issuesChange Request: QCCR1J16181 Problem: Creating a new project by copying another drop Business Model infoChange Request: QCCR1J16357 Problem: Unable to copy design steps in some test cases. TS_STEPS field getting reset to 0 even though test steps existChange Request: QCCR1J18664 Problem: When creating a test prameter and the name contains spaces, the parameter gets duplicated after it is added to the design step.Change Request: QCCR1J17570 Problem: Selected text in DesignStep disappears when clickedChange Request: QCCR1J19110 Problem: Components in Test Flows lost when copying a BP test typeChange Request: 91977 [Internal] Problem: The test configuration data relation is not listed in the tests dependencies Using list.Change Request: 96303 [Internal] Problem: The wrong help item is displayed for the Data Resource Settings dialog box.Change Request: 97631 [Internal] Problem: In version controlled projects, an unclear message is displayed when adding a new test configuration that was never checked in to a test set.Change Request: 97682 [Internal] Problem: When you copy and paste an instance of a test or a test test that contains the max title length (255 symbols), ALM shortens the name to 6 symbols + the word Copy.Change Request: 97717 [internal] Problem: In a version-control enabled project, after a test is checked out/in, the green indicator star on the Linked Defects tab of a test with linked defects is not displayed.Change Request: 103473,103472, 80989, 97202 [Internal] Problem: Pressing CTRL + TAB in the Test Plan module changes the view and switches to the Management module.Change Request: 97369 [Internal] Problem: It is impossible to edit a link comment field if there is only one linked defect in a test.Change Request: 96680 [Internal] Problem: If you switch to the grid view after updating an entity in the tree view, the wrong details may display in the grid view.Change Request: 97666 [Internal] Problem: The Close button in the New Component dialog box is not translated in localized versions.Change Request: 92318 [Internal] Problem: Design steps rows may not resize correctly.Change Request: 92632 [Internal] Problem: Only the upper half of the text in design steps is visible.Change Request: 67468 [Internal] Problem: In the Test Plan module, attachments with long file names are attached with zero size or are not attached at all.Change Request: 103720 [Internal] Problem: When exporting data from the test plan grid to a text file, the Subject column length does not match the actual data size. This also occurs when exporting grid data with a field that references another entity.Change Request: 96428 [Internal] Problem: When working in the Test Plan module, if you leave ALM idle for 10-15 minutes, when you next try to move between steps, a large cross appears in the Design Steps tab with an error message.Change Request: 95264 [Internal] Problem: In the Design Steps tab, when pointing the cursor at the Name column of a Call to Test link, the cursor switches from pointer to arrow.Change Request: 103940 [Internal] Problem: When moving between a manual test to a test that cannot be converted to a component (for example, VAPI-XP-TEST), the Convert to Component button remains disabled according to the previous selected test.Change Request: 98308 [Internal] Problem: On the Linked Defects toolbar, the Link Type list is missing a label and tooltip.Change Request: 96170 [Internal] Problem: BPT: Error is displayed when importing values from a CSV file in the Iterations dialog boxChange Request: 94394 [Internal] Problem: The Run/Debug button is disabled in some casesChange Request: 98028 [Internal] Problem: Iteration selection is not available in the Test Script tabChange Request: 104027 [Internal] Problem: Buttons are incorrectly enabled in the Automation tab when opening a component from the Test Plan moduleChange Request: 96511[Internal] Problem: Test content is changed when copy and pasting a test with flowsChange Request: 96945 [Internal] Problem: Cannot Go to Component when the component is in the Obsolete folderChange Request: 178750 [Internal] Problem: The Create Test Parameter feature does not work on the first iterationChange Request: 95597 [Internal] Problem: Unneeded underlines appear in the From and To fields when selecting a separation.Change Request: QCCR1J17085 Problem: Execution time is not correct if the test run passed the midnightChange Request: QCCR1J14809 Problem: Regression- No popbox when a adding a test with parameters to a testsetChange Request: QCCR1J19109 Problem: Grid Filter box removed at Top of Column in Test LabChange Request: 178324 [Internal] Problem: The navigation panel in Live Analysis of Test Lab is cut if the graph has more than 10 pages.Change Request: 91892 [Internal] Problem: In a pinned test set, it is impossible run a test instance of a test that has been deleted even though the test instance exists.Change Request: 97044 [Internal] Problem: In version controlled projects, generating a new test configuration incorrectly performs a check in automatically.Change Request: 97946 [Internal] Problem: When searching for a test set folder, clicking the Go To button in the Search Results dialog box does not navigate to the test set folder.Change Request: 95351 [Internal] Problem: A child test set folder cannot be assigned to a cycle different from the cycle to which the parent test set folder is assigned. However, the child of the child can be assigned to a different cycle. It should not be possible.Change Request: 97627 [Internal] Problem: If a user list user defined field is added to the Test Set entity, the Send E-mail button is displayed in the field, even though you cannot mail test sets.Change Request: 97166 [Internal] Problem: The context menu in the Test Lab tree becomes unresponsive when navigating between menu items.Change Request: 103567 [Internal] Problem: The Previous/Next step buttons in the Manual Runner for Business Process Testing do not function as expectedChange Request: 97501[Internal] Problem: Sprinter fails to run some business process testsChange Request: 97677 [Internal] Problem: An incorrect error is displayed when trying to run a business process test that accesses a dynamic data test configuration on a Sprinter machine that does not have Excel installedChange Request: 94200 [Internal] Problem: An error is displayed when launching a scripted component from a baselineChange Request: 95008 [Internal] Problem: After running a business process test/flow, the results report is not opened.Change Request: 103775 [Internal] Problem: The following non-translated message appears on the login page: Failed to Connect to Project The message will appear in English.Change Request: 103601[Internal] Problem: The login button in lab management was not translated in non-English versions.Change Request: 90935 [Internal] Problem: Pressing CTRL + TAB in the login page opens the Forgot Password page.Change Request: 98013 [Internal] Problem: When resizing the ALM login window, no scroll bar displays.Change Request: QCCR1J16090 Problem: QC crashes whenever running the Verify on a cross-project customizationChange Request: 103640 [Internal] Problem: An error is displayed when trying to propagate shared customization changes between template and linked project s, and there is a KPI Type in the template project with the same name as a KPI Type in the linked project but with a different Entity Type field.Change Request: QCCR1J16773 Problem: Display membership list in alphabetical order.Change Request: QCCR1J15382 Problem: Failed to commit customization changes when adding user fields to requirements in Template project.Change Request: 98046 [internal] Problem: In project customization, when renaming a UDF by changing the case only (for example, status to Status) the changes are not saved.Change Request: 99004 [internal] Problem: In the Project Planning and Tracking customization page, in the General tab, the items of the KPI is better when values are dropdown list are not translated to the current language.Change Request: 103381[internal] Problem: Last Verification date and Last Applied Customization date display label2, label3.Change Request: 96684 [internal] Problem: After making changes in the Cross Project Customization page, the Confirm dialog box for saving or canceling the last changes is not displayed, and changes are saved.Change Request: 103635 [internal] Problem: The Project Customization user interface stops responding after the following user actions are performed: navigating to the Cross Project Customization page, navigating to another page and then back to the Cross Project Customization page, and clicking on one of the report links.Change Request: 178370 [internal] Problem: Several non-customizable Test Configuration fields are displayed in Project Customization.Change Request: 103717 [internal] Problem: After renaming a user group and changing a character from lower case to upper case, the error message Failed to commit customization changes displays.Change Request: 97575 [internal] Problem: In the Cross Project Customization report, the name of a newly added list is displayed in the Value column, with no value in the Name column. The newly added list name is now displayed in the Name column with the value [New List].Change Request: 178712 [internal] Problem: When you run the Verification process before applying cross project customization, the process fails and the error no such interface supported displays. A large report resulting in a large SQL query may exceed the default query size limit of 1000000.Change Request: 78734 [internal] Problem: The Verification and Applied Customization reports do not record the change of an icon associated with a requirement type.Change Request: 97538 [internal] Problem: When the verification process completes, a message that verification completed successfully displays, although the verification report may contain a warning.Change Request: 94989 [internal] Problem: The Project Customization navigation panel cannot be collapsed.Change Request: 97389 [internal] Problem: An error message appears when trying to save changes in RBQM category Functional Complexity tab in Customize module. Change Request: 96126 [internal] Problem: After verification or propagation, the selection in a grid always moves to the first linked project.Change Request: 98702 [internal] Problem: For localized ALM 11 versions, module names are not translated at the Workflow Customization, Toolbar Button Editor module selection list.Change Request: 95737 [internal] Problem: The Administration section contains several actions with unuser friendly names.Change Request: 97583 [internal] Problem: Customization permissions actions are not translated.Change Request: 96699 [internal] Problem: The Libraries section contains duplicate actions for capture / create baseline.Change Request: 98268[internal] Problem: Cannot enable history in Customization for user defined fields of projects that were upgraded to HP ALM 11.Change Request: 103601[internal] Problem: The Login button in Lab Management was not translated when using a non English version.Change Request: 97956 [internal] Problem: An information dialog box is shown instead of a warning dialog box when deleting a groupChange Request: 95438 [internal] Problem: Project List sub-items my reappear after being deleted.Change Request: 97598 [internal] Problem: Removing all permissions from Design Steps causes all permissions to be automatically reselected.Change Request: 93354 [internal] Problem: In Requirement Types customization, it is possible to mark a user-defined field as not in type and also required at the same time.Change Request: 94994 [internal] Problem: Formatting of comments field in Cross Project Customization category is sometimes lost (the text changes to plain text).Change Request: 95384 [internal] Problem: Sometimes when opening the help window in Customization, an error appears.Change Request: 96436 [internal] Problem: It is not possible to create more than 5 user defined memo fields per entity.Change Request: 97370 [internal] Problem: When adding a button in the Workflow page, and selecting one of the last 7 icons (from 329-336), it is added without an icon - a red cross is seen instead.Change Request: 178316 [internal] Problem: When adding a button in the Workflow page, and selecting the first icon (folder icon), it is added without an icon - a red cross is seen instead.Change Request: 95603 [internal] Problem: Cannot create a new Lookup list from within the Project Entities category in Customization.Change Request: 97957 [internal] Problem: The Groups and Permissions category in Customization shows the incorrect group name after renaming the group and choosing not to save when prompted.Change Request: 97161 [internal] Problem: The Filter dialog in the Data Hiding part of Customization might show a list of fields which is different than the list of visible fields that were defined in the Visible Fields part. Change Request: 97043 [internal] Problem: The label of a newly defined UDF is reset when choosing another UDF type. Change Request: 97276 [internal] Problem: Error message might appear when customizing the Is required check box of UDFs that participate in a Requirement subtype. Change Request: 97503 [internal] Problem: The The specified RBQM Customization question does not exist error message appears when clicking Return in Customization and then cancelling the save. Change Request: 97031 [internal] Problem: Renaming an item in the Project List category in Customization to an existing name shows warning message instead of error.. Change Request: 97634 [internal] Problem: An Incorrect folder icon appears after adding and removing a sub-item to a lookup list in Project List category in Customization.Change Request: QCCR1J15213 Problem: Alerts triggered when updating requirement through the Excel add-inChange Request: QCCR1J19122 Problem: Failed to Text Search when trying to search for a valid word in the Design StepsChange Request: QCCR1J18685 Problem: When selecting the thesaurus option, Quaity Center throws an error.Change Request: 97117 [internal] Problem: Dragging and dropping filters produces an error message.Change Request: 97391, 97203 [internal] Problem: Some fields may not render correctly when logging into the system in a 64-bit operating system.Change Request: 97965 [internal] Problem: The grid might not show changes done by other users after being refreshed.Change Request: 81279, 92745, 94821 [internal] Problem: Copying selected text in tree may select the entity instead.Change Request: 91511 [internal] Problem: Help on this page in the help menu, might not show the help page in certain scenarios.Change Request: 95303 [internal] Problem: Spell check dialog box does not respond when double clicking on the suggested word.Change Request: 96882,96881 [internal] Problem: Trying to refresh an entity tree or grid after deleting an entity might cause an infinite loop.Change Request: 96590 [internal] Problem: The favorites form could be resized to a size where nothing was visible.Change Request: 97613 [internal] Problem: When clearing alerts, the warning message had an extra line break.Change Request: 97873 [internal] Problem: Inconsistent coloring when copying and pasting an entity.Change Request: 97715 [internal] Problem: When saving an attachment, the world uploading might appear instead of Downloading.Change Request: 97711 [internal] Problem: When Update was selected, it required a refresh to show the changes.Change Request: 95753 [internal] Problem: The Attachments tab did not turn bold after adding an attachment to a newly created entity.Change Request: 97627 [internal] Problem: Send mail functionality will send mail upon pressing the enter key even if the cancel button is focusedChange Request: 97627 [internal] Problem: The Send mail functionality will send a mail when pressing the enter key, even if the cancel button is in focus.Change Request: 97522, 97238 [internal] Problem: Tree selectors do not update when changing the main module tree (e.g. when opening a dropdown selector of the parent requirement in requirements filter dialog box or when selecting a requirement for the Req Coverage in Test Plan module).Change Request: 98600 [internal] Problem: While in grid view, when setting the group filter, standing on an entity that is not in the filter and clicking refresh does not refresh the bottom information pane.Change Request: 90701 [internal] Problem: During the first deployment of an ALM 11 Client, if Internet Explorer was not maximized, it was possible that the user installation became cropped and not fully visible.Change Request: 103972 [internal] Problem: Filtering on Modified field did not work. Either it failed with error, or it returned an empty result when it should not have.Change Request: 90119 [internal] Problem: When adding an attachment to a test, the row with the columns is being duplicated for few seconds. The progress bar was moved to the bottom of the view.Change Request: 98274 [internal] Problem: Hovering over user name does not give its full data (in details view). Change Request: 54822 [internal] Problem: Filters Syntax mistakes were displayed as warnings instead of as error messages. Change Request: 97487, 96047 [internal] Problem: When sorting a user list by clicking the lists column header, the lists scrollbar becomes misaligned.Change Request: 69103 [internal] Problem: When displaying entity details, field names containing long strings of text are cut from the left.Change Request: 97656 [internal] Problem: When displaying a tree with lengthy fields, a tiny overflow icon is displayed to the right of the fields value.Change Request: 97604 [internal] Problem: When grouping user lists by clicking the lists view by group checkbox, search operations do not automatically expand and focus on matching results.Change Request: 97561 [internal] Problem: Dropdowns lack persistency of their last resize operation.Change Request: 97559 [internal] Problem: Ctrl + A does not work in filter dialog box, Filter condition column cells.Change Request: 97818, 97961 [internal] Problem: Lower details pane in entity details view is not properly refreshed.Change Request: 97556 [internal] Problem: Search box borders vanish when typing a search value in the selected tree.Change Request: 98342, 97361[internal] Problem: Lookup list values are only accepted on second attempt when using ALM Explorer. Change Request: 97553 [internal] Problem: Up/Down Arrows do not work in the Go to Entity dialog box.Change Request: 97640 [internal] Problem: It is possible to drag entities from selected trees into trees other than the designated target trees.Change Request: 97551[internal] Problem: Ctrl + Z and Ctrl + A do not work in Go to Entity dialog boxes.Change Request: 94915 [internal] Problem: New line characters are not saved after upgrade in memo fields (they are replaced by small squares instead).Change Request: 95572 [internal] Problem: Adding blank spaces to a value before or after semi colons, in multi-value lookup lists, might cause that value to be removed when the dropdown for the lookup list is reopened.Change Request: 103825, 93235 [internal] Problem: The Go to Entity operation, using ALT+G, takes a long time.Change Request: 97845 [internal] Problem: Some checkbox strings in the Send by e-mail window are cut when using non English locale.Change Request: 95414 [internal] Problem: A floating text box remains inside the entity tree after changing the focus from an entry which contains an invalid value.Change Request: 88065 [internal] Problem: Toolbar shortcuts do not work when the toolbar is in a tab that is not focused.Change Request: 98630 [internal] Problem: Spelling correction of duplicate words doesnt work.Change Request: 87373 [internal] Problem: When entering a number that exceeds the valid range of numeric values in a numeric field, no proper error is displayed.Change Request: 96448, 97371 [internal] Problem: Selecting the last row in a list, while in a grid view that is not fully visible, will scroll to and highlight an incorrect row.Change Request: 97390 [internal] Problem: An Object reference error message occurs when editing a value in the grid view and then resizing the window.Change Request: 97333 [internal] Problem: After entering an invalid value into a grid cell, an Endless error message will be displayed if you adjust the window size using a splitter.Change Request: 97637 [internal] Problem: The Update Selected option prompts an Object reference not set to an instance of an object error message when no entity is selected, for example when the group, but no actual record, is selected.Change Request: 90507 [internal] Problem: In the filter dialog box - the check box Show test with alerts does not affect the result.Change Request: 90296 [internal] Problem: Using the Replace function in the grid view updates an incorrect row.Change Request: 103396 [internal] Problem: Multi selection in a grid remains multiple, even when a single row is clicked.Change Request: 94031 [internal] Problem: When the workflow script changes, while adding a new entity, the field value of the changed field appears at the bottom of the Edit dialog box, but, in the New Entity dialog box, this field appears on top of the other fields, shifting all other fields down.Change Request: 90836 [internal] Problem: When an external module would initiate an external Help page, trying to open a help page would display a white page.Change Request: 86180, 98161 [internal] Problem: When setting the Description and summary fields to be isReadOnly=true, by a Workflow script, they were still editable. Note: the Add comment button is enabled but does not edit the field.Change Request: 90105 [internal] Problem: An entity can be posted by logging out, without filling in all the required fields. Change Request: 97558 [internal] Problem: Missing Find Next ability in list/users/entities selection drop down editors. Change Request: 97348 [internal] Problem: Clicking Enter when renaming an attachment opens it rather than saving the name. Change Request: 178723 [internal] Problem: Remove linked entity button might be disabled even though there is a linked defect. Change Request: 178303 [internal] Problem: The Status bar shows an incorrect number of entities in the grid view, after performing Go to entity to an entity which was not in the filter. Change Request: 97083 [internal] Problem: Error while renaming attachments of type Clipboard. Change Request: 84384 [internal] Problem: Insufficient space and text cut-off for fields labels in the Details tab. Change Request: 87017 [internal] Problem: Ctrl + A does not select all text in field editors. Change Request: 87017 [internal] Problem: Error message appears when switching from tree view to grid view after creating an entity which is not included in the defined filter. Change Request: 97560 [internal] Problem: Some drop downs of field editors are not resizable. Change Request: 97372 [internal] Problem: Text cut-off in the <Entity> <ID> successfully added message in the bottom of new entity dialog boxes. Change Request: 97852 [internal] Problem: Incorrect error message when trying to jump (by a link) to an entity in a module which was set as hidden (in Customization, for the group of the logged in user type). Change Request: 97540 [internal] Problem: Thesaurus dialog might get stuck when typing a word in the Look up combo box editor. Change Request: 97802 [internal] Problem: Cannot perform Go to folder-type entities from the Find results dialog box. Change Request: 95406 [internal] Problem: Snapshot-type attachments do not have an ALM_ name prefix.Change Request: 98744, 81609 [internal] Problem: There is no tooltip for the Search for field, in the Text Search toolbar. Change Request: 88835 [internal] Problem: The height of the QC Welcome page should be bigger to avoid the scrollbar. Change Request: QCCR1J15318 Problem: Error returned when trying to setup mail over SSL/TLS.Change Request: QCCR1J17612 Problem: QC Mail formatting is not OK when using Notes 8.5.1Change Request: QCCR1J14899 Problem: Emails to Groups in QC 11 does not work as expected - only the first user is selectedChange Request: 178762 [internal] Problem: Trying to send a newly created entity via e-mail before saving it causes an error.Change Request: 88943 [internal] Problem: The Search Text area may cut off a labels text in some languages. Change Request: 93896 [internal] Problem: Clicking a linked defect immediately after adding the defect may display the wrong links in the Linked Defects view.Change Request: 97670 [internal] Problem: Sometimes you cannot send a test mail when configuring the SMTP server.Change Request: 98328 [internal] Problem: You cannot send an email when selecting the Forgot Password link on the ALM login page.Change Request: 179216 [internal] Problem: QC client is not loaded from shared deployment folder in ALM Explorer using IIS web server. Description: When working with ALM Explorer, a colon is added to the URL address even if it is not necessary. A problem may occur if a workstation is running the ALM client and the common mode of the same ALM server. Workaround: The ALM URL address should include a colon and a port number. For example, instead of http://server/qcbin use http://server:80/qcbin Version ControlChange Request: 178508 [internal] Problem: Workflow may change a value of an entity even when not checked out.Change Request: 97805 [internal] Problem: New user defined memo fields may be created as non-versioned on a version controlled project.Change Request: 96695 [internal] Problem: When drilling down to a different project in a cross project graph, the last user who logged on to the project is displayed, and not the user who performed the drill down.Change Request: 74277 [internal] Problem: This limitation occurs when we have a user-defined field with the same name, on the same entity, but with the different types (one is User_List, and the other is String) in two projects. In such cases, if we create a cross-project summary graph with these two projects, the user-defined field will be available in the X-Axis field list and the Group-By field list. In this case, the user-defined field should not appear in the available field list.Change Request: 55869/57115 [internal] Problem: This limitation occurs when we create a summary graph with a field that can have identical display values and different IDs. For example, we can give the same name to two different test sets, when theyre not under the same parent folder. So when we create a test set summary graph, with test set name specified as the X-Axis field, we will find those two test sets are regarded as one test set in the graph generation. So the graph result is incorrect. in the summary graph and the age graph only. Limitation: The problem still exists in the progress graph and the trend graph.Change Request: 82903 [internal] Problem: This limitation occurs when we create a graph with a field which has multi-values. In the graph result, we can see the multi-value is shown as a single value, instead of the split values. For example, if we have a user-defined field which allows multi-values, and one entity has the value 1;2 and another entity has the value 1. Actually in the graph were expecting two entities with value 1 and one with value 2. However we get one entity with value 1;2 and one with 1.Change Request: 96655 [internal] Problem: When coping/pasting project reports between projects, if there is a type mismatch between the project templates of the source and target projects, a generic Failed to Post Data error message is displayed. Solution: The following, detailed error message is displayed: The {project report name} project report cannot be copied to the current project: A report template type in the current project does not match the corresponding report template type in the source project.Change Request: 94802 [internal] Problem: If you log in and go to the Analysis View without permission to modify, and try to change a reports description, the No permission to remove an item error message appears.Change Request: 77494 [internal] Problem: Deleting an analysis item\folder should be possible with the Delete key, as it is in all other modules. It is possible only the with Ctrl + Delete keys.Change Request: 80124 [internal] Problem: The Dashboard modules shortcut for creating a new folder is different from similar shortcuts in other .Net modules. Ctrl + Alt+F - creates a new folder in the Dashboard module. Ctrl + N creates a new folder in other .Net modules (such as Management and Test Resource).Change Request: 80204 [internal] Problem: The Select Projects window for graphs is missing a Close( X ) button and a Maximize button.Change Request: 178719 [internal] Problem: An exception occurs when trying to generate an excel report.Change Request: 178513 [internal] Problem: After renaming a folder, the Test Plan Standard Report displays the old folder name.Change Request: 98733, 98685 [internal] Problem: Standard Reports: The PrintAll option does not work. PrintAll prints empty pages or does not print at all.Change Request: 82168 [internal] Problem: Excel reports: String fields that contain number strings are converted into cells formatted as numbers.Change Request: 71332 [internal] Problem: When you create a defect report with Source Execution Test as a sub report, the filter is ignored and all entities are displayed.Change Request: 178490 [internal] Problem: Workflow: You cannot add customization buttons to the Dashboard module.Change Request: 103721 [internal] Problem: Create a scorecard graph in Analysis Module , create a dashboard page , add the scorecard graph to the page, click regenerate button in view tab ? Crash.Change Request: 97699 [internal] Problem: Big gaps appear between text and tables in a report when text and tables were both added to the requirements Description field. To reproduce, create a requirement, change the description field text, and place a table under the text.Change Request: 94254 [internal] Problem: Excel Reports: The run-time error 1004 message message is displayed during Excel report generation when post processing is selected but no data is returned by a query (the query result has no rows)Change Request: 93346 [internal] Problem: Graph Wizard images (example images of graphs that appear in the graph wizard) for Test Instances, Runs and Requirements are not consistent with existing fields, and display non-existing fields.Change Request: 92351 [internal] Problem: Standard Reports: Item Per Page = 1 Printing does not work. Each item should start on a separate page, yet there is no page break.Change Request: 87299 [internal] Problem: Missing shortcuts in Excel Query builderChange Request: 84098 [internal] Problem: Standard Report : Current filter of Test Set tree is not applied in the Cross Test Set with Tests report in the Test Plan module . No matter what filter is set , all the tests are displayed.Change Request: 83680 [internal] Problem: Excel Reports: String fields that contain a date value (Aug-09) are formatted into Date cells instead of remaining string cells.Change Request: 81428 [internal] Problem: Sorting by subject in Test Plan standard reports doesnt work as expected , because the reports are not sorted by subject name. Instead, they are sorted by subject ID.Change Request: 80278 [internal] Problem: The Paste option from the menu is not disabled in the Query tab of Configuration tab of an Excel Report when the user does not have permission to modify Excel Reports.Change Request: 79516 [internal] Problem: If the xsl template of a standard report is invalid, no more reports can be generated until restarting ALMChange Request: 76941 [internal] Problem: Excel Reports: Clicking the Hide button in the Query Builder the first time does not do anything.Change Request: 77324 [internal] Problem: Two Save buttons appear in the Report Selected dialog box, each performing a different action.Change Request: 96484 [internal] Problem: There is an inconsistency in behavior for system fields and user-defined fields in a project report when fields are defined as hidden.Change Request: 96754 [internal] Problem: In the project report Document Output Options dialog box, HTML and PDF should be uppercase.Change Request: 97181 [internal] Problem: When a graph is copied in monochrome mode, the label for each data point or section is shown incorrectly. Instead of the value of the data point or section, the same label text was shown.Change Request: 97264 [internal] Problem: Resizing the configuration tab in the dashboard module doesnt work properly and yields an error message.Change Request: 97345 [internal] Problem: Add an export to Excel button in the tool bar in the analysis drill down view.Change Request: 97710 [internal] Problem: Test Configuration is missing from list in the wizard when creating new graphs.Change Request: 98483 [internal] Problem: Generating or previewing project reports with history fields sometimes failes.Change Request: 90064 [internal] Problem: Users who cannot create private Analysis folders in the Dashboard module can create private Analysis folders by going into another module (for example, Defects), selecting the Analysis menu, selecting a report, and then saving the report as a New Folder.Change Request: 96597 [internal] Problem: Test graphs that are grouped by test configurations execution status do not display correct data.Change Request: 97515 [internal] Problem: When generating a project report, the Project Reports Progress dialog box opens to display the report generation progress. It goes through 4 steps (Generating, Downloading, Rendering and Saving). In steps 1 and 2 the progress bar does not run and stays a blank rectangle. In step 3 it runs and fills up the rectangle. In step 4 it does not run and instead turns into a rectangle full of blue blocks.Change Request: 96621[internal] Problem: Selecting Analysis > Reports > Report Selected when no entity is selected yields an Index out of range error message.Change Request: 96921[internal] Problem: In Project Reports Configuration tab, the Auto Update Table of Contents (This option increases generation time) label was cut in a Japanese environment.Change Request: 97121[internal] Problem: A Blank page instead of help appears for Document Generator when F1 key is pressedChange Request: 95330 [internal] Problem: Clicking links to external sites in a standard report opens inside the standard report view tab.Change Request: 95314 [internal] Problem: When viewing a graph in the Analysis module, the time stated in the Last Generated label may differ from the time stated in the Server Time label. This is because the Last Generated label indicates the time of the local machine while the Server Time label indicates the time of the Site Administration machine which may be in a different time zone.Change Request: 97396 [internal] Problem: When creating two KPI Over Time Graphs one after the other, you receive the followingmessage: Graph cannot be generated because not all fields were configured.. This message appearif the first graphs configuration is not complete when creating the second graph.Change Request: 97374 [internal] Problem: In the Post-processing tab for Excel reports, clicking on the Help button opens the Help for the New Query Parameter dialog, rather than for the Post-processing tab,Change Request: 103929 [internal] Problem: When using Select Columns in the drill-down window, all the records are erased from the drill-down grid.Change Request: 87926 [internal] Problem: The Thin client 3D pie graphs look very different from how they look in ALM (the shape is elongated and the side is not darker than the top of the pie).Change Request: 83373 [internal] Problem: In Thin client 3D line graphs there are thick gray axis lines (the ones separating the floor/left wall with the chart).Change Request: 98889 [internal] Problem: When pasting a requirements filter copied from the requirements model into the requirements section of the Document Generator, the report fails to generate with the error Invalid procedure call or argument 5.Change Request: 97752 [internal] Problem: The Template Creators Word Add-In tab is not translated when Client Culture is switched to a Foreign Language.Change Request: QCCR1J16899 Problem: report causes out of memoryChange Request: QCCR1J16040 Problem: Public Analysis Favorites to be available in Analysis menu like in QC9.0Change Request: QCCR1J17852 Problem: Could not generate excel with more than 65535Change Request: 180010 [internal] Problem: 1. Unable to generate Excel reports when the user has only generate permission. An error message appears when the Generate button is clicked. 2. There is no permission to remove Excel reports.Change Request: QCCR1J18026 Problem: Only for projects with Hebrew support enabled and Right-To_Left selected. When starting to edit a memo editor, an Object reference not set to an instance of an object. error is displayed.Change Request: 98033 [internal] Problem: You cannot export defects to MS Excel.Change Request: 97151[internal] Problem: An incorrect list of invalid characters is displayed in the Detected in Cycle filter.Change Request: 95765 [internal] Problem: The text cursor becomes invisible after entering an invalid filter in the defects grid header.Change Request: 98256 [internal] Problem: When working in a grid with two level groups applied, an error occurs and a red cross displays.Change Request: 103195 [internal] Problem: When clicking Cancel in the Required Defect Fields dialog box, the defect Summary is deleted.Change Request: 93263 [internal] Problem: When opening a new defect, if there is a workflow handler for the Move_To event that effects the UI, when clicking Submit, the UI structure of the Move_To event displays for a moment.Change Request: 97970 [internal] Problem: While a defect details dialog box is open, if you run a Go to Defect command, the selected defect should open within the same dialog box, rather than opening another dialog box.Change Request: 98743, 68194 [internal] Problem: The OK button of the Target Cycle/Release drop down should be enabled only when the correct type is selected.Change Request: 94847 [internal] Problem: The ALM Client does not support NTLM authentication by Web Server or Proxy.Change Request: 95482 [internal] Problem: The ALM Explorer does not work under Reverse Proxy with NTLM authentication configuration.Change Request: 95681[internal] Problem: Internet Explorer crashes when trying to login to Site Administration with McAfee SiteAdvisor enabled.Change Request: 178203 [internal] Problem: The following message is received during an MSI installation when UAC is ON:Cant find .NET 3.5 instead of Non admin user of UAC is ON cant continue installation.Change Request: 95487 [internal] Problem: ALM Explorer does not work under Web Server NTLM authentication.Change Request: 94558 [internal] Problem: The Progress bar is not shown during isolated deployment on machine running on Microsoft Windows XP after a common mode deployment.Change Request: 95600 [internal] Problem: When working with an ALM client and platform that require Basic Authentication, the Welcome Page and Help pages requires entering user credentials.Change Request: 79519 [internal] Problem: When you drag and drop or press the assign arrow of a test folder onto a coverage of a requirement, sometimes when the test folder contains a huge amount of tests, then the assign operation will have a very long duration and sometimes even a timeout error message would appear.Change Request: QCCR1J18992 Problem: When performing a Find/Replace function in the Requirements module it causes the browser to freeze.Change Request: 96992 [internal] Problem: When assigning a requirement folder to several release cycles, in a case where the folder contains a large amount of requirements and alerts are enabled for requirement changes, the operation performance is slow.Change Request: 95021 [internal] Problem: When cutting an entity, the cut entity remains in italics even if the paste operation is canceled.Change Request: 178396 [internal] Problem: When clicking the Reschedule button to reschedule a release, cycle, or milestone, the Reschedule dialog box opens twice.Change Request: 103590 [internal] Problem: In the Releases module, when opening the Scorecard tab for a release and drilling down to a KPI cell, part of the KPI Drill Down Result window is truncated.Change Request: 97644 [internal] Problem: When trying to reschedule a release in the Master Plan tab, the Object reference not set to an instance of an object error may display.Change Request: 99015 [internal] Problem: In the Progress and Quality tabs, some changes to the release, such as rescheduling a child cycle, are not updated in the view until the Refresh button is clicked.Change Request: 103968 [internal] Problem: After creating a new release folder, the Delete and Cut buttons remain disabled.Change Request: 97971 [internal] Problem: In the graph of the Releases module Progress tab, cycles are sorted by name while they should be sorted by start date.Change Request: 97507 [internal] Problem: When renaming a cycle, if the new name already exists, a message displays indicating that this is a duplicate name. After closing the message, the name should be restored to the previous name.Change Request: 94270 [internal] Problem: When adding new traceability to a requirement, the green indicator star in the tab does not display.Change Request: 97664 [internal] Problem: In the Requirement Coverage tab, the Full Coverage option is not working correctly with configurations. If two child requirements have test coverage with different configurations, only one of the child requirements is displayed when viewed from the parent requirement. In addition, the status displayed reflects only this one configuration.Change Request: 97262 [internal] Problem: In the Release Details dialog box, when clicking the Requirements assigned to release link, the previous filter in the Requirements module is not reset. This could cause some requirements assigned to the release not to be displayed.Change Request: 79519 [internal] Problem: When adding test coverage to a requirement, if the test folder contains a very large amount of tests, the operation will take a very long time and can timeout, and a timeout error message displays.Change Request: 97673 [internal] Problem: The workflow event GetDetailsPageName is not triggered in the Requirements module.Change Request: 97810 [internal] Problem: Displaying a requirement in the Requirement Traceability Matrix pane while the requirement is open in details mode will cause the requirement to lose all unsaved changes.Change Request: 103765 [internal] Problem: The dropdown for requirement types may not show all text of long type names.Limitation: The initial size of the dropdown is the same but it may be resized after opening. Change Request: 97884 [internal] Problem: Selecting a group in the send mail user list selects only the first user in the group.Change Request: 178504 [internal] Problem: When performing Move Up or Move Down operations on a requirement, the two surrounding requirements are moved too.Change Request: 93716 [internal] Problem: Values in the requirement tree name column are not fully visible when the name column is narrow.Change Request: 89263 [internal] Problem: In the Requirements module, in the Rich Text tab, after converting a hyperlink to text, the text formatting is lost.Change Request: 98298 [internal] Problem: When setting a filter that returns no records while zoomed in to a tree portion, you cannot refresh the tree, go back to the previous filter, or zoom out to view the whole tree.Change Request: 97639 [internal] Problem: If you select a requirement, add coverage to it in the Test Plan module, then navigate back to the same requirement, the lower pane of the coverage chart is empty.Change Request: 94903 [internal] Problem: While viewing the Design Steps tab in the Test Plan module, the DesignStep_MoveTo workflow event is not triggered when clicking Refresh.Change Request: 98973 [internal] Problem: In the Requirements Grid view, the Go To Requirement in Requirements Tree button is not visible after filtering by groups.Change Request: 98596 [internal] Problem: When creating a report from the analysis menu in the Requirements module, and there is an image in the rich text of a requirements which is included in the report, the image is not displayed.Change Request: 178641 [internal] Problem: When exporting the traceability matrix to Microsoft Excel, it is limited to 250 linked entities.Change Request: 97426 [internal] Problem: The font size of rich text cannot be changed manually.Change Request: 98629 [internal] Problem: When creating requirements from different subtypes, with a defined rich text template, the template is not updated according to sub-type.Change Request: 95085 [internal] Problem: When creating a requirement and changing its type from a type with a defined rich text template to a non-rich text defined, the rich text indicator is updated incorrectly.Change Request: 98566 [internal] Problem: In the traceability matrix, the column remains collapsed after selecting the full path option.Change Request: 98987 [internal] Problem: Favorite views fail to load in the Requirements module.Change Request: 103475 [internal] Problem: After configuring a traceability matrix, the requirement information (for example, description) is not saved.Change Request: 178320 [internal] Problem: The Creation Date and Creation Time fields are not displayed in the details dialog box.Change Request: 178325 [internal] Problem: In the Requirement Traceability tab, the Req: Requirement Type field remains empty although the requirement type is defined.Change Request: 94940 [internal] Problem: In the Risk Analysis View tab, the Ctrl + A, Ctrl + P, and Ctrl + G shortcut keys do not work properly.Change Request: 97340 [internal] Problem: The Requirements Grid shows only the root requirement in some navigation scenarios.Change Request: 84372 [internal] Problem: A warning is not displayed before you select the Expand All option.Change Request: 95389 [internal] Problem: Fails to access a called test in the Traceability Matrix.Change Request: 98902 [internal] Problem: In the Comparison Settings window, text strings are split to multiple lines.Change Request: 89243 [internal] Problem: In the Rich Text view, a new line character is displayed as part of the hyperlink link.Change Request: 89509 [internal] Problem: In the Rich Text view, an unclear error message is displayed after selecting a very large font size.Change Request: 92618 [internal] Problem: In the Rich Text view, when adding text without a corresponding URL, the OK button is still enabled.Change Request: 97804 [internal] Problem: The warning message for deleting a baseline is formatted incorrectly.Change Request: 91066 [internal] Problem: Some strings in the Risk Assessment tab are not localized.Change Request: 98902 [internal] Problem: In the Comparison Settings dialog box, a few text strings are displayed incorrectly.Change Request: 98401 [internal] Problem: A rich text document that contains special characters may also contain unknown symbols ?EUR.Change Request: 95641 [internal] Problem: When creating a cross-filter to display requirements with alerts, an exception error may occur.Change Request: 79510 [internal] Problem: After customizing the Business requirement type to support test coverage and setting coverage for such requirements, the Direct Cover Status field is not updated.Change Request: 67131 [internal] Problem: The GetChildrenList method returns only the first child.Change Request: 97312 [internal] Problem: Users without permission to delete requirement traceability links can still delete them.Change Request: 96148 [internal] Problem: A requirement type name cannot contain only numbers.Change Request: 80386 [internal] Problem: When setting RQ_TARGET_REL or RQ_TARGET_RCYC ] to a non-existent ID, an error message is not displayed.Change Request: 97039 [internal] Problem: A refresh problem occurs when selecting a requirement that at the same time another user is attempting to delete.Change Request: 98058 [internal] Problem: Unable to resize the Details tab in Requirements module.Change Request: 178828 [internal] Problem: The following limitation occurs after you add a new Direct Cover Status value in project customization, and then you assign the new value to your requirements. In the Requirements Grid view, the Direct Cover Status icon of this new value is not displayed in the grid.Change Request: 97280 [internal] Problem: The Show full path string is displayed incorrectly in the Traceability matrix.Change Request: 97229 [internal] Problem: In the Requirement Traceability view of the Requirement Details dialog box, the Select Columns option works incorrectly in the Relationships tab.Change Request: 97229 [internal] Problem: This problem occurs when adding the subsection Trace To or Trace From to a standard report in the Analysis Module. An exception error occurs when filtering on the Req: Requirement Type field.Change Request: 97661 Problem: Unable to filter by group items in the Test Coverage tab. [internal]Change Request: 98581 [internal] Problem: After saving changes in the Rich Text tab, the green indicator (*) remains visible.Change Request: 91777 [internal] Problem: The Copy option is removed from the Requirements Grid view.Change Request: 96385 [internal] Problem: A problem with the clickable arrow in the Requirement Name column.Change Request: 95023 [internal] Problem: After changing the requirement type, test coverage works incorrectly.Change Request: 103556 [internal] Problem: The Reviewed (RQ_REQ_REVIEWED) field is not available in Groups and Permissions > Permissions page.Change Request: 98008 [internal] Problem: SmartRep: Aligner can run while files are added to smart repository - and delete files which are in the middle of being added.Change Request: QCCR1J17128 Problem: QC 11 Failed to compare two elements in an array when importing a library. Change Request: 94724 [internal] Problem: When comparing rich text between requirements, the text is not fully shown.Change Request: 103235 [internal] Problem: The description in the first step of the Import Library Wizard has a disabled toolbar.Change Request: 96498 [internal] Problem: The Libraries synchronization process opens many QC connections which are not closed at the end of the synchronization process.Change Request: 97517 [internal] Problem: When viewing the details of a test from a baseline, the parameters, linked defects and covered requirements sections are marked as empty even if these sections are not empty.Change Request: 75354 [internal] Problem: When a test calls another test, the name of the called test in appears in the Design Steps tab, in the description of appropriate design step. The name of the called test is surrounded by < and > symbols. The name of the called test should be displayed both in the regular tests view and in the Compare Entities view (in a case of tests comparison).In a case where a test is inside a library and calls another test which is outside the library, and where the library is imported into another project, and user then compares the tests from the libraries, using the imported library as the current library, then the name of the called test is not displayed.Change Request: 97273 [internal] Problem: The Select Baseline step of the Import wizard fails when there are more than 50 roots in the library.Change Request: 96663 [internal] Problem: The user interface string in the Compare Baselines Tool window is cut in the Chinese versionChange Request: 98684 [internal] Problem: The user interface string in the Comparison Settings window for baselines is cut in the Russian version.Change Request: 97184 [internal] Problem: In the Comparison Settings dialog box there is a cut string in the Test tab Change Request: 96717 [internal] Problem: When comparing between two versions, memo fields which are not versioned are not marked as such by the <non-version field> prefixChange Request: 97321 [internal] Problem: The Toolbar in the Compare Libraries Tool dialog box can be hidden and cannot be shown until comparing again.Change Request: 89694 [internal] Problem: The tab order in the in the Compare Test Entities dialog box is not the same as in the details form.Change Request: 98067 [internal] Problem: The Compare Selected Baseline option is allowed while the library is unstable.Change Request: 97344 [internal] Problem: The description in step 3 on the Import Library wizard is not editable.Change Request: 97516 [internal] Problem: The Export Comparison Result to an Excel report has syntactic error if the word Items.Change Request: 103198 [internal] Problem: Text is cut in the RBQM description and in the Import Library verification report when the machines Locale is set to Hebrew.Change Request: 97614 [internal] Problem: The Import verification results presents the wrong number of entities that will be imported when there is a hiding filter.Change Request: 97440 [internal] Problem: Cannot import the Library due to a Fields Intersection failure. This might happen when trying to import between two projects with different versions.Change Request: 77170 [internal] Problem: There is a problem with import and sync when there are differences in requirement types between the projects.Change Request: 98061 [internal] Problem: Importing requirements fails if the requirement target parent type is illegal. There is a possibility to import the library and create a requirement type folder as a child of requirement type business (does not support folder child requirements). This means that while requirement import will fail, other library root types (for example, TEST) will be imported successfully.Change Request: 98326 [internal] Problem: Creating a baseline that contains more than 50 roots will fail with the following error message: Attempted to read or write protected memory.Change Request: 93279 [internal] Problem: In the Configuration dialog box, whenever the filter is long and a scroll bar appears in the filter control, the end of the filter is displayed and the user has to scroll up when first opening the configuration dialog. Also, whenever the filter control is disabled the text should be gray and not black.Change Request: 98184 [internal] Problem: The Show Full Path label is cut in the Traced from Requirements tab.Change Request: 97285 [internal] Problem: After creating a configuration for traceability matrix, navigating to requirement tree and using the Back functionality to return to the matrix, a different configuration is loaded.Change Request: 96879 [internal] Problem: The Generate Traceability Matrix button is enabled even when Excel is not installed on the machine. Change Request: 97689 [internal] Problem: When a favorite is deleted, its name is still displayed within the moduleChange Request: 98506 [internal] Problem: When creating a project by copying from an existing project, and choosing to copy only customization & private favorites, you cannot open or create favorite views in the project.Change Request: 97123 [internal] Problem: Memo fields: The toolbar only appears when the editor is in focus.Change Request: 96884 [internal] Problem: Memo fields: The first letters in every row are not visible. This happens on a right-to-left locale.Change Request: 98580 [internal] Problem: When spell checking and there are no spelling mistakes, the spelling dialog flickers .Change Request: 178595 [internal] Problem: Cannot upload attachment via HP ALM 11 REST API in version controlled project for non-version controlled entities (for example: cannot upload attachment for defect in versioned controlled project).Change Request: 178784 [internal] Problem: Rich text hidden attachments cant be downloaded via HP ALM 11 REST APIChange Request: 178685 [internal] Problem: Cannot filter according to the date in the Modified field.Change Request: QCCR1J19247 Problem: Document Generator is returning an error when embedding Office (2003/2007) attachment files.Change Request: 96148 [internal] Problem: Requirement is created as new added requirement type when trying to create requirement folder Limitation: A numeric requirement type name is not supportedChange Request: 179097 [internal] Problem: The shared Customization (cross project customization) can work only between template and linked projects which have the same extension Solution: If a project or template project is linked, the user should enable the same extensions on it. Limitation: The extension enablement is irreversible. In order to continue working with the shared customization, the user should pay attention that before enabling the customization that no project or template is linked to it.Change Request: QCCR1J17685 Problem: Public Favorite Views option is unavailable to copy when copy project to create new oneChange Request: QCCR1J17172 Problem: Repair tool does not affect items in the VC tablesChange Request: QCCR1J16972 Problem: Italian language settings error for SiteAdmin hh:mm:ss is not a valid timeChange Request: QCCR1J18395 Problem: Failed to Test Connection window does not appear while testing invalid connection string.Change Request: 103960 [internal] Problem: When deleting a project, an unclear error appears. The scenario occurs when defining a DB server in Site Administration with a user that does not have sufficient privileges to delete a project database.Change Request: 98218 [internal] Problem: When changing the Security Communication passphrase value from site admin to site configuration, you are required to restart HP ALM 11.Change Request: 103559 [internal] Problem: The OutOfMemory error appears when Import LDAP Users by Keyword function returns too many users.Change Request: 97744 [internal] Problem: Opening the License History dialog box produces an error of the license contains an unknown license type.Change Request: 97460 [internal] Problem: Full License and Additional ... licenses are not displayed after applying a filter with cleared parameters.Change Request: 94393 [internal] Problem: If you generating a graph and select Additional license, the graph contains a legend with incorrect labels.Change Request: 98777 [internal] Problem: Extra records appear in the License History dialog if Domain Pool was enabled.Change Request: 94389 [internal] Problem: When selecting the Full Licenses option, the License Usage graph shows all data for all licensesChange Request: 94534 [internal] Problem: Additional Host, Topology and Timeslots columns appear inside the License History tab.Change Request: QCCR1J19548 Problem: Multiple licenses are consumed when the same user connects from the same client machineChange Request: QCCR1J18053 Problem: There is no ability to select xlsx or docx formats when exporting from data grid view or reports to Excel and WordChange Request: 98781 [internal] Problem: Cannot add the ? character using the right ALT + L shortcut anywhere in ALM. Change Request: 97193 [internal] Problem: When creating a new release that does not respond to Data Hiding, and then trying to create a new cycle under it, the following error message appears: The object was deleted...Change Request: 95976 [internal] Problem: When working with Performance Center, the fields in the Filter dialog box in the Timeslots view are sorted in the wrong order.Change Request: QCCR1J15182 Problem: Problem with events on refreshChange Request: QCCR1J17831 Problem: Sub Bug_New not always triggered correctly when working with manual Business Component.Change Request: QCCR1J16598 Problem: TestFolder_MoveTo event and no way to know what folder is selectedChange Request: QCCR1J17670 Problem: Cannot Get select Requirement ID during Requirement Coverage action.Change Request: 178327 [internal] Problem: In the Test Lab module Execution Grid, you cannot enable/disable the Select Tests, Run, and Run Test Set toolbar buttons using workflow script. Limitation: Run and Selected Tests toolbar buttons cannot be disabled after the first time a user enters the Execution Grid after login. Entering the Execution Grid for the first time after login will always display the Run and Selected Tests toolbar buttons as enabled, regardless of the workflow script. Moving to another test set or test instance will successfully change the Run and Selected Tests according to the workflow script.Change Request: 82901 [internal] Problem: When adding a user-defined field for the Run entity, it does not display in the Manual Runner dialog box. Therefore, you cannot set user-defined fields for the Run entity as Required in the Project Entities page or through workflow.Change Request: 89843 [internal] Problem: In the Script Editor, navigating between new events in the Common script node generates a warning message.Change Request: 97388, 178404 [internal] Problem: After setting a certain list / values for a field of an entity through workflow, these values will appear for the field in the filter dialog which is opened when this entity is selected in a grid / tree. The values that should appear are those set originally in the customization for the field, in order to allow for filter modifications.Change Request: 98469, 98475, 98509, 98512, 178193 [internal] Problem: Events with the event name format used before ALM 11 are not triggered in new projects or projects created from upgraded projects.Change Request: 103617 [internal] Problem: Buttons created in the Toolbar Button Editor for the Manual Runner dialog box are not displayed in the Manual Runner.Change Request: 178199 [internal] Problem: The Analysis Item entity is not accessible in the Script Editor.Change Request: 178252, 103517 [internal] Problem: Buttons created in the Toolbar Button Editor are not displayed in the Releases, Dashboard, and Libraries modules.Change Request: 178339 [internal] Problem: When setting child requirements to inherit the Target Release and Target Cycle of the parent requirement via Workflow, an error message appears.Change Request: 178491 [internal] Problem: When opening a New Entity or Entity Details dialog box of a different module, toolbar buttons of the current module are displayed.Change Request: 103529 [internal] Problem: TestFolder_Fields and TestSetFolder_Fields are not accessible in the Script Editor.Change Request: QCCR1J15336 Problem: Parameters in Call to test not version compared.Change Request: QCCR1J17170 Problem: VC checks out process performance problems with a large amount of attachment history.Change Request: 99058 [internal] Problem: In the Update Selected dialog box, the legend for non-versioned fields should have space between the words.Change Request: 99057 [internal] Problem: In the Replace dialog box, there should be a legend for the asterisk (*) for non-versioned fields.Change Request: 83015 [internal] Problem: If the Site Administrator disables versioning for a project, and then enables versioning for that project, any attachment that was checked out before is no longer there.Change Request: 78094 [internal] Problem: When undoing a check out on the Requirements module, alerts are triggered.Change Request: 97748 [internal] Problem: When checking out a previous version of a test resource, user-defined fields are not restored to their previous values.Change Request: 97464 [internal] Problem: When importing a model in the Business Models module, the import status in the Import window is not translated to the current language.Change Request: 95587 [internal] Problem: There is an untranslated duplicate folder dialog box in the Business Models module.Change Request: 178390 [internal] Problem: When working in the Business Models module in the Linkage tab, clicking the Select Test button does not display the Test Plan Tree pane.Change Request: 87081 [internal] Problem: When importing a specific ProVision model, the text on the diagram is overwritten and does not display clearly. Limitation: A minor issue with Horizontal Lane names still exists.Change Request: QCCR1J15274 Problem: Unable to change order of data iterations in BPT data configurationsChange Request: QCCR1J15199 Problem: BPT Parameter display order is different in test configuration than what appears in component detailsChange Request: QCCR1J17130 Problem: SAP R&D] Execute Testset via OTA APIChange Request: QCCR1J16825 Problem: Test parameter issue with ALM 11.00 (patch 1) with BPTChange Request: QCCR1J15751 Problem: ALM 11 SP1: Unable to add design / manual steps to a component after automating it to scriptedChange Request: QCCR1J19074 Problem: A BPT remote agent is opened for each business process executed in a test setChange Request: 179024 [internal] Problem: Creating a user memo field for Business Components causes an error.Change Request: 95571 [internal] Problem: When a user imports a business model for the first time, the new Business Models folder in the Requirements module is not translated. The translation problem also appears when comparing different baselines containing the Business Models folder.Change Request: 97004 [internal] Problem: Pasting a folder/component into the root folder Components in the Business Components Module is not possibleChange Request: 97188 [internal] Problem: Parameter default value is not saved when saving using the Enter keyChange Request: 97403 [internal] Problem: Field layout in Components Details dialog box is incorrectChange Request: 96599 [internal] Problem: Version Control: When trying to clear unused components including components checked out by others, an unclear message is displayedChange Request: 94404 [internal] Problem: Cannot select root components folder as a destination for Convert Manual Test to ComponentChange Request: 91682 [internal] Problem: Unneeded version-related fields are visible for components.Change Request: 97077 [internal] Problem: An unclear message is displayed when deleting a component folderChange Request: 84105 [internal] Problem: Version Control: Redundant check-out request is displayed when trying to copy component steps in a versioned projectChange Request: 98280 [internal] Problem: Moving an entity with ID X to folder with ID X is not possibleChange Request: 98458 [internal] Problem: Find is not working correctly in the Components moduleChange Request: 96169 [internal] Problem: Impossible to view the Automation tab of a locked componentChange Request: 88880 [internal] Problem: The view of an old version of a scripted/keyword-driven component should be in read only modeChange Request: 103487 [internal] Problem: Version Control : An error is displayed when two users work on a requested component at the same timeChange Request: 97942 [internal] Problem: Allow editing of manual component steps after automating to a scripted componentChange Request: 85199 [internal] Problem: It is possible to open the BusinessComponentTemplate10 as a regular business component and modify it from within QuickTest Professional.Change Request: 97170 [internal] Problem: It is possible to create a new parameter in the history view.Change Request: 178581 [internal] Problem: Version Control : Requested components versioning status is not refreshed after creationChange Request: 178716 [internal] Problem: Error is displayed when trying to change component status to Not ImplementedChange Request: 98350 [internal] Problem: When running the Extension Deployment Tool on a UNIX operating system without the silent parameter, and without setting the DISPLAY environment variable, an unclear error message displays.Change Request: 97751 [internal] Problem: In localized ALM versions, in the Server Configuration Wizard, the browse button in the license panel may not display well.Change Request: 97880 [internal] Problem: When running the Extension Deployment Tool to undeploy an extension and canceling during the actual undeployment, the user cannot undeploy the same extension afterwards.Change Request: 97392 [internal] Problem: When trying to use text search on a filtered module, an error message displays.Change Request: 94431 [internal] Problem: Project Planning and Tracking (PPT) customization: An error is displayed when creating a new KPI type with the same name as a KPI that was just deleted.Change Request: 86721 [internal] Problem: In Project Planning and Tracking (PPT), the Alt+G shortcut key for generating graph does not work. with a limitation. Limitation: If the focus is outside ALM (for example, if the user has clicked the Internet Explorer address bar) the shortcut key only works if the user restores the focus to ALM by clicking the scorecard panel (the white area) or the scorecard title area.Change Request: 86724 [internal] Problem: In Project Planning and Tracking (PPT), the Alt+D shortcut key for setting the Release Scorecard Table Layout does not work. with a limitation. Limitation: If the focus is outside ALM (for example, if the user has clicked the Internet Explorer address bar) the shortcut key only works if the user restores the focus to ALM by clicking the scorecard panel (the white area) or the scorecard title area.Change Request: 97201 [internal] Problem: When users that are not part of an Admin or Project Manager group enter the Releases Module, they cannot set a filter or set selected columns because the buttons for these functionalities appear disabled.Change Request: 97377 & 97422 [internal] Problem: In the drop-down menu of the breakdown field in the configuration tab of a Covered Requirements KPI breakdown graph, the text of two menu items: Uncovered Requirements by Priority and Uncovered Requirements by Author are cut yielding two items that seem the same (Uncovered Requirements by)Change Request: 94658 [internal] Problem: Sometimes the PPT calculation fails causing Null Pointer Exception error to appear in the server logs. This happens when the scope created for the KPI analysis does not include any test instances.Change Request: 98319 [internal] Problem: When deleting a newly created KPI type before saving, an error message displays. In addition, you cannot delete a KPI Type if it is renamed but not yet saved.Change Request: 103771 [internal] Problem: Using the operator >= in a KPI filter for a Date type user-defined field results in an incorrect calculation.Change Request: 103979 [internal] Problem When trying to remove a scope item right after it is added to a milestone, the action does not succeed.Change Request: 178328 [internal] Problem: In the Release Scope tab, when creating a new scope item for a release, the sub tabs of the scope item content are not displayed until closing and reopening the card.Change Request: 103497 [internal] Problem: When trying to enable calculation for Project Planning and Tracking, if it is already enabled in Site Administration (for example from another instance of Site Administration), an unclear error message displays.Change Request: 97871 [internal] Problem: When a user that has been removed from the project tries to reconnect, an unclear error message appears.Change Request: 97499 [internal] Problem: In rare cases, a message indicating that the user was disconnected is displayed before receiving the session reconnect dialog box.Change Request: 98294 [internal] Problem: In the Defects module, the error message Your session has been disconnected sometimes displays, and the Defects module displays a red X.Change Request: 97706 [internal] Problem: You cannot copy files using FTP if the folder name is the same as the domain nameChange Request: 97638 [internal] Problem: You cannot upload more than 14,000 files using the extended storage API Note: The new limit is 100,000 files.Change Request: 97777 [internal] Problem: When aligning a project and uploading files at the same time through the repository explorer, a file corruption might occur.Change Request: 98278 [internal] Problem: When working with Oracle, you cannot add attachments to already created defects or run manual test with attachments.Change Request: QCCR1J15996 Problem: Pin to baseline does not take baselines req test coverage into account Logic to cover those errors was added to the Library-Sync mechanism.Change Request: QCCR1J17547 Problem: QTP script that using OTA failed on for each cycleChange Request: 99086 [internal] Problem: When using the AlertManager.AlertList(ALL) OTA API, ALM closes unexpectedly.Change Request: 98716 [internal] Problem: The ISupportCopyPaste and ISupportCopyPaste2 OTA API interfaces cannot not be used via a scripting language (for example, vbscript).Change Request: 98463 [internal] Problem: When copying on a UNIX machine, the Workflow and Components folders as well as repository files are not copied.Change Request: 98471 [internal] Problem: When copying a project, some lists are not copied.Change Request: 92839 [internal] Problem: When copying an active project, a problem may occur.Change Request: QCCR1J15144 Problem: Problem with Grouping and Sorting when Filtering in QC 10.00Change Request: 95528 [internal] Problem: When entering a manual filter in a module when filter was not in the correct format, the module closes unexpectedly.Change Request: 98487 [internal] Problem: Sometimes the upgrade project process fails.Change Request: QCCR1J18317 Problem: Call lock host before having any call to its remote agent and unlock it after all the callsChange Request: 91290 [internal] Problem: QC Sense reports do not have sorting functionality.Change Request: 94356 [internal] Problem: The filters in the QC Sense Server Configuration window are case sensitive, while they should not be case sensitive.Change Request: 97245 [internal] Problem: Insertion of illegal credentials in the QC Sense Server Configuration window causes an unhelpful error message to display.Change Request: 96770 [internal] Problem: Loading the default configuration in the QC Sense Server Configuration window deletes the database storage definitions.Limitation: QCCR1J17260 Problem: User must delete an isolated deployment folder to be able use the ALM client in the shared mode.Limitation: QCCR1J19243 Problem: On ALM11 with Service Test management installed, MSI generator fails to generate the MSI file. error: Failed to create ALM ClientLimitation: 179481 [Internal] Problem: STM11.1: Generate Component Wizard doesnt work with ALM11 QP2.Limitation: 180022 [Internal] Problem: Center - if defect has a filter with group by, the paste is disableLimitation: 180020 [Internal] Problem: Creating a new folder in APM throws an error.Limitation: 179677 [Internal] Problem: Automation tab is opened in read-only for Business Component after viewing it from Test Script tab.Limitation: 180077 [Internal] Problem: When adding a test with parameters and configurations to a test set, a Key not Found error occurs, and the UI is corruptedLimitation: 180109 [Internal] Problem: When User clicks on the refresh button while an indicator column is selected and filter is in grouping mode an error message will occur.Limitation: 179638 [Internal] Problem: Customers that are sharing BPT assets and work with Flow test type should contact support before installing this patchChange Request: QCCR1J19547 Problem: Multiple licenses are consumed when same user connects from same client machine SR (service requests)QCCR1J25187EnhancementYes TD4QC_00304: QCCR1J20785 A new site parameter, ATTACH_TOTAL_MAX_SIZE, limits the size of attachments for a specifric entity.QCCR1J27589 - Performance has been improved for ALM connected over a reverse proxy server.As of patch 12, HP ALM 11.00 is certified for Performance Center 11.00 Patch 7.Service Test is certified on MS SQL 2008 SP3 Service Test is certified on Red Hat 5.8 64-bit as a server operating systemQCCR1J24345 - You can now create cross filters in the Test Lab module's tree by Responsible Tester.QCCR1J18384 - A warning message, that is displayed when editing a called test's steps while the called test is running, was repeatedly displayed for every step. Now this message is displayed only once.QCCR1J25867 - In the Test Plan module, the state and position of the Test Configurations bottom pane under the test selection tree is now persistent for each user.QCCR1J20958 - Release scope items are defined by including requirements, tests, test sets, and defects. Now you can also filter which defects to include.In the Releases module > Release Scope tab, you can include one of the following: * Defects that match certain criteria. * Defects that are linked to certain requirements, tests, and test sets. Note: Links between defects and test sets also include indirect links to: Test instances, Runs and Steps. KPIs related to defects (such as Severe Defects) are calculated accordingly on scorecards, providing a greater measure of accuracy.QCCR1J25593 - MSI Generator now supports combinations of Registered and Shared files in the same locations.QCCR1J25594 - MSI packages now support deployment of multiple ALM servers.QCCR1J25296 - Silent installation is now available for SystemTest Agent. Note: The silent installation of SystemTest agent cannot be executed on Windows Vista and Windows 7 when User Account Control is enabled.QCCR1J22456 Login to ALM over HTTPS with client certificates is now supported.As of patch 10, HP ALM 11.00 is certified for the following servers, databases, and tools: * Oracle 11.2.0.3 * MS SQL 2008 SP3 * Windows 7 SP1 32Bit as Client OS * Red Hat 5.7 64bit as Server OS * Red Hat 5.8 64bit as Server OS * PC 11.00 Patch 6The following are some limitations relating to the new certifications: * STM, ST are not certified on Oracle 11.2.0.3, MS SQL 2008 SP3 * STM, ST are not certified on Windows 7 SP1 32 bit as client OS * STM, ST are not certified on Red Hat 5.7 64bit, Red Hat 5.8 64bit as server OS For an overall description of certified environments see the System Requirements section below.Performance and stability improvementsThe patch includes various performances and stability fixes. This patch is a critical and mandatory patch.The performance improvements include: Improvements on the server cache mechanism Memory utilization improvements due to background job changes Improvements to SQL queriesThe stability items include: Fixes of server deadlocks that resulted in sporadic crashes Fixes in the PC extension that caused server crashesControlling the size of the attachmentsDescription: A new parameter enables you to control the size of attachments. Solution: The site parameter UPLOAD_ATTACH_MAX_SIZE (size in KB) has been added. It controls the size of attachments added using OTA and in the User Interface. It does not control the size of attachments in integration tools.DEP compliance Description: ALM can work on operating systems with DEP turned on. CertificationsNew environment certified: See the details in the System Requirements section below.Certification limitations: STM is not certified on Windows 2008 R2 SP1 as a client STM is not certified on SUSE 10 SP4 x64 as server OS STM is not certified for MS SQL 2005 SP4 STM is not certified for ESXi 5.0 189583 BPT QTP Exec: In order to execute remotely a business process test on Win 2008 R2 - need to install "Com+Network access" application server role as part of QTP installation 190669 User which is not administrator cant run business process test on Windows 2008R2SP1 24320 Impossible to create new map for export by excel add-in export wizard on Windows 2008 R2 Server SP1 for non admin users 24082 When snapshot window is up additional IE window is displayed on Win2008R2 Server SP1 with side by side clients. (IE 8 only) 24140 Incorrect sysinfo on Windows 2008 and Windows 7Data Awareness Drop-down list in the Resource Parameter Name column which contains all the resource (Excel) headers. Auto-mapping via the Map Parameters dialog box. Data-table resource preview according to the predefined filter in the Test Configuration tab.Mail Support in Test Lab The user can send a test instance including details, history, attachments, run summary, and last run steps from Test Lab.Default Values Creating new entities, such as tests, test configurations, and defects, sometimes requires entering a large number of fields. Often the values for these fields are the same, and it is repetitive and time consuming to enter the values. For example, each time a QA engineer adds a new defect for the same environment in the same testing cycle, the values for the following defect fields are likely to be the same: Project, Detected in Cycle, Detected in Release, and Target Release.Enhancement ID: QCCR1J15578. The second parameter, send from, from the Send Mail API has the ability to be specified in the script. Enhancement ID: QCCR1J12285. You can select multiple tests/requirements and include them simultaneously to the coverage analysis feature. Enhancement ID: QCCR1J22088. There is a horizontal bar in the Test Plan.Site Administration Both administrators and non-administrators can start Site Administration. Instances of Quality Center 10.00 Site Administration can be opened side-by-side with instances of ALM 11.00 Site Administration. 3rd party tools can integrate Site Administration operations into their scripts by registering the Site Administration client component. For details, see the HP ALM Client Registration add-in on the HP ALM Add-ins page. Client MSI Generator The generated MSI package can now be installed on client machines with User Account Control enabled.Certifications BPT/BPTEE was certified for Win2008R2SP1, Oracle11.2.0.2, and VistaSP2x32. ST 11.2 was certified for Win2008R2SP1, and Oracle11.2.0.2.New environment certified: See the details in the System Requirements section below. Certification limitations: BPT, BPT4SAP, ST and STM are not certified on MS SQL 2008 R2 SP1. BPT, BPT4SAP, ST and STM are not certified on Windows Server 2008 SP2 32 bit as a client OS.CIT 2.6 support will be provided with this patch.Mobile App - Introducing the HP ALM Defect Management Mini Application for Mobile Devices Enterprise Collaboration - ALM 11.0 can be integrated with Enterprise Collaboration (EC).Customization Enhancement ID: 57375 [internal] Summary: A non-versioned field option was added to Project Customization, which is used to define whether or not to save versioning information for a field. When updating fields that are non-versioned for multi-entities using the Replace or Update selected options, if this option is selected, no check out dialog box displays. When viewing previous versions of an entity, fields that are not versioned are labeled as non-versioned. Enhancement ID: 63111 [internal] Summary: In Project Customization, in the Cross Project Customization page, you can now select whether to view all linked projects or only active ones.Project Planning and Tracking Enhancement ID: 57372 [internal] Summary: A drill down option was added to the Scorecard view in the Releases module. The option shows all the entities that create the scorecard KPI value. There is also an option to drill down by numerator or denominator.Business Planning Modeling Enhancement ID: 57393 [internal] Summary: Support was added for EPC Row/Column ARIS notations. Certification Enhancement ID: 178894 [internal] Summary: Windows Server 2008 R2 is now supportedTD4QC_00235: Customization Enhancement ID: 57375 [internal] Summary: A non-versioned field option was added to Project Customization, which is used to define whether or not to save versioning information for a field. When updating fields that are non-versioned for multi-entities using the Replace or Update selected options, if this option is selected, no check out dialog box displays. When viewing previous versions of an entity, fields that are not versioned are labeled as non-versioned. Enhancement ID: 63111 [internal] Summary: In Project Customization, in the Cross Project Customization page, you can now select whether to view all linked projects or only active ones.Project Planning and Tracking Enhancement ID: 57372 [internal] Summary: A drill down option was added to the Scorecard view in the Releases module. The option shows all the entities that create the scorecard KPI value. There is also an option to drill down by numerator or denominator.Business Planning Modeling Enhancement ID: 57393 [internal] Summary: Support was added for EPC Row/Column ARIS notations. Certification Enhancement ID: 178894 [internal] Summary: Windows Server 2008 R2 is now supportedYou can find all enhancements details inside the readme:ALM 11.00 is certified on Microsoft Office 2010Business Process Testing - Add the BPTEE functionality to the core BPT product. It is recommended to perform the project upgrade after installing this patchYou can find all enhancements details inside the readme.Change Request: 53509 NTLM support both for proxy and web authentication, to enable it for all configurations without the need in configuring the web gate.Note: To use ALM Explorer with NTLM, you use the new version from the Add-ins page.Change Request: 93580 In ALM 11 the requirements rich text feature was changed. Before ALM 11 it was MS Word document, shown in the ALM UI. The new rich text is stored as HTML page. Rich text, created before ALM 11, should be converted from the MS Word documents into HTML.For more information on Rich Text Conversion, see HP Software Self-solve knowledge base article KM1031602 http://support.openview.hp.com/selfsolve/document/Window 2008 R2 Server Windows 7 64 bit ClientTD4QC_00177: You can find all enhancments details inside the readme: Client Side by Side REST API Data-hiding filter for the Releases module Session Reconnect Automail for Repository Migration Status Performance improvements and more... Equivalent PatchNoneInstallation InformationPatch dependenciesNone Hardware dependenciesNone Other dependenciesNone Patch conflictsNone Automatic rebootNo Installation instructionsPlease review all instructions and the Hewlett-Packard SupportLine User Guide or your Hewlett-Packard support terms and conditions for precautions, scope of license, restrictions, and, limitation of liability and warranties, before installing this patch. ------------------------------------------------------------ 1. Back up your system before installing a patch.2. Extract files from TD4QC_00304.zip3. Follow the installation instructions from thereadme file Special installation instructionsReadme includes detailed instructions and limitations. Check system specifications for exact OS releases.ALM Consolidated (QC + PC) Installations ALM 11.0 patch 10 is certified only with PC 11.0 patch 06.UpgradeService Pack 3 fixes defects in the upgrade. If you are planning to upgrade to ALM 11.00, please follow this upgrade path: Install ALM GA/early patch ? Install SP3 ? UpgradeClient CertificationSoftware packages are using code signing to create a digital "shrink-wrap" for code and content to protect software publishers and users. Digital signatures authenticate the source (individual, organization or software vendor) and verify the integrity of content.The digital signature is renewed periodically (usually every several years). The digital signature is a digital "hand shake" between the installed package and the target computer. When the computer is connected to the Internet or regular updates are applied, the computer side is updated automatically.HP Software recently renewed its digital certification with VeriSign. VeriSign root certificate used to validate HP files was updated in order ensure the highest level of security, this might affects ALM Patch 7 version and above.If you face the following issue when trying to load the client: "Initialization has failed. Contact your system admin. For Details, see the Loader file." This is because you are missing the new root certificate on the client machine.For more up-to-date information please go to the following VeriSign KBs:Code signing 2048-bit Root Migration https://knowledge.verisign.com/support/ssl-certificates-support/index?page=content&id=AR1747&actp=search&viewlocale=en_USHow to install the 2048-bit Code Signing root and intermediate CA certificates? https://knowledge.verisign.com/support/ssl-certificates-support/index?page=content&actp=CROSSLINK&id=SO19140Workflow Setting any entitys Name field to be invisible using a workflow script does not affect the entitys Details dialog box. In QC 10.00, the message Field hidden by admin was displayed instead of the Name field.Customization Specifying less than 2,500 characters in userdefined fields (such as Description and Expected Results) in the Design steps tab or the Design Step Details dialog box can improve performance.Test Plan When exporting tests from Excel using the Excel add-in, if you try to export a test located in a hierarchy in the Test Plan Tree where the folder directly under the root Subject folder is also named Subject, an error message is displayed. Workaround: Rename the folder named Subject that is located directly under the root to a temporary name, perform the export from Excel, and then restore the original name of the folder.Sprinter To enable opening and running tests with HP ALM 11.00 Service Pack 3, HP Sprinter 11.00 Patch 9 must be installed. To install this patch, see the Sprinter Add-in page, Help > Add-ins Page > HP Sprinter. Patch contentsSupersedes
FilesetsNone Patch files\TD4QC_00304.zip What(1) outputNone: Sum outputNone |
如若内容造成侵权/违法违规/事实不符,请联系编程学习网邮箱:809451989@qq.com进行投诉反馈,一经查实,立即删除!
相关文章
- 干货丨自学成才秘籍!机器学习深度学习经典资料汇总(一)
《Brief History of Machine Learning》介绍:这是一篇介绍机器学习历史的文章,介绍很全面,从感知机、神经网络、决策树、SVM、Adaboost到随机森林、Deep Learning.《Deep Learning in Neural Networks: An Overview》介绍:这是瑞士人工智能实验室Jurgen …...
2024/4/20 5:10:36 - 2018年机器学习深度学习资料 全新汇总(不断更新),希望看到文章的朋友能够学到更多
向AI转型的程序员都关注了这个号???大数据挖掘DT数据分析 公众号: datadw注:机器学习资料篇目一共500条,篇目二开始更新本文提到链接 请查看原文 https://github.com/ty4z2008/Qix/blob/master/dl.md希望转载的朋友,你可以不用联系我.但…...
2024/4/21 1:42:07 - CVPR 2020 论文和开源项目合集(Papers with Code)
CVPR 2020 论文开源项目合集,同时欢迎各位大佬提交issue,分享CVPR 2020开源项目 【推荐阅读】 CVPR 2020 virtual ECCV 2020 论文开源项目合集来了:https://github.com/amusi/ECCV2020-Code 关于往年CV顶会论文(如ECCV 2020、C…...
2024/4/20 20:38:40 - CVPR2020 论文和代码合集
CVPR2020-Code CVPR 2020 论文开源项目合集,同时欢迎各位大佬提交issue,分享CVPR 2020开源项目 【推荐阅读】 CVPR 2020 virtual ECCV 2020 论文开源项目合集来了:https://github.com/amusi/ECCV2020-Code 关于往年CV顶会论文(…...
2024/5/5 10:40:03 - Andrej Karpathy的CVPR 2013 reading list
Unfortunately, I did not get a chance to attend this year’s CVPR conference for a few reasons — I didn’t have a paper, I started a summer internship at Google and didn’t want to put my awesome project (think: a ton of video dat…...
2024/4/20 20:38:38 - Second Earth
Second EarthWade Roush【出处】Technology Review, 110(4):38–48, July/August 2007 A thunderhead towers at knee level, throwing tiny lightning bolts at my shoes. I’m standing–rather, my avatar is standing–astride a giant map [SLurl] of the continental Uni…...
2024/4/20 20:38:37 - 量子力学控制着人的思想吗?
Is Quantum Mechanics Controlling Your Thoughts?原文链接:Discover 杂志,2009年,第二期【待译】Sciences weirdest realm may be responsible for photosynthesis, our sense of smell, and even consciousness itself.Graham Fleming sit…...
2024/4/21 1:42:05 - 关于nvme固态硬盘安装系统的一点经验
事情的起因是因为自己想攒一台台式机,赶着降价先把固态硬盘买了回来,金士顿的A1000 nvme 250G ,买回来以为系统和平时一样。结果发现大部分的老毛桃,大白菜,黑鲨,微PE均不能很好识别NVME格式的硬盘…...
2024/4/21 1:42:04 - 固态硬盘ssd的寿命如何计算,固态硬盘质量怎么检测?
固态硬盘ssd的寿命如何计算,固态硬盘质量怎么检测? ① 机械硬盘的寿命一般是用使用(通电)时间来计算的,比如500GB机械硬盘通电20000个小时。 ② 固态硬盘ssd 不能用通常的通电时间来计算。 固态硬盘并不能用通电时间来衡量,固态硬…...
2024/4/21 1:42:04 - i5-7400+七彩虹H110M-T全固态版+GTX1050黑苹果Clover
i5-7400七彩虹H110M-T全固态版GTX1050github下载...
2024/4/21 1:42:02 - uefi引导固态硬盘ssd装win10(不用U盘)
重要提示:装系统有风险,没有相应技术积累请勿轻易尝试,如发生意外与作者无关。 近期由于新入手一块固态硬盘,想要用uefi引导装双系统,但是手头只有一个500G移动硬盘(包含重要资料),没…...
2024/4/21 1:42:01 - 老版本MACBOOK更换固态硬盘教程
2015年买的2015款early版本,硬盘是128g的,当时够用,后面逐渐不够用,经常报存储空间吃紧,虽然能用,但是有强迫症,总感觉要满了,所以看了下京东,发现固态硬盘500g的只要369…...
2024/4/21 1:42:00 - 固态硬盘+机械硬盘,ubuntu分区方案
推荐方案 /boot 200M / 20G /home 50G 余下空间 swap 16G 下面就清楚了,点击/dev/sda这里,然后选择新建分区表,然后选中新出现的标记空闲的子选项,选择添加...
2024/4/21 1:41:59 - X1 CARBON加装固态
X1 CARBON 5th 加装固态不要被网上科普carbon只能换不能加固态的说法蒙蔽了双眼嘿嘿嘿 日前在给x1carbon升级维护,因为日常工作原因,电池的容量已被我损耗至只有出厂时的40%,无奈只好 买来电池自己换上,拆机后发现一闲置卡槽&…...
2024/4/21 1:41:58 - 小米pro加装固态硬盘以及拆机方法
昨天买了一块512G的固态硬盘,然后准备给pro(mx150版)换上去,发现要拆开后盖还挺难的,于是一顿百度并没有什么结果,转而咨询客服,然后顺利解决了,遂记之以便以后加内存条使用。 第一…...
2024/4/21 1:41:57 - 国内首款全国产固态硬盘控制芯片发布
4月22日,国科微与龙芯中科战略合作签约暨国内首款全国产固态硬盘控制芯片发布仪式在北京人民大会堂举行。双方将建立长期稳定的业务合作伙伴关系,携手打造关键信息基础设施国产化生态。作为首个战略合作成果,国科微发布全新的GK2302系列芯片&…...
2024/4/21 1:41:57 - Mac检查固态硬盘状态————附带自己更换ssd
文章目录1 起因2 解决3 后记1 起因 由于笔记本用了5年多,128G内存实在不够用(主要插口齐全,最新更新的macbookpro有没有太大的亮点,等更新mini-led和14寸窄面屏),于是计划在某宝入手一个原装的ssd固态硬盘…...
2024/4/21 1:41:55 - 联想笔记本win10系统加装SSD固态硬盘,系统迁移流程
前几年的联想笔记本原始只配置一个机械硬盘,系统为win10系统,随着时间推移运行速度比较慢,很多情况下考虑加装SSD并进行系统迁移,操作要点繁琐,不同型号的具体操作流程都差不多&…...
2024/4/21 1:41:55 - 联想G40-70固态安装教程(实际操作经验)
##联想G40-70固态安装教程 ## 安装步骤总览: 基本步骤:固态硬盘选择、固态硬盘安装到计算机原机械硬盘位、机械硬盘安装到硬盘托架内,硬盘托架插入光驱位(没有光驱位的,不建议安装固态硬盘,因为机械硬盘就得舍弃掉&…...
2024/4/21 1:41:53 - Dell 灵越7559笔记本电脑加M.2固态硬盘
整体流程 确定自己需要的固态硬盘接口类型和主板支持的协议类型找符合自己刚才需求的固态硬盘,列出可选项权衡后选择购买拆机,断电,安装固态硬盘从windows官网上下载windows10安装程序,制作U盘作为系统引导盘。将系统安装在固态硬…...
2024/4/20 3:13:37
最新文章
- 能将图片转为WebP格式的WebP Server Go
本文完成于 2023 年 11 月 之前老苏介绍过 webp2jpg-online,可以将 webp 格式的图片,转为 jpg 等,今天介绍的 WebP Server Go 是将 jpg 等转为 webp 格式 文章传送门:多功能图片转换器webp2jpg-online 什么是 WebP ? WebP 它是由…...
2024/5/5 10:47:37 - 梯度消失和梯度爆炸的一些处理方法
在这里是记录一下梯度消失或梯度爆炸的一些处理技巧。全当学习总结了如有错误还请留言,在此感激不尽。 权重和梯度的更新公式如下: w w − η ⋅ ∇ w w w - \eta \cdot \nabla w ww−η⋅∇w 个人通俗的理解梯度消失就是网络模型在反向求导的时候出…...
2024/3/20 10:50:27 - Spring Boot项目启动时执行指定的方法
项目场景: 本文介绍Spring Boot项目启动时执行指定的方法两种常用方式和他们之间的区别。 实现方案: 方式一:使用注解PostConstruct Component public class PostConstructTest {PostConstructpublic void postConstruct() {System.out.prin…...
2024/5/4 2:36:28 - PHP+python高校教务处工作管理系统q535p
开发语言:php 后端框架:Thinkphp/Laravel 前端框架:vue.js 服务器:apache 数据库:mysql 运行环境:phpstudy/wamp/xammp等 系统根据现有的管理模块进行开发和扩展,采用面向对象的开发的思想和结构化的开发方…...
2024/5/4 12:52:44 - 路径规划——搜索算法详解(五):Dynamic A Star(D*)算法详解与Matlab代码
昨天休息了一天,今天继续学习搜索算法!前几天已经分别介绍了Dijkstra算法、Floyd算法、RRT算法、A*算法,无独有偶,上述算法都只适用于静态环境下两点规划的场景,但是大部分场景是实时变化的,这对规划算法提…...
2024/5/5 8:42:59 - 【外汇早评】美通胀数据走低,美元调整
原标题:【外汇早评】美通胀数据走低,美元调整昨日美国方面公布了新一期的核心PCE物价指数数据,同比增长1.6%,低于前值和预期值的1.7%,距离美联储的通胀目标2%继续走低,通胀压力较低,且此前美国一季度GDP初值中的消费部分下滑明显,因此市场对美联储后续更可能降息的政策…...
2024/5/4 23:54:56 - 【原油贵金属周评】原油多头拥挤,价格调整
原标题:【原油贵金属周评】原油多头拥挤,价格调整本周国际劳动节,我们喜迎四天假期,但是整个金融市场确实流动性充沛,大事频发,各个商品波动剧烈。美国方面,在本周四凌晨公布5月份的利率决议和新闻发布会,维持联邦基金利率在2.25%-2.50%不变,符合市场预期。同时美联储…...
2024/5/4 23:54:56 - 【外汇周评】靓丽非农不及疲软通胀影响
原标题:【外汇周评】靓丽非农不及疲软通胀影响在刚结束的周五,美国方面公布了新一期的非农就业数据,大幅好于前值和预期,新增就业重新回到20万以上。具体数据: 美国4月非农就业人口变动 26.3万人,预期 19万人,前值 19.6万人。 美国4月失业率 3.6%,预期 3.8%,前值 3…...
2024/5/4 23:54:56 - 【原油贵金属早评】库存继续增加,油价收跌
原标题:【原油贵金属早评】库存继续增加,油价收跌周三清晨公布美国当周API原油库存数据,上周原油库存增加281万桶至4.692亿桶,增幅超过预期的74.4万桶。且有消息人士称,沙特阿美据悉将于6月向亚洲炼油厂额外出售更多原油,印度炼油商预计将每日获得至多20万桶的额外原油供…...
2024/5/4 23:55:17 - 【外汇早评】日本央行会议纪要不改日元强势
原标题:【外汇早评】日本央行会议纪要不改日元强势近两日日元大幅走强与近期市场风险情绪上升,避险资金回流日元有关,也与前一段时间的美日贸易谈判给日本缓冲期,日本方面对汇率问题也避免继续贬值有关。虽然今日早间日本央行公布的利率会议纪要仍然是支持宽松政策,但这符…...
2024/5/4 23:54:56 - 【原油贵金属早评】欧佩克稳定市场,填补伊朗问题的影响
原标题:【原油贵金属早评】欧佩克稳定市场,填补伊朗问题的影响近日伊朗局势升温,导致市场担忧影响原油供给,油价试图反弹。此时OPEC表态稳定市场。据消息人士透露,沙特6月石油出口料将低于700万桶/日,沙特已经收到石油消费国提出的6月份扩大出口的“适度要求”,沙特将满…...
2024/5/4 23:55:05 - 【外汇早评】美欲与伊朗重谈协议
原标题:【外汇早评】美欲与伊朗重谈协议美国对伊朗的制裁遭到伊朗的抗议,昨日伊朗方面提出将部分退出伊核协议。而此行为又遭到欧洲方面对伊朗的谴责和警告,伊朗外长昨日回应称,欧洲国家履行它们的义务,伊核协议就能保证存续。据传闻伊朗的导弹已经对准了以色列和美国的航…...
2024/5/4 23:54:56 - 【原油贵金属早评】波动率飙升,市场情绪动荡
原标题:【原油贵金属早评】波动率飙升,市场情绪动荡因中美贸易谈判不安情绪影响,金融市场各资产品种出现明显的波动。随着美国与中方开启第十一轮谈判之际,美国按照既定计划向中国2000亿商品征收25%的关税,市场情绪有所平复,已经开始接受这一事实。虽然波动率-恐慌指数VI…...
2024/5/4 23:55:16 - 【原油贵金属周评】伊朗局势升温,黄金多头跃跃欲试
原标题:【原油贵金属周评】伊朗局势升温,黄金多头跃跃欲试美国和伊朗的局势继续升温,市场风险情绪上升,避险黄金有向上突破阻力的迹象。原油方面稍显平稳,近期美国和OPEC加大供给及市场需求回落的影响,伊朗局势并未推升油价走强。近期中美贸易谈判摩擦再度升级,美国对中…...
2024/5/4 23:54:56 - 【原油贵金属早评】市场情绪继续恶化,黄金上破
原标题:【原油贵金属早评】市场情绪继续恶化,黄金上破周初中国针对于美国加征关税的进行的反制措施引发市场情绪的大幅波动,人民币汇率出现大幅的贬值动能,金融市场受到非常明显的冲击。尤其是波动率起来之后,对于股市的表现尤其不安。隔夜美国股市出现明显的下行走势,这…...
2024/5/4 18:20:48 - 【外汇早评】美伊僵持,风险情绪继续升温
原标题:【外汇早评】美伊僵持,风险情绪继续升温昨日沙特两艘油轮再次发生爆炸事件,导致波斯湾局势进一步恶化,市场担忧美伊可能会出现摩擦生火,避险品种获得支撑,黄金和日元大幅走强。美指受中美贸易问题影响而在低位震荡。继5月12日,四艘商船在阿联酋领海附近的阿曼湾、…...
2024/5/4 23:54:56 - 【原油贵金属早评】贸易冲突导致需求低迷,油价弱势
原标题:【原油贵金属早评】贸易冲突导致需求低迷,油价弱势近日虽然伊朗局势升温,中东地区几起油船被袭击事件影响,但油价并未走高,而是出于调整结构中。由于市场预期局势失控的可能性较低,而中美贸易问题导致的全球经济衰退风险更大,需求会持续低迷,因此油价调整压力较…...
2024/5/4 23:55:17 - 氧生福地 玩美北湖(上)——为时光守候两千年
原标题:氧生福地 玩美北湖(上)——为时光守候两千年一次说走就走的旅行,只有一张高铁票的距离~ 所以,湖南郴州,我来了~ 从广州南站出发,一个半小时就到达郴州西站了。在动车上,同时改票的南风兄和我居然被分到了一个车厢,所以一路非常愉快地聊了过来。 挺好,最起…...
2024/5/4 23:55:06 - 氧生福地 玩美北湖(中)——永春梯田里的美与鲜
原标题:氧生福地 玩美北湖(中)——永春梯田里的美与鲜一觉醒来,因为大家太爱“美”照,在柳毅山庄去寻找龙女而错过了早餐时间。近十点,向导坏坏还是带着饥肠辘辘的我们去吃郴州最富有盛名的“鱼头粉”。说这是“十二分推荐”,到郴州必吃的美食之一。 哇塞!那个味美香甜…...
2024/5/4 23:54:56 - 氧生福地 玩美北湖(下)——奔跑吧骚年!
原标题:氧生福地 玩美北湖(下)——奔跑吧骚年!让我们红尘做伴 活得潇潇洒洒 策马奔腾共享人世繁华 对酒当歌唱出心中喜悦 轰轰烈烈把握青春年华 让我们红尘做伴 活得潇潇洒洒 策马奔腾共享人世繁华 对酒当歌唱出心中喜悦 轰轰烈烈把握青春年华 啊……啊……啊 两…...
2024/5/4 23:55:06 - 扒开伪装医用面膜,翻六倍价格宰客,小姐姐注意了!
原标题:扒开伪装医用面膜,翻六倍价格宰客,小姐姐注意了!扒开伪装医用面膜,翻六倍价格宰客!当行业里的某一品项火爆了,就会有很多商家蹭热度,装逼忽悠,最近火爆朋友圈的医用面膜,被沾上了污点,到底怎么回事呢? “比普通面膜安全、效果好!痘痘、痘印、敏感肌都能用…...
2024/5/5 8:13:33 - 「发现」铁皮石斛仙草之神奇功效用于医用面膜
原标题:「发现」铁皮石斛仙草之神奇功效用于医用面膜丽彦妆铁皮石斛医用面膜|石斛多糖无菌修护补水贴19大优势: 1、铁皮石斛:自唐宋以来,一直被列为皇室贡品,铁皮石斛生于海拔1600米的悬崖峭壁之上,繁殖力差,产量极低,所以古代仅供皇室、贵族享用 2、铁皮石斛自古民间…...
2024/5/4 23:55:16 - 丽彦妆\医用面膜\冷敷贴轻奢医学护肤引导者
原标题:丽彦妆\医用面膜\冷敷贴轻奢医学护肤引导者【公司简介】 广州华彬企业隶属香港华彬集团有限公司,专注美业21年,其旗下品牌: 「圣茵美」私密荷尔蒙抗衰,产后修复 「圣仪轩」私密荷尔蒙抗衰,产后修复 「花茵莳」私密荷尔蒙抗衰,产后修复 「丽彦妆」专注医学护…...
2024/5/4 23:54:58 - 广州械字号面膜生产厂家OEM/ODM4项须知!
原标题:广州械字号面膜生产厂家OEM/ODM4项须知!广州械字号面膜生产厂家OEM/ODM流程及注意事项解读: 械字号医用面膜,其实在我国并没有严格的定义,通常我们说的医美面膜指的应该是一种「医用敷料」,也就是说,医用面膜其实算作「医疗器械」的一种,又称「医用冷敷贴」。 …...
2024/5/4 23:55:01 - 械字号医用眼膜缓解用眼过度到底有无作用?
原标题:械字号医用眼膜缓解用眼过度到底有无作用?医用眼膜/械字号眼膜/医用冷敷眼贴 凝胶层为亲水高分子材料,含70%以上的水分。体表皮肤温度传导到本产品的凝胶层,热量被凝胶内水分子吸收,通过水分的蒸发带走大量的热量,可迅速地降低体表皮肤局部温度,减轻局部皮肤的灼…...
2024/5/4 23:54:56 - 配置失败还原请勿关闭计算机,电脑开机屏幕上面显示,配置失败还原更改 请勿关闭计算机 开不了机 这个问题怎么办...
解析如下:1、长按电脑电源键直至关机,然后再按一次电源健重启电脑,按F8健进入安全模式2、安全模式下进入Windows系统桌面后,按住“winR”打开运行窗口,输入“services.msc”打开服务设置3、在服务界面,选中…...
2022/11/19 21:17:18 - 错误使用 reshape要执行 RESHAPE,请勿更改元素数目。
%读入6幅图像(每一幅图像的大小是564*564) f1 imread(WashingtonDC_Band1_564.tif); subplot(3,2,1),imshow(f1); f2 imread(WashingtonDC_Band2_564.tif); subplot(3,2,2),imshow(f2); f3 imread(WashingtonDC_Band3_564.tif); subplot(3,2,3),imsho…...
2022/11/19 21:17:16 - 配置 已完成 请勿关闭计算机,win7系统关机提示“配置Windows Update已完成30%请勿关闭计算机...
win7系统关机提示“配置Windows Update已完成30%请勿关闭计算机”问题的解决方法在win7系统关机时如果有升级系统的或者其他需要会直接进入一个 等待界面,在等待界面中我们需要等待操作结束才能关机,虽然这比较麻烦,但是对系统进行配置和升级…...
2022/11/19 21:17:15 - 台式电脑显示配置100%请勿关闭计算机,“准备配置windows 请勿关闭计算机”的解决方法...
有不少用户在重装Win7系统或更新系统后会遇到“准备配置windows,请勿关闭计算机”的提示,要过很久才能进入系统,有的用户甚至几个小时也无法进入,下面就教大家这个问题的解决方法。第一种方法:我们首先在左下角的“开始…...
2022/11/19 21:17:14 - win7 正在配置 请勿关闭计算机,怎么办Win7开机显示正在配置Windows Update请勿关机...
置信有很多用户都跟小编一样遇到过这样的问题,电脑时发现开机屏幕显现“正在配置Windows Update,请勿关机”(如下图所示),而且还需求等大约5分钟才干进入系统。这是怎样回事呢?一切都是正常操作的,为什么开时机呈现“正…...
2022/11/19 21:17:13 - 准备配置windows 请勿关闭计算机 蓝屏,Win7开机总是出现提示“配置Windows请勿关机”...
Win7系统开机启动时总是出现“配置Windows请勿关机”的提示,没过几秒后电脑自动重启,每次开机都这样无法进入系统,此时碰到这种现象的用户就可以使用以下5种方法解决问题。方法一:开机按下F8,在出现的Windows高级启动选…...
2022/11/19 21:17:12 - 准备windows请勿关闭计算机要多久,windows10系统提示正在准备windows请勿关闭计算机怎么办...
有不少windows10系统用户反映说碰到这样一个情况,就是电脑提示正在准备windows请勿关闭计算机,碰到这样的问题该怎么解决呢,现在小编就给大家分享一下windows10系统提示正在准备windows请勿关闭计算机的具体第一种方法:1、2、依次…...
2022/11/19 21:17:11 - 配置 已完成 请勿关闭计算机,win7系统关机提示“配置Windows Update已完成30%请勿关闭计算机”的解决方法...
今天和大家分享一下win7系统重装了Win7旗舰版系统后,每次关机的时候桌面上都会显示一个“配置Windows Update的界面,提示请勿关闭计算机”,每次停留好几分钟才能正常关机,导致什么情况引起的呢?出现配置Windows Update…...
2022/11/19 21:17:10 - 电脑桌面一直是清理请关闭计算机,windows7一直卡在清理 请勿关闭计算机-win7清理请勿关机,win7配置更新35%不动...
只能是等着,别无他法。说是卡着如果你看硬盘灯应该在读写。如果从 Win 10 无法正常回滚,只能是考虑备份数据后重装系统了。解决来方案一:管理员运行cmd:net stop WuAuServcd %windir%ren SoftwareDistribution SDoldnet start WuA…...
2022/11/19 21:17:09 - 计算机配置更新不起,电脑提示“配置Windows Update请勿关闭计算机”怎么办?
原标题:电脑提示“配置Windows Update请勿关闭计算机”怎么办?win7系统中在开机与关闭的时候总是显示“配置windows update请勿关闭计算机”相信有不少朋友都曾遇到过一次两次还能忍但经常遇到就叫人感到心烦了遇到这种问题怎么办呢?一般的方…...
2022/11/19 21:17:08 - 计算机正在配置无法关机,关机提示 windows7 正在配置windows 请勿关闭计算机 ,然后等了一晚上也没有关掉。现在电脑无法正常关机...
关机提示 windows7 正在配置windows 请勿关闭计算机 ,然后等了一晚上也没有关掉。现在电脑无法正常关机以下文字资料是由(历史新知网www.lishixinzhi.com)小编为大家搜集整理后发布的内容,让我们赶快一起来看一下吧!关机提示 windows7 正在配…...
2022/11/19 21:17:05 - 钉钉提示请勿通过开发者调试模式_钉钉请勿通过开发者调试模式是真的吗好不好用...
钉钉请勿通过开发者调试模式是真的吗好不好用 更新时间:2020-04-20 22:24:19 浏览次数:729次 区域: 南阳 > 卧龙 列举网提醒您:为保障您的权益,请不要提前支付任何费用! 虚拟位置外设器!!轨迹模拟&虚拟位置外设神器 专业用于:钉钉,外勤365,红圈通,企业微信和…...
2022/11/19 21:17:05 - 配置失败还原请勿关闭计算机怎么办,win7系统出现“配置windows update失败 还原更改 请勿关闭计算机”,长时间没反应,无法进入系统的解决方案...
前几天班里有位学生电脑(windows 7系统)出问题了,具体表现是开机时一直停留在“配置windows update失败 还原更改 请勿关闭计算机”这个界面,长时间没反应,无法进入系统。这个问题原来帮其他同学也解决过,网上搜了不少资料&#x…...
2022/11/19 21:17:04 - 一个电脑无法关闭计算机你应该怎么办,电脑显示“清理请勿关闭计算机”怎么办?...
本文为你提供了3个有效解决电脑显示“清理请勿关闭计算机”问题的方法,并在最后教给你1种保护系统安全的好方法,一起来看看!电脑出现“清理请勿关闭计算机”在Windows 7(SP1)和Windows Server 2008 R2 SP1中,添加了1个新功能在“磁…...
2022/11/19 21:17:03 - 请勿关闭计算机还原更改要多久,电脑显示:配置windows更新失败,正在还原更改,请勿关闭计算机怎么办...
许多用户在长期不使用电脑的时候,开启电脑发现电脑显示:配置windows更新失败,正在还原更改,请勿关闭计算机。。.这要怎么办呢?下面小编就带着大家一起看看吧!如果能够正常进入系统,建议您暂时移…...
2022/11/19 21:17:02 - 还原更改请勿关闭计算机 要多久,配置windows update失败 还原更改 请勿关闭计算机,电脑开机后一直显示以...
配置windows update失败 还原更改 请勿关闭计算机,电脑开机后一直显示以以下文字资料是由(历史新知网www.lishixinzhi.com)小编为大家搜集整理后发布的内容,让我们赶快一起来看一下吧!配置windows update失败 还原更改 请勿关闭计算机&#x…...
2022/11/19 21:17:01 - 电脑配置中请勿关闭计算机怎么办,准备配置windows请勿关闭计算机一直显示怎么办【图解】...
不知道大家有没有遇到过这样的一个问题,就是我们的win7系统在关机的时候,总是喜欢显示“准备配置windows,请勿关机”这样的一个页面,没有什么大碍,但是如果一直等着的话就要两个小时甚至更久都关不了机,非常…...
2022/11/19 21:17:00 - 正在准备配置请勿关闭计算机,正在准备配置windows请勿关闭计算机时间长了解决教程...
当电脑出现正在准备配置windows请勿关闭计算机时,一般是您正对windows进行升级,但是这个要是长时间没有反应,我们不能再傻等下去了。可能是电脑出了别的问题了,来看看教程的说法。正在准备配置windows请勿关闭计算机时间长了方法一…...
2022/11/19 21:16:59 - 配置失败还原请勿关闭计算机,配置Windows Update失败,还原更改请勿关闭计算机...
我们使用电脑的过程中有时会遇到这种情况,当我们打开电脑之后,发现一直停留在一个界面:“配置Windows Update失败,还原更改请勿关闭计算机”,等了许久还是无法进入系统。如果我们遇到此类问题应该如何解决呢࿰…...
2022/11/19 21:16:58 - 如何在iPhone上关闭“请勿打扰”
Apple’s “Do Not Disturb While Driving” is a potentially lifesaving iPhone feature, but it doesn’t always turn on automatically at the appropriate time. For example, you might be a passenger in a moving car, but your iPhone may think you’re the one dri…...
2022/11/19 21:16:57